Boiler Return Articles & Analysis
7 news found
For the right sites, high efficiency CHP provides typical energy cost savings of 30-40% compared to grid supplied power and heat from boilers. This can often deliver a return on investment within 2 to 3 years. ...
In the charts below data from the boiler house operator is shown, such as mass flow rate, boiler return and feed fluid temperature, fluid pressure and thermal power. ...
With automatic controls it is possible to maintain slab temperature, supply water temperature, and boiler return water temperature at optimum operating conditions. However, as more automatic features are added to the system controls, there is an increase in initial system cost but generally will result in a lower operating cost. ...
The QuickTOCpurity is especially designed for pure water applications (steam/ condensate return, boiler feed water, cooling water). The analyser is equipped with a closed injection loop where a subset of a water sample is injected into the furnace. ...
Other systems cool down steam that hasn’t been used in steam turbines, for example, condensing vapour into liquid again before re-feeding it into the boiler. When there is little steam to be returned to the condenser, less seawater is required, enabling the speed of the pump to be reduced to a necessary minimum. ...
These boilers require a consistent internal operating pressure for efficient and safe combustion. Boiler pressure fluctuations create combustion problems that can, in extreme conditions, lead to catastrophic failure and structural damage. ...
Ques’ kosher formulas include boiler water treatments, return line treatments, and sludge conditioners. ...