Refine by
Damper Articles & Analysis
104 news found
Chris Anguil, President and Deborah Anguil, Chief Operating Officer of Anguil Environmental Systems Inc. (Anguil), a globally recognized leader in industrial pollution control technologies and services, proudly announce the formation of Anguil Industrial, LLC, to complete the acquisition of Young & Bertke Air Systems Company, a distinguished mechanical contractor in Cincinnati Ohio. The ...
It curbs the need to open the cooler to manually check the water level ever-so-often. Automatic shutoff dampers These are flaps that open when the fan is on, and shut close once the fan turns off. ...
Catalytic Products International (CPI) installed a new 6,000 SCFM Regenerative Thermal Oxidizer (RTO) at a Midwest USA metal can manufacturer for the abatement of Volatile Organic Compounds (VOCs). The 6,000 SCFM TRITON-6.95 Regenerative Thermal Oxidizer (RTO) will control the emissions from two metal lining machines and associated vertical dryers at the can manufacturing facility. The capacity ...
AMMtech has delivered a new project for a Spanish foundry: n. 2 Rectangular Louver Damper for fumes and High temperature up to 1100°C: dimensions 1600 × 2100 and 1600 × 2500 with Seal Air System for 100% ...
The subject of the delivery were eccentric dampers with triple eccentricity series 3E, which belong to the company's TOP products. The dampers were supplied with a special coating of the disc, with extended shafts for connecting the drives. The dampers are controlled by pneumatic actuators equipped with solenoids and limit "switch boxes". ...
Catalytic Products International (CPI) installed a new 6,000 SCFM Regenerative Thermal Oxidizer (RTO) at a West Coast USA specialty wire solutions manufacturer for the abatement of volatile organic compounds (VOCs) during the wire enameling process. As part of a site relocation and expansion, this long time CPI customer chose to replace an existing oxidizer with a new RTO to meet new capacity ...
About 35 states, including the three most populous ones, are seeing a rise in new COVID-19 cases. This resurgence could put a damper on the momentum. As a response to the recent surge, many states and localities are not lifting further restrictions, and some are reinstituting new restrictions such as banning indoor dining. ...
This includes operating the exhaust fans as well as opening the outside air dampers. For buildings without the capacity to treat large quantities of outside air and when outside air conditions are moderate, open all windows for a minimum of two hours before reoccupation. ...
Engineering support included the review of existing equipment and process ducting, dampers and other ancillary equipment. CPI provided complete start-up, commissioning and operator training following installation of the TCS. ...
Rotork’s SI actuators offer a reliable way to carry out analogue control for both quarter-turn and linear valves and dampers. The actuators combine the simplicity of electrical operation with hydraulic precision and the reliability of spring-return or accumulator fail-safe ...
The opening degree of the impeller feeder damper should adjust properly. 4. If abnormal vibrations such as high vibration and high noise of the crusher are found, stop and then inspection immediately. 5. ...
The opening degree of the impeller feeder damper should adjust properly. 4. If abnormal vibrations such as high vibration and high noise of the crusher are found, stop and then inspection immediately. 5. ...
The bottom of the pool is flat, the pond base is strong, the water retention performance is good, and there is no high damper in the surrounding air. After nuisance treatment, it should be properly placed at the appropriate time. ...
It uses an AC motor to control pump and fans in a system without using dampers and valves. A fixed speed motor has to be controlled using dampers and valves but with them a large amount of energy is used, even when there is a no need for consumption of energy in high degree, while VFD can create same operational efficiency specific to the requirement without ...
Variable speed drives help to create variable torque characteristic of the fan and the reduction in input power is in cube law relative to the reduction in speed. While damper controls have been other speed reduction method in fans, that led to the decrease in input power with reduced flow rate but lead to noise generation because of damper changing position that ...
A twin head diaphragm pump has flow pulsations at twice the rotation frequency and at typically half the magnitude of a single headed pump, however, airflow pulsation is an unavoidable consequence of any diaphragm pump. By good damper design, the amplitude of flow pulsations can be minimised, but never fully eliminated. ...
ByCasella
The new kit retains features from the first series including a hydraulic offset with an integrated hydraulic breakaway protecting the tractor from impact damage, a floating top link ensuring the cutting deck hugs the ground contours, and a damper bar to remove any lateral vibration. A shearbolt PTO shaft is standard transmission with options for an overrun and slip clutch PTO. ...
On a wall fan, the MagDoor substitutes conventional shutter or damper systems and ensures completely unrestricted airflow and unsurpassed efficiency. ...
ByDACS A/S
The MagDoor from DACS is a fast operating roller door.Built from aluminium and high grade polymer plastics, the MagDoor with its insulated segments seals tightly even against high static pressures and provides years of trouble free operation.On a wall fan, the MagDoor substitutes conventional shutter or damper systems and ensures completely unrestricted airflow and unsurpassed ...
ByDACS A/S
On a wall fan, the MagDoor substitutes conventional shutter or damper systems and ensures completely unrestricted airflow and unsurpassed efficiency. ...
ByDACS A/S