Refine by
Plastic Pipe System Articles & Analysis
30 news found
The quality of the ecoFITTOM® PVC-O fittings is demonstrated wiht the AENOR Product Certificate N Brand according to the Spanish Standard UNE-CEN/TS 17176-3:2019 (CEN/TS 17176-3:2019) “Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized ...
TOM® PVC-O pipes have been certified according to the standard UNE-EN 17176 “Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1, 2 and 5”, and the ecoFITTOM® PVC-O fittings have ...
Two other elements, non-chemical treatment solutions and the use of plastic pipe, helped reduce the amount of wastewater produced by the cooling systems and eliminate the associated cost and environmental impact of chemical treatment. ...
Pipelife as an active member of The European Plastic Pipes and Fittings Association (TEPPFA) is keen to raise awareness of the value that plastic pipe systems offer for a sustainable future. In order to provide more transparency about the impact of plastic pipe ...
The investment is a natural expansion of the existing Pragma system, which has first been introduced in 1992, and will now allow production of double wall corrugated Polypropylene pipes in a diameter range from 160 to 1,400mm. ...
In response to market needs for an all plastic lug style butterfly valve, GF Piping Systems has introduced the second generation 5-series Lug Style Butterfly Valves. ...
GUTERMANN has signed the supply contract to supply a large system of correlating loggers (1,200 ZONESCAN 820 loggers) for the largest known drive-by leakage monitoring system in Latin America. The tests and investigations have take three years to complete, and the final user and their technology consultants have chosen ZONESCAN among numerouos other products as ...
A proposed new ASTM International standard will be used to cover requirements and test methods for a new type of pipe intended for industrial or oil and gas wastewater transfer. ASTM WK44033, Specification for Fluid Composite Transfer Pipe and Fittings, is being developed by Subcommittee F17.68 on Energy Piping Systems, part of ...
NSF Water Programs.NSF International water services include testing, certification and auditing for municipal water treatment distribution components and chemicals, plastic piping systems, plumbing fixtures and fittings, point-of-use and point-of-entry water systems. ...
This specification covers requirements and test methods for materials, workmanship, dimensions, perforations, pipe stiffness, elongation, joint separation resistance, quality of extruded polyethylene, brittleness, bond, and marking of corrugated polyethylene (PE) pipe and fittings. ...
Included here are criteria for classifying PE plastic tubing materials and PE plastic tubing, and requirements and test methods for materials, workmanship, dimensions, bond strength, carbon black, density,.sustained pressure, hydrostatic burst pressure, and environmental stress cracking. ...
This specification covers polyethylene (PE) pipe made in standard thermoplastic pipe dimension ratios and pressure rated for water. Polyethylene plastics used to make pipe meeting the requirements of this specification are categorized in two criteria: short-term strength tests and long-term strength tests. ...
Included here are criteria for classifying PE plastic tubing materials and PE plastic tubing, and requirements and test methods for materials, workmanship, dimensions, bond strength, carbon black, density,.sustained pressure, hydrostatic burst pressure, and environmental stress cracking. ...
This practice covers general and basic procedures related to the proper installation of thermoplastic, flexible, pressure piping, 36 in. nominal size and smaller, for underground irrigation systems. ...
Disinfecting systems other than chlorine have not been evaluated by this method. 1.2 Guidelines and requirements for test temperatures, test hoop stresses, and other test criteria have been established by prior testing of PE pipe. Other related system components ...
Scope 1.1 This practice covers requirements and test methods for the reconstruction of a sewer service lateral pipe having an inner diameter of 3 to 12 in. and its connection to the main pipe having an inner diameter of 6 to 24 in. without excavation. The lateral pipe is accessed remotely from the main pipe ...
This practice is for use by designers and specifiers, regulatory agencies, owners, and inspection organizations who are involved in the rehabilitation of pipes through the use of a resin-impregnated tube installed within a damaged existing pipe. ...
This specification defines requirements for the data used in the tracking and traceability base-62 encoding system. It provides the format of the resultant code to characterize various components used in fuel ...
This specification does not cover threaded pipe. The plastic used to make the pipes and fittings shall be virgin plastic or reworked plastic having Plastics Pipe Institute (PPI) long-term hydrostatic design stress and ...
Scope 1.1 This specification covers materials, structural design, physical dimensions and manufacturing requirements for monolithic or sectional corrugated high density polyethylene (HDPE) water quality units with volumes greater than or equal to 140 ft3 or 1,050 gal (4,000 L). 1.2 The corrugated HDPE water quality units are ...