- Home
- Equipment
Refine by
Nc Xprt Equipment & Supplies
27 equipment items found
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
The 3800 is designed to meet the requirements of the large farmer and medium sized contractor who may have a 110 HP + tractor available for mixing/agitating tank. It has a flow capacity of 3800 gallons per minute (17,000 litres per ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
The 4800 is designed for large scale contractors who would have a 160 HP tractor available for the task of mixing slurry with a flow capacity of up to 4800 gallons per minute (21,600 litres per ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
The Lagoon Pump is designed to operate in very deep pits. With power requirements of 155hp + this pump is ideal for large farmer and contractors ...
Manufactured by:Penta Machine Co., LLC based inBelgrade, MONTANA (USA)
Pocket NC 5 Axis Desktop CNC Mill V2-50 can cut materials up to a hardness of G5 titanium although optimally cuts delrin, aluminum or softer steels. The V2-50 has a 50,000 RPM spindle which requires an air supply.* Travel is 5.0 inches/128.3 mm (Y), 4.55 inches/115.5mm (X) and 3.55 inches/90.1mm (Z). The machine accepts standard G code. There is the option to choose the V2-50CHB with an NRR-2651 ...
Manufactured by:Penta Machine Co., LLC based inBelgrade, MONTANA (USA)
This pack includes 10 tools, 5 1/8" tools and 5 1/16" ...
Distributed by:MST Group based inDevon, UNITED KINGDOM
NC offer the complete range Slurry Mixing equipment. NC have been manufacturing slurry handling equipment from the mid seventies and we have models to fit above ground stores and open ...
Manufactured by:SPX Cooling Technologies, Inc. - a division of SPX Corporation based inOverland Park, KANSAS (USA)
When SPX Cooling Technologies engineers began their quest to design a new counterflow cooling tower, they were challenged to reach new heights in cooling performance. Also required was a tower design that would simplify and speed factory fabrication, delivery and field assembly. The MD Everest Cooling Tower is uniquely suited for applications with higher cooling demands, including data centers, ...
Manufactured by:Relisys Medical Devices Limited based inRanga Reddy, INDIA
Highlighting Features: • High pressure capability and controlled expansion • Minimal growth and robust rated burst pressure • Combines advanced precision • Ensures optimum reliability and deliverability • Precise expansion ...
Manufactured by:NC Technologies Srl based inMilano(MI), ITALY
Fully automated analysis system. High sensitivity, accuracy and precision. Flexibility and versatility of applications. Detector does not require reference gas. Powerful software for viewing results from a computer. Touch-screen display for an easy settings management. Consumables status monitoring for an optimization of catalysts usage. Three types of samplers available: electronic / pneumatic / ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
The 3000 SU has the same great performance as the Super 3000 but is available as a 3 point linkage machine with a hydraulic top ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
Powerful, Compact, 4 Wheel Drive, Hydrostatic Dumper; Power is provided by the reliable Kubota D series engine. Automotive DA controlled pump provides safe and smooth control at all times. Twin-Lock wheel motors provides power to each wheel via its own dual hydraulic motor . As one wheel starts to lose traction, the power is distributed to the other wheels to compensate thus giving Intelligent 4 ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
Powerful, Compact, 4 Wheel Drive, Hydrostatic Dumper; Power is provided by the reliable Kubota D series engine. Automotive DA controlled pump provides safe and smooth control at all times. Twin-Lock wheel motors provides power to each wheel via its own dual hydraulic motor . As one wheel starts to lose traction, the power is distributed to the other wheels to compensate thus giving Intelligent 4 ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
Tandem Centre Axle Trailer On Air Or Mechanical ...
Distributed by:TRP Limited based inLincolnshire, UNITED KINGDOM
The Super 3000 model range is designed for mid size tractors ranging typically from 80 – 120hp providing flow rates of up to 3000 gallons per minute (13,500 litres per ...
Manufactured by:SPX Cooling Technologies, Inc. - a division of SPX Corporation based inOverland Park, KANSAS (USA)
SPX Cooling Technologies embarked on a mission to design and build a cooling tower like no other in the world. Like adventurers climbing Mt. Everest, we knew the challenges yet were driven to achieve something remarkable. We forged a path to the summit that takes cooling to a higher level. The result, the NC Everest, provides epic customer advantages, with up to 50% greater cooling capacity, ...
Manufactured by:SPX Cooling Technologies, Inc. - a division of SPX Corporation based inOverland Park, KANSAS (USA)
Low Operating Costs: Marley high-efficiency heat transfer media, fans, gravity-flow water distribution and efficient mechanical drive systems work together to offer maximum cooling with minimum power use. Extensive NC model configurations offer selection flexibility and value when evaluating first cost and life cycle cost options. Quiet By Design: All Marley NC Cooling Towers are designed for low ...
Manufactured by:NC Engineering (Hamiltonsbawn) Ltd. based inCo. Armagh, UNITED KINGDOM
The Super 3000 model range is designed for mid size tractors ranging typically from 80 – 120hp providing flow rates of up to 3000 gallons per minute (13,500 litres per ...
Manufactured by:Penta Machine Co., LLC based inBelgrade, MONTANA (USA)
Pocket NC 5 Axis Desktop CNC Mill V2-10 can cut materials up to a hardness of G5 titanium although optimally cuts delrin, aluminum or softer steels. Travel is 5.0 inches/128.3 mm (Y), 4.55 inches/115.5mm (X) and 3.55 inches/90.1mm (Z). The machine accepts standard G ...
Manufactured by:Penta Machine Co., LLC based inBelgrade, MONTANA (USA)
D1 = 4.0 mm, D2 = 4.0 mm, L1 = 40.0mm, L2 = 10.0 mm; Able to cut aluminum, wood, plastic, copper, brass and ...
Manufactured by:Penta Machine Co., LLC based inBelgrade, MONTANA (USA)
D1 = 3.0 mm, D2 = 3.0 mm, L1 = 40.0mm, L2 = 10.0 mm; Able to cut aluminum, wood, plastic, copper, brass and ...