The HydraGO and HydraGO FLEX represent the most advanced portable soil sensor system. Simply insert the probe into the soil, and tap on the “Sample” button in the HydraGO app. The HydraGO and HydraGO FLEX communicate wirelessly with your smartphone or tablet using Bluetooth. Both systems features a rugged, Delran housing that contains a rechargeable battery. The internal battery will ...

CONTACT SUPPLIER

Showcase

Weda - Model YT-600 - Remote-Operated Sludge Removal Robot

Manufactured by:Weda Robotics based inSödertälje, SWEDEN

YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...

CONTACT SUPPLIER

Showcase

Microbe-Lift SA-AG - Model Sludge Away - Sludge Removal

Manufactured by:Ecological Laboratories, Inc. (ELI) based inIsland Park, NEW YORK (USA)

Specially formulated for manure pits over slatted floors, outdoor manure lagoons and vertical holding tanks. MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom or surface solids that are slow to degrade. Provides rapid, natural sludge and muck removal and works 80% faster than competitive products. Binds phosphate and helps with the liquification and nutrient ...

CONTACT SUPPLIER

Showcase

Stevens - Model TB3 - Tipping Bucket Rain Gauge

Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)

The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...

CONTACT SUPPLIER

Showcase

Cla-Val - Model 90-01 & 690-01 - Pressure Reducing Valve

Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)

Cla-Val Models 90-01 and 690-01 Pressure Reducing Valves automatically reduce higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. Each valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, ...

CONTACT SUPPLIER

Showcase

Myron L - Model Ultrapen PT1 - Conductivity/TDS/Salinity & Temperature Pen

Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)

This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...

CONTACT SUPPLIER

Showcase

BioMicrobics - Model MicroFAST - Fixed Activated Sludge Treatment (FAST)

Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)

The MicroFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. A treatment tank containing the MicroFAST module receives wastewater from the facility and is typically placed after a primary settling tank or septic tank. The MicroFAST module contains blocks of fixed media and a patented ...

CONTACT SUPPLIER

Showcase

FlotLife - Model FDS-M-170.0 - Mobile Sludge Dewatering Units

Manufactured by:FlotLife based inJaunmarupe, LATVIA

Maximize efficiency and minimize your footprint with the FlotLife Mobile Sludge Dewatering Unit, Model FDS-M-170.0. Engineered for the demands of modern wastewater treatment, this compact unit delivers powerful, reliable dewatering performance right where you need it. This compact Mobile Sludge Dewatering Unit is designed for use with a category B driver's license. Ideal solution for conducting ...

CONTACT SUPPLIER

Showcase

Katalase K 400L - Model AK 400L - High-Activity Catalase Enzyme for Hydrogen Peroxide Removal in Wastewater Treatment

Manufactured by:HLB Genex based inDaejeon, SOUTH KOREA

Katalase AK 400L is a high-activity liquid catalase enzyme designed for the efficient decomposition of hydrogen peroxide (H₂O₂) in industrial processes. The enzyme rapidly converts hydrogen peroxide into water and oxygen, providing a safe and environmentally friendly solution for peroxide removal. It is widely used in wastewater treatment, semiconductor manufacturing, textile processing, and ...

CONTACT SUPPLIER

Showcase

B&W Tek - Model Discover It Yourself Kits - Fully Customizable

Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)

Metrohm’s DIY Raman kits give you control with modular, easy-to-integrate components so you can build the system you need without extra cost or complexity. Get up and running quickly, adapt as your needs change, and access powerful Raman capabilities in a flexible, scalable setup that fits the way you work. Our DIY spectroscopy kits consists of three basic components: 1. Laser 2. Detector ...

CONTACT SUPPLIER

Showcase

InduMar - Model StopCorr - Polymeric Products

Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)

The StopCorr line of polymeric products has been developed to provide an easily installed and cost effective path to arresting surface corrosion and eliminating environmental ...

CONTACT SUPPLIER

Showcase

IOC - Model Simple HRF-5 - Hi-Flow Radial Filter

Manufactured by:Industrial Odor Control (IOC) based inMcGrady, NORTH CAROLINA (USA)

Hi-Flow Radial Filter HRF-5 - Holds 5 Cubic Feet of Media. The Hi-Flow Radial Filter (HRF-5) is an activated carbon radial molecular air scrubber. It captures VOCs and particulate matter in a broad range of environments. It has a small footprint with a diameter of just 22.5". It can handle up to 1,000 CFM (when recirculating). The HRF is made of 16-gauge steel and is available in stainless steel. ...

CONTACT SUPPLIER

Showcase

MCI - Model MC 1300 (AMA 35DP Biocide) - Odorless Water-based Suspensions

Manufactured by:Meitler Consulting, Inc. (MCI) based inTonganoxie, KANSAS (USA)

AMA 35DP is a nearly odorless, dustless, free- flowing crystalline solid. Active Ingredients: Tetrahydro-3,5-dimethyl-2H-1,3,5,-thiadiazine- 2-thione 98%. Inert Ingredients: 2% Total ...

CONTACT SUPPLIER

Showcase

Mass Flow Online - Model MS-105 50 ln/min - Thermal Mass Flow Meter

Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS

MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...

CONTACT SUPPLIER

Showcase

Crisafulli Basics - Hydraulic Dredges

Manufactured by:SRS Crisafulli, Inc. based inGlendive, MONTANA (USA)

Dredging removes sediment and sludge in liquid environments, usually water. The three main types of dredges are clam shell, cutter-suction, and horizontal auger. Clam shell or bucket dredges can be small excavators, or large cranes on a barge. Cutter-suction dredges are typically large ocean going vessels, that anchor themselves with a pillar and dredge in an arch before moving to the next ...

CONTACT SUPPLIER

Showcase

MPE - Model IBEX 650FT - Robotic Pipe Inspection Crawler

Manufactured by:MPEsupplies.com by MPE based inSpringdale, ARKANSAS (USA)

50 mm/1.96" in camera head, 700TVL resolution. Pan and tilt view head. 6-wheel crawler body for 100mm to 600mm. Crawler bodyfor 100mm to 600mm pipes. 12.1" inch display controller (256GB hard disk). Remote control box. 120m/4.72" in cable reel with counter. Includes Keyboard and mouse. 110/220V power supply. 48V battery optional. Cable guide appropriate for manhole and underground control. Hook ...

CONTACT SUPPLIER

Showcase

ESCO - Model EC-OZ/SS & EC- ST/SS Series - Skid Mounted Ozone Generator Systems

Manufactured by:ESCO International (EI) based inGlan Conwy, UNITED KINGDOM

The skid mounted ozone generator systems are specifically designed and manufactured to meet the disinfection and sanitization requirements for controlled water quality standards for various industries, such as: bottling and rinsing plants, food and beverage industries, pharmaceutical and chemical processes, ultra pure water in electronic and pharmaceutical sectors, swimming pools and hot water ...

CONTACT SUPPLIER

Showcase

Dosch - Model Type 778 - Flow Monitor System

Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY

These devices are suitable for use cases involving shocks at the installation location, in contaminated media, and for mobile operation in any location. The use of a pitot tube enables even lower flows to be monitored. The flexible bellows seal prevents the function from being affected by metal chips, which are to be anticipated during lubricating oil checks on gear ...

CONTACT SUPPLIER

Showcase

C&G - Model V-NT Series - Vacuum Evaporators

Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY

High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...

CONTACT SUPPLIER

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you