Interlaboratory Comparison Articles & Analysis
12 news found
The material was characterised through an interlaboratory comparison involving eight expert laboratories. EURM-014k is provided as a set of three single-use mini capsules and a shellOpener, and can be reconstituted in 100 µL, with a minimum sample size required for one measurement of 5 µL. ...
Homogeneity and stability of the materials were carefully assessed and the materials were characterised by a reference method through an interlaboratory comparison. These CRMs can be used by the manufacturers to improve the accuracy of their existing HbA2 tests and help eliminate any disagreement between test results, regardless of the brand of testing kit used. ...
The material was characterised by an interlaboratory comparison of laboratories of demonstrated competence and adhering to ISO/IEC 17025:2017. ...
The materials were certified using an interlaboratory comparison study with 32 participating laboratories from 21 countries and 3 continents. ...
The certified values were determined in an interlaboratory comparison comprising 11 laboratories mainly in the European Union, but also the USA and Australia. ...
The certified values of the fragment sizes were assigned during an interlaboratory comparison using a Lambda DNA size standard with known fragment sizes. ...
Once the measurements have been made, it is essential to document what has been done for the purpose of interlaboratory comparisons, or for future use. A sample form is provided in Fig. 1 to record identifying information applicable to any instrumental method of color or color-difference measurement. ...
Referenced Documents (purchase separately) ASTM Standards C31/C31M Practice for Making and Curing Concrete Test Specimens in the Field C39/C39M Test Method for Compressive Strength of Cylindrical Concrete Specimens C40 Test Method for Organic Impurities in Fine Aggregates for Concrete C117 Test Method for Materials Finer than 75-m (No. 200) Sieve in Mineral Aggregates by Washing C125 Terminology ...
Referenced Documents (purchase separately) ASTM Standards D5 Test Method for Penetration of Bituminous Materials D8 Terminology Relating to Materials for Roads and Pavements D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) D70 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) D92 Test Method for Flash and Fire Points by Cleveland Open ...
Scope 1.1 This practice describes methods for the statistical analysis of laboratory results obtained from interlaboratory proficiency testing programs. As in accordance with Practice E1301, proficiency testing is the use of interlaboratory comparisons for the determination of laboratory testing or measurement ...
Independent confirmation of the outstanding performance of Metrohm’s EtOH-Trode for pH measurement in fuel ethanol: in an evaluation of different combined glass electrodes by means of an interlaboratory comparison, the Metrohm EtOH electrode with ground-joint diaphragm excelled by its outstanding precision. ...
The prime objective of the IRMM is to build confidence in the comparability of measurements by the production and dissemination of internationally accepted quality assurance tools, including validated methods, reference materials, reference measurements, interlaboratory comparisons and training. ...