solvent-sample Downloads
120 downloads found
Premium
Collection of application notes on performing solvent extraction of environmental ...
ByBUCHI
Premium
The NIRS XDS Transmission OptiProbe Analyzer enables straightforward determination the content of aqueous products, clear liquids, solvents, and viscous samples. The analyzer is suited for use in the technical center as well as for atline applications in the scale-up of production processes. NIRS disposable glass vials are available for viscous ...
Premium
SpeedExtractorenE-916 E-914Number of samples 6 4Extraction cells 10, 20, 40 ml 40, 80, 120 mlCollection bottles 60, 150, 220, 240 mlMixer 2 or 4 solventsResults conveniently and quicklyThanks to high temperatures and pressures, solvent extraction can be undertaken very efficiently in a short time. ...
ByBUCHI
Premium
EXTRACTION PROCEDURE 1. Materials Needed: a. Sample collection bottle, preferably glass. Note: the collection bottle should be large enough to hold the sample and the solvent. b. ...
Premium
Instrument Repeatability +/- 1 ppm +/- 2 ppm +/- 4 ppm Other Solvents are heavier than water and require a seperatory funnel or inverted vial with a septa cap to collect a solvent sample. Solvents are lighter than water and solvent sample can be collected from the top of the container. ...
OPTIFIX SOLVENT is available - for dispensing solvents and viscous media. The glass plunger of the dispenser is ground into the clear glass cylinder to give a precise fit so that liquids with a viscosity of about 100 m / s (e.g. oil) can be dispensed. No metal springs are used in the SOLVENT dispenser. The sample liquid is free ...
It can also be used for the evaporation of solvents in samples being analysed. The simple high efficiency membrane technology allows the separation of nitrogen from the other components of the compressed air ...
ByF-DGSi
Premium
For flasks up to 5 L and 220 °C maximum temperature, the B-305 covers a broader range of applications.Additional interface Control and regulate all process parameters conveniently with the optional Interface I-300 or I-300 Pro.Glass assemblies Seven different glass assemblies enable a wide range of applications, solvents and sample properties.Integrated ...
ByBUCHI
The CETAC U5000AT+ Ultrasonic Nebuliser converts more of the liquid sample into a usable aerosol, with an efficiency of 10 to 15 %. This note will determine the effectiveness of the CETAC AT5000+ using a multi-element method by directly comparing the results to the standard sample introduction of the iCAP (concentric nebuliser and cyclonic spraychamber). ...
Premium
Multivapor™ P-6 / P-12 Efficient evaporation for multiple samples High process integration Save time and minimize risks with a high degree of process integration Speed up your sample evaporation for multiple samples. ...
ByBUCHI
Suitable for ? ltration of aqueous and solvent based samples which makes this type ideal and a good choise for ? ...
This prevents solvent overloading of the ICP, saves laboratory bench space and reduces maintenance. A built-in drain pump removes condensed sample solvent and excess sample liquid from the spray chamber.SIMPLEQuick Setup All U5000AT+ units are shipped with an interface kit for fast and easy connection to the ICP. ...
Premium
The sample preparation takes a few simple steps and the result is obtained in less than 10 minutes. ...
Find the leak and fix it. Change of solvent Use the same solvent for standards and samples. Contaminated column Bake out the column Cut 4 inches off the end of the column Solvent rinse or replace the column See pp. 17, 22III. ...
*In case of OCMA-500Oily water sample (16 mL)Solvent (8 mL)Water sample Solvent with oil components resolvedThe OCMA-500 series extracts the oil components contained in a measurement sample into solvent (S-316) to measure the oil content with an IR ...
(616) 392 - 8001 • (800) 572 - 6653 • Fax: (616) 396 - 7520 • 590 East 32nd Street, Holland, MI 49423 • [email protected] Soluprep II solution preparation system automatically calculates and dispenses the exact amount of solvent required to prepare a precise concentration based on the approximate mass of solute added by the operator.The demand ...
.• Direct analysis of volatile and nonvolatile organic solvents.• Low, spike free background for important elements such as Fe and Ca. • Produces a fine aerosol for high transport efficiency and sensitivity.• Analyze all sample types with a single introduction system.• Directly replace any 6mm nebulizer.• Available with integrated probes to support most ...
Compatible with a wide range of spectroscopy applications and analyzers, HT1200I boasts several primates: it is leader in compactness and first to add support for sealed sample and solvent tubes. It offers short flow-path, a remarkable sample capacity and flexibility. ...
For ICP-MS the U6000AT+ can be used for both volatile organics and aqueous samples. Benefits are very similar to those for ICP-AES but include reduction of solvent-based mass spectroscopic interferences (e.g. ...