Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...

CONTACT SUPPLIER

Showcase

Rotomite - Model SD-110 - Self-Propelled Diesel Dredges

Manufactured by:SRS Crisafulli, Inc. based inGlendive, MONTANA (USA)

The SD-110 is Crisafulli's lightest self propelled dredge. The hydraulic thruster allows the SD-110 to dredge irregular shaped ponds, and maneuver into boat slips, and other tight ...

CONTACT SUPPLIER

Showcase

BioMicrobics - Anoxic BioFilter Clarifiers (ABC)

Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)

ABC (Anoxic BioFilter Clarifiers) is a family of specialty clarifiers. Each of these devices are designed for use as a secondary clarification device after ...

CONTACT SUPPLIER

Showcase

Quantek - Model 906 - CO2 Analyzer for Process & Research

Manufactured by:Quantek Instruments, Inc. based inGrafton, MASSACHUSETTS (USA)

The Quantek Model 906 Benchtop CO2 Analyzer is designed for continuous or spot measurement and analysis of carbon dioxide levels. Analysis ranges of 0-5,000ppm, 0-10,000ppm, 0-25,000ppm, 0-20%, or 0-100% vol/vol. Simply introduce your sample gas flow into the inlet of the Model 906 CO2 analyzer, and see results on the LCD within 15-20 seconds. The inlet accepts a flow rate of 5cc/min to 1000 ...

CONTACT SUPPLIER

Showcase

B&W Tek - Model Discover It Yourself Kits - Fully Customizable

Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)

Metrohm’s DIY Raman kits give you control with modular, easy-to-integrate components so you can build the system you need without extra cost or complexity. Get up and running quickly, adapt as your needs change, and access powerful Raman capabilities in a flexible, scalable setup that fits the way you work. Our DIY spectroscopy kits consists of three basic components: 1. Laser 2. Detector ...

CONTACT SUPPLIER

Showcase

Ecological - Model BGE M - Biological Methane Booster

Manufactured by:Ecological Laboratories, Inc. (ELI) based inIsland Park, NEW YORK (USA)

BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

CONTACT SUPPLIER

Showcase

Lone Star - Model LS100 - Water Well Drill

Manufactured by:Lone Star Drills. a Little Beaver Company based inLivingston, TEXAS (USA)

The LS100 is the original small, DIY water well drill rig. It’s economically priced and designed specifically for water well drilling in developing nations. The LS100 efficiently drills a 6-inch borehole to 100 feet in sandy and clay soils. Its heavy-duty welded steel frame and robust 3,500-pound winch stand up to demanding drilling applications and the convenient swivel design allows the ...

CONTACT SUPPLIER

Showcase

Schleuniger - Model E400 - Semi-Automated Cut and Strip Machine

Manufactured by:Komax AG based inDierikon, SWITZERLAND

The Cut & Strip Family E400 processes wire, tubing, ribbon, and multiconductor cables from 0.8 – 12.5 mm (0.032 – 0.49") with cross-sections from 0.14 – 16 mm² (26 – 6 AWG). Standard applications of the Cut & Strip machine series E400 include stripping the outer jacket in several steps, as well as full and partial strips on either or both sides. It processes ...

CONTACT SUPPLIER

Showcase

SnowPure - Model Zapwater Zap-10 and Zap-20 - Small Electrodeionization Module for Laboratory Water

Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)

Zapwater EDI modules are specifically designed for small laboratory water systems, including countertop and wall-mounted units. When paired with reverse osmosis (RO), Zapwater RO-EDI systems can produce ASTM Type I & II or JIS A2–A4 laboratory water. With optimized RO and pretreatment, they consistently deliver 17 MΩ·cm water ...

CONTACT SUPPLIER

Showcase

Zetian - Model CODet-5000 - COD Water Quality Online Analyzer

Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA

CODet-5000 is a new self-developed automatic online analyzer for measuring chemical oxygen demand (COD). Based on our patented Permeance Measurement Technology Platform, combined with Constant Temperature Fiber Technology and Digestion Colorimetric Integration Technology, it can achieve high precision, low detection limit, high stability and low maintenance of automatic COD online monitoring. The ...

CONTACT SUPPLIER

Showcase

Apex - Floodguard Slot-in Barrier

Manufactured by:Apex Flood Solutions based inWatford, UNITED KINGDOM

A well established concept is a ‘stoplog’ whereby the horizontal beams are slotted into vertical U-channels on either side. What makes Floodguard Slot-in Barrier special is the great range of width and heights which can be protected, and the incredible ease of use even compared with other stoplogs. Floodguard Slot-in Barrier includes unique patented features such as an additional ...

CONTACT SUPPLIER

Showcase

FlotLife - Model FDS-M-170.0 - Mobile Sludge Dewatering Units

Manufactured by:FlotLife based inJaunmarupe, LATVIA

Maximize efficiency and minimize your footprint with the FlotLife Mobile Sludge Dewatering Unit, Model FDS-M-170.0. Engineered for the demands of modern wastewater treatment, this compact unit delivers powerful, reliable dewatering performance right where you need it. This compact Mobile Sludge Dewatering Unit is designed for use with a category B driver's license. Ideal solution for conducting ...

CONTACT SUPPLIER

Showcase

Evident - Model Vanta - Handheld XRF Analyzer

Manufactured by:Evident Inspection Technologies, part of Evident Scientific based inWaltham, MASSACHUSETTS (USA)

Instantly identify materials and their chemical composition from any location using the Vanta® handheld XRF analyzer. The Vanta series delivers fast, accurate elemental analysis and material identification using smart and cloud-connected ...

CONTACT SUPPLIER

Showcase

FlowCam Cyano - Water Quality Analyzer for Cyanobacteria Identification

Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)

FlowCam Cyano provides an innovative solution for freshwater research and monitoring of drinking water reservoirs and recreational water bodies. A high-throughput, automated alternative to manual microscopy, FlowCam Cyano automatically differentiates between fluorescence-emitting Cyanobacteria and other algae while enabling the early detection of harmful algal ...

CONTACT SUPPLIER

Showcase

Hengst Filtration - Filter Mats for Gas Turbines and Turbomachinery

Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK

Effective protection for maximum performance. Our Filter mats are ideal for use in coalescence filters for gas turbines and turbomachinery. They remove solid and liquid particles from the gas flow and ensure that the gas is clean, dry and free of liquids. Especially in environments with high humidity, coalescence filters are indispensable for protecting gas turbines, engines and compressors from ...

CONTACT SUPPLIER

Showcase

Anguil LoCarb - Alternative Fuel Oxidizers

Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)

Anguil has decades of experience supplying alternative heating methods for oxidizer technologies. While the electrically heated Catalytic Recuperative Oxidizer (CATOX) is well established and widely applied, the industry has been slower to integrate lower carbon components like electric heating elements and hydrogen-fueled burners into the Regenerative Thermal Oxidizer (RTO), Direct Fired Thermal ...

CONTACT SUPPLIER

Showcase

BioMicrobics - Model MicroFAST - Fixed Activated Sludge Treatment (FAST)

Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)

The MicroFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. A treatment tank containing the MicroFAST module receives wastewater from the facility and is typically placed after a primary settling tank or septic tank. The MicroFAST module contains blocks of fixed media and a patented ...

CONTACT SUPPLIER

Showcase

Stevens - Model TB3 - Tipping Bucket Rain Gauge

Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)

The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...

CONTACT SUPPLIER

Showcase

C&G - Model V-NT Series - Vacuum Evaporators

Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY

High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...

CONTACT SUPPLIER

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you