Sludge Sensor Articles & Analysis
10 news found
They provide cutting-edge technology sludge measurement meters such as the Clamp-On Ultrasonic Sludge Density Meter (ENV200-C), the Ultrasonic Sludge Blanket Level Meter (ENV120). Clamp-On Ultrasonic Sludge Density Meter (ENV200-C) The ENV200-C Clamp-on ultrasonic sludge density meter guarantees fit-and-forget ...
Hydroman™ Submersible Sewage Sludge Pumps is desined for handling thick sludges,large amounts of mud and sewage transport mixed with up to 70% solids, the Submersible Sewage Sludge Pump with temperature sensor, embedded in the electric motor, and Moisture sensor, in the oil chamber, are available options to ...
Anaerobic digestion is an essential process in wastewater sludge treatment. Hydrolysis is one of the rate-limiting reactions in anaerobic digestion but it can be greatly accelerated by increasing the operating temperature to 50°C or higher. ...
This is where Partech’s products come in, by using our sludge blanket interface sensors, an alarm can be raised when the sludge hopper is full or the settlement process is failing. We offer a selection of sensors that are for use in conjunction with our range of sludge blanket monitoring instruments, all ...
Learn how the new version of the mobile road sensor differs from the previous one and what it is used for. Find out why e.g. landfills and sludge drying plants need our weather sensors: Many may not realize why operators of landfills, waste water and sewage treatment systems as well as other treatment plants must strictly observe winds, ...
You don’t need any extra carry bags with this clever water instrument as it has a cable reel design making it compact and easy to carry around. The 715 detects sludge blankets by winding the sensor down into the tank. Once the sensor reaches the blanket, the audible tone will change and the LED will illuminate – it couldn’t be ...
You’re then left with the problem and expense of trying to dry it out. So what do the Partech sensors do? The Partech sludge sensors can tell you when the level of sludge has decreased to a low level within the tank. The 8200 sensor is also simple but has a two-point switch system. Additionally, ...
We like to match our clients with the best products, so for instance unique products like the SludgeWatch715 Sludge Blanket Detector and the TurbiTech Sensors are really easy to promote once we’ve identified a client’s needs. ...
The right measurement at the right location – without cables, easy installed 1 Master, several Slaves – save costs with every additional measuring point Compatible for IQ Sensor Net System 182 and System 2020 With the wireless communication within the IQ Sensor Net you avoid to run long cables and enable the ideal measuring location for your ...
We were advised by Partech that by having the upper sensor set to a more sensitive level (0-200mg/l) we would be able to pick up the presence of rising sludge and activate an alarm condition and automatically open the de-sludging valve. ...