sample-temperature-controller Downloads
88 downloads found
Applications: Dual temperature controller for e.g. all JCT heated sample lines. Dual temperature controller with additional excess temperature limiter via mechanical relays in case of alarm. Single temperature controller (Triac or SSR) with limiter function ...
Applications: Temperature controller for e.g. heated sampling tubes JER-EH. Temperature control for devices without temperature sensor in 4 sections between -20°C and +250°C. ...
The sample is simply introduced to the measurement chamber via pipette. Then the VISCOlab 5000 takes over, controlling the temperature, measuring the viscosity, processing the data and reporting the results on the screen or optional printer. The tests are performed at the desired temperature through an imbedded Peltier ...
The sample extraction system is designed for primary conditioning of the sample gas. Combining a temperature-controlled conditioning unit and a heated sampling line ensures integrity of the sample gas. The sample gas is then dried (moisture removed) as required and introduced ...
How: One hundred percent of the sample moisture is absorbed by a phosphorus pentoxide (P2O5) film that covers two spirally-wound electrodes embedded in a hollow glass tube. When the sample gas enters the cell at a known flow rate, the film absorbs all the moisture molecules present. ...
In this autosampler the sampling module is mounted separately above the lockable, high-performance, refrigeration compartment so it can be programmed and/or interrogated without disturbing the temperature controlled samples. The AQUA-S200 can be combined with any of the nonintegral range of Sample Collection Vessels. Additionally, this model can be combined with an optional, lockable, tamperproof ...
The High Temperature Stage is designed to provide user a low-cost solution for two and four probe measurement option. The Conventional systems uses a very large size AC Furnace. The load is only a small piece of sample. Therefore, it is not necessary to use a large furnace. There is another disadvantage of using a large size AC furnace, the heating is abrupt/Fluctuating and colling is not ...
FreeZone Triad Benchtop Freeze Dryers are designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration ...
FreeZone Triad Benchtop Freeze Dryers are designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration ...
The sensor head includes a miniature interferometer, with input optics and infrared detector, drive and sampling electronics, and temperature controllers. The portable computer contains all data acquisition and interface electronics required for driving the sensor head, and runs the D&P proprietary display and control software. ...
The Sykam S 600 System is Sykam’s most advanced versatile modular HPLC system for the demanding chromatographer. The S 600 range consists of micro, analytical and semi-preparative pumps, an autosampler with a capacity of 120 samples and optional sample temperature control, column ovens and a range of detectors. Apart from complete automated PC-controlled configurations, the modular nature ...
Incorporated within the AQUA-COOLBOX is a high performance passive Sample Temperature Control System. This ensures that the collected samples are preserved at an optimal temperature 0 °C (32°F) to 5 °C (41°F) up to five days, while awaiting collection / inspection. This is particularly useful when sampling biologically active wastewater The AQUA-COOLBOX is designed typically to ...
Single source & multi-zone solar simulation. Combines various measurement methods in a single instrument. Automated sample loading / unloading. Customized contacting systems. Programmable measurement sequences. Bifacial illumination option. Sample temperature control. ...
The CV-100 with disposable tube greatly reduces testing time because instrument cleaning is not required. Viscosity of the sample is determined by measuring the falling time of a controlled needle through a predetermined distance of the fluid held in a sample tube. ...
The sampling system removes moisture from the sample stream and automatically purges accumulated water. An optional PID controller may be used for feedback loop control using outlet H2S gas concentrations as the control mechanism. ...
In the past, hot plates were used to digest samples where common digestion problems involved rusting, cross contamination of digestion system to sample, and poor sample temperature control. ...
Automatic 2 point calibration? Sample temperature control? On-line diagnosticsFirstFactsDissolved Oxygen? ...
Automatic 2 point calibration ? Sample temperature control ? On-line diagnostics FirstFacts Dissolved Oxygen ? ...
W Sater am®www.watersam.com • Housing made entirely of high-grade stainless steel, incl. roof • Vacuum/pressure system for precise sample volumes • No recalibration necessary after cleaning • Metering vessel protected in climate-controlled sample chamber • 8 other sampling systems avail-able, even as double systems • ...
This latest generation of AutoBlock is the most efficient one yet.AutoBlock Plus Specifications:Sample Capacity: 54Sample Cup Size: 50mLNumber of Reagents: 8Footprint: 36"W x 38.5"H x 24"DClearance: 2" all sidesWeight: 250 lbsCrated: 300 lbsElectrical: Available in 120V or 240VTemperature: Ambient to 150°CPower: 120V, 12ACommunication: USBComputer Requirements: • Windows 7 Operating System• ...