- Home
- Equipment
Refine by
Raci Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Raci Srl based inMilano, ITALY
MOD. 9100| PN 10/16 | DN 50-300| - Flange for PE/PVC pipes, fully restraint. Body and compression ring high quality epoxy powder coated (fusion bonded), coating thickness DFt min. 250 microns, zero porosity (tested with 3000v), high impact resistance and cross-linkage according to DIN 30677-2 and DIN 3476. Perfect tightness by back seal hydraulically operating and independent from mechanical ...
Manufactured by:Raci Srl based inMilano, ITALY
Manufactured according to the requirements of EN 1074 and EN 1171 (min. torque strength Class2). Certified and marked by third part body as production supervisor. Body and bonnet high quality EPOXY powder coated (fusion bonded), coating thickness DFT min. 250 micron, zero porosity (tested with 3000V), high impact resistance and cross-linkage according to DIN 30677-2 and DIN ...
Manufactured by:Raci Srl based inMilano, ITALY
Non return valve with shutter ogive and contrast spring designed to take the advantages of Venturi effect. Low head losses and noiseless thanks to inner profile. From DN 40 to DN 250 PN 10-16-25 single block body version, from DN 250 and for big working pressure PN 40 and PN 64 reinforced version with body composed by two parts assembled by steel fasteners. Body high quality EPOXY powder ...
Manufactured by:Raci Srl based inMilano, ITALY
Double eccentric type. Bidirectional sealing. Design according to the requirements of EN 1074. Face-to-face dimensions according to EN 558-1 Series 14 (former DIN 3202-F4). Body, disc, retainer ring and gear box high quality epoxy powder coated (fusion bonded) minimum thickness 250 microns. Sealing seat from CrNi hardened stainless steel, welded to the body and machined (or mechanical fixed, ...
Manufactured by:Raci Srl based inMilano, ITALY
According to the requirements of EN 14384 type A and EN 1074-6. Generously oversized column for high water capacity. Plug fully rubber vulcanised with special O-ring profile for lateral soft sealing without high compression of any rubber. Hydrant head, column and base high quality epoxy powder coated (fusion bonded), UV resistant. Multiple O-ring spindle sealing system embedded in non-corrosive ...
Manufactured by:Raci Srl based inMilano, ITALY
MOD. 10085| PN 10-16 | DN 15-300| - Fast repair clamp single bolt. Fast repair clamp for permanent sealing of small damages and leakage in pressure pipelines adducting water, gas and others fluids. Suitable for pipes made form different materials (steel, cast iron, plastic, ...
Manufactured by:Raci Srl based inMilano, ITALY
Ductile iron gate valves resilient seated non rising stem, short body. Ductile iron gate valves resilient seated non rising stem, long body Flange drilling and face-to-face dimensions according to eN 1092-2 and eN 558 (series 14 and series 15). Primary sealing obtained by compression of rubber wedge. Secondary sealing obtained by OR gaskets embedded in non-corrosive material. Internal and ...
Manufactured by:Raci Srl based inMilano, ITALY
Single orifice type, fully automatic single function for releasing air under pressure. Performance according to the requirements of EN 1074. Body and cover high quality polyamide (Rilsan – PA11) powder coated (fusion bonded), coating thickness DFT min. 250 micron, zero porosity (tested with 3000V), high impact resistance and cross-linkage according to DIN 30677-2 and DIN 3476. Float from ...
Manufactured by:Raci Srl based inMilano, ITALY
Manufactured according to the requirements of EN 1074. body and bonnet high quality powder coated (fusion bonded), coating thickness DFT min. 250 micron, zero porosity (tested with 3000V), high impact resistance and cross-linkage according to DIN 30677-2 and DIN 3476. Multiple O-Ring spindle sealing system embedded in non-corrosive material to DIN 3547-1. Additional back sealing disc for O-Rings ...
Manufactured by:Raci Srl based inMilano, ITALY
Universal type for use on cast iron, ductile iron, steel and AC pipes. One body for various dimensions of pipes. Body high quality epoxy powder coated (fusion bonded), coating thickness DFT min. 250 microns, zero porosity (tested with 3000V), high impact resistance and cross-linkage according to DIN 30677-2 and DIN 3476. Multiple O-ring-profi le gasket for a reliable sealing (will be supplied ...