Distillation Testing Articles & Analysis
40 news found
Poster #103 (3:55 PM): ILSAC GF-6: A New Level of Performance for Engine Oils to Meet Changing Fuel Economy and Emission Standards Poster #104 (10:30 AM): How Oil Companies can use EDXRF Technology to comply with the EPA Tier 3 Standard Requirement of Low Sulfur Fuel and other Key Applications Poster #105 (11:10 AM): Recent Improvements for ASTM D86 Distillation ...
More than 700 surface engineering production departments already trust our tried-and-tested VACUDEST vacuum distillation system. The used rinse water is treated so effectively that it is ideal for reuse in your parts cleaning process. ...
ByH2O GmbH
That’s why over 700 surface engineering production departments trust in our tried-and-tested VACUDEST vacuum distillation system. VACUDEST treats used rinse water so well that it meets the highest environmental standards and is ideal for reuse in your parts cleaning process. ...
ByH2O GmbH
That’s why over 700 surface engineering production departments rely on the tried-and-tested VACUDEST vacuum distillation system. This system treats used rinse water so effectively that it meets the highest environmental standards and is ideal for reuse in your parts cleaning process. ...
ByH2O GmbH
Afterwards, all of the wheel rims are washed with distilled water and prepared for crack testing. Various different jet engines and auxiliary power units (APUs) are refurbished in the Engine Shop. ...
ByH2O GmbH
The grantees are: University of Nevada, Reno – quantifying the range of drinking water contaminants and contaminant classes that can be removed by membrane distillation, and developing and testing a small-scale pilot system that operates using waste heat University of Florida, Gainesville and University of South Florida, Tampa – identifying, ...
University of Nevada, Reno – quantifying the range of drinking water contaminants and contaminant classes that can be removed by membrane distillation, and developing and testing a small-scale pilot system that operates using waste heat University of Florida, Gainesville and University of South Florida, Tampa – identifying, testing, ...
The grantees are: University of Florida, Gainesville and University of South Florida, Tampa – identifying, testing, and evaluating the sustainability of ion exchange processes that can treat entire groups of chemical contaminants. ...
The requirements specified for diesel fuel oils shall be determined in accordance with the following test methods: flash point; cloud point; water and sediment; carbon residue; ash; distillation; viscosity; sulfur; copper corrosion; cetane number; cetane index; aromaticity; lubricity; and conductivity. ...
The basic test method of determining the boiling range of a petroleum product by performing a simple batch distillation has been in use as long as the petroleum industry has existed. It is one of the oldest test methods under the jurisdiction of ASTM Committee D02, dating from the time when it was still referred to as the Engler ...
The absence of a positive indication in the test for acidity of the distillation residue or aqueous extract of a hydrocarbon liquid is an assurance of the care used in refining the fuel or solvent. 1. Scope 1.1 This test method covers the qualitative determination of the acidity of hydrocarbon ...
The distillation (volatility) characteristics of hydrocarbons have an important effect on their safety and performance, especially in the case of fuels and solvents. ...
Consequently, the type of fuel under consideration must first be identified in order to select applicable tests. Test Method D4815 provides a procedure for determining oxygenate concentration in mass percent. Test Method D4815 also includes procedures for calculating mass oxygen content and oxygenate concentration in volume ...
The tar shall conform to the requirements prescribed for (1) water content, (2) specific gravity, (3) specific viscosity, (4) distillate content, (5) softening point of residue from distillation, and (6) total bitumen soluble in carbon disulfide. The properties enumerated shall be determined by the specified ...
Agencies which meet the criteria of Practice D 3740 are generally considered capable of competent testing. Users of this test method are cautioned that compliance with Practice D 3740 does not ensure reliable testing. ...
Specimens shall be sampled, undergo chemical analysis, and conform accordingly to specified values of the following requirements: apparent specific gravity; color (Pt-Co units); distillation (initial boiling point and dry point); nonvolatile matter content; water content; acidity (free acid as ...
The physical and chemical properties of methyl ethyl ketone shall conform to the requirements specified for the following: (1) acidity, (2) weight percentage of alcohol, (3) color (Pt-Co scale), (4) distillation range defined by the initial boiling point and dry point, (5) nonvolatile matter content, (6) purity, ...
This test method provides a method of measurement of distillation range of volatile organic liquids. ...
Obtain results from used oil analysis and component measurements before and after test. The test method may be used for engine oil specification acceptance when all details of the procedure are followed. 1. ...
The design of the engine used in this test method is representative of many, but not all, modern diesel engines. This factor, along with the accelerated operating conditions, shall be considered when extrapolating test results. 1. Scope 1.1 This test method, commonly referred to as the Cummins ISB Test, ...