valve-testing Downloads
517 downloads found
Premium
The test adapter is the interface between the customer-specific connector at the wire harness and the measurement technology in the test system. The MS300 test adapter is designed with a control unit in a plastic housing, which is assembled into a unit for the respective functions with a circuit board and the associated components such as wires (for solenoid valve, leak test unit, presence, ...
ByKomax AG
Premium
The Cla-Val Model CFF18T-H2 Fuel-Water Separator Control automatically operates the fuel discharge valve and the water drain valve of fuel-water filter separators. It is mounted to a flange on the side of the separator vessel in the sump. The float responds to changes in level of the interface surface of the water and fuel inside the sump area. The pilot valve is a precision-lapped rotary disc, ...
ByCla-Val
API 6D: Pipeline Valves. Pressure Test Specification. ASME B 16.34: Valves-Flanged, Threaded, and Welding End. BS 5351 (substituída por ISO 17292). API 608: Metal ball valves – Flanged, Threaded, and Welding End. ISO 17292: Metal ball valves for petroleum, petrochemical and allied ...
Fuel Oil Heated up to 3500PSI and Features: 690,000 BTU Burner, Heat Rise 7 gpm @ 165°F, Steam Control, High Pressure & Steam Operating Valves, Momentary Test, Flow & Thermostat, Fuel use # 1 or # 2, Assembled in ...
Series 140 Safety Relief Valves are are designed for medium capacity applications where a smaller sized valve is needed. Essential for light and medium capacity situations where a smaller sized valve is required. Designed, tested and built for heavy-duty applications. ...
Our High Quality Instrumentation Grade Accessories Are Designed For Heavy-Duty Process Applications. Blue Ribbon Ball Valves Are designed For Industrial Applications That Require High-Pressure Carbon Steel Or Stainless Steel Shut-Off Valves. Our Valves Are Available Hard Seat (10,000 PSI) Or Soft Seat (6,000 PSI), ¼” Or ½”NPT, Straight Or Angle ...
The KUB V rupture disc protects safety valves against corrosive solids or adhesive media and is installed upstream of the safety valve inlet. It is certified to resist a back pressure of 135 %* of the defined burst pressure and thus enables you to test safety valves in-situ without having to remove the valve for ...
The Wey Knife Gate Valve Model VL is truly a high performance knife gate valve design. This valve provides zero leakage bi-directional shut-off, has mechanically retained seals, has a compact non-rising stem design, and can be repacked in service under full pressure. The chest and seating areas of the valve are self-cleaning. The ...
Pressure relief valves made of gunmetal, with lever and weight, angle-type with threaded connections. This angle-type pressure relief valve with lever and weight is an ideal alternative when in the case of low capacities a TÜV Type Tested safety valve is not necessary. The set pressure can very easily be adjusted by the ...
API 600: Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets. API 602: Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries. ASME B 16.34: Valves-Flanged, Threaded, and Welding End. BS 1414: Steel wedge gate valves (flanged and butt-welding ends) for the ...
Industry standards continue to push toward cleaner processes, and valves have always been notorious for generating particles. Over many years, Particle Measuring Systems (PMS) has been asked to recommend a particle-free valve for specific processes. PMS has not defined a specific valve or manufacturer that meets particle-free operation, but we ...
HEATINGVALVESIT ’S ALL ABOUT YOUSTEAM ANGLE RADIATOR VALVE CAST BRONZE OR BRASSI.P.S.HOT WATER ANGLE VALVES CAST BRONZEI.P.S. ...
BS 1868: Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries. ASME B 16.34: Valves-Flanged, Threaded, and Welding End. B5-5352 (sustituída por ISO 15761). ...
Download Info-InquirySteam MediaValvesElektro-Pneumatical Safety Shut-off Device Type KVRApplicationIn front of a heat exchanger in the district heating power plantMedium: SteamNominal diameter: DN 500Nominal pressure: PN 25Operating pressure: 17 bargOperating temperature: +350 °CSpecial: • Body in welded steel construction• Bypass valve• Control by 3 solenoid ...
Bar stock body, Compact design, Low operating torques, Variety of end connections available, Straight and Angle flow patterns, Every valve is factory tested. ...
Please choose and order the seat material considering the requirements of application.DESIGN STANDARDSValve Design BS EN 593Connection Flanged, acc to EN 1092-2Face to Face DimensionsEN 558-1 Basic Series 13 and 14 (F4)Valve Test EN 12266-1 Marking EN 19PLEASE NOTE: Items written in grey are optional and can be supplied upon request.eko 1200 PN16 DOUBLE FLANGED ...
The hydraulic flange spreader is available as a set(pump, tool, gauge, gauge adapter. couplers, and hose) for your ordering convenience. Suitable for maintenance, overhaul, testing, and valve replacement applications. Integrated wedge design:friction-free, smooth, and parallel wedge movement eliminates flange damage and prevent spreading arm failure. Unique interlocking wedge design: no first ...
AGF revolutionized the industry with the Model 1000 TESTanDRAIN® single handle ball valve inspector's test which eliminated the time and space consuming traditional loop assembly. Since then, TESTanDRAIN® valves have been installed in countless systems throughout the world. AGF continues to introduce innovative new products designed to simplify your installation. TESTanDRAIN® valves ...
GV & GVH Series Ball Tip Gauge Valves feature a lower stem ball head design for back-sealing in the fully open position. Roll-formed stem threads provide enhanced mechanical properties. The gland includes a locking screw, and packing can be externally adjusted. Available with PTFE or graphite packing, supporting temperatures from -65°F to 1,200°F (-54°C to 649°C) and pressures ...