- Home
- Equipment
Refine by
Sfe Xprt Equipment & Supplies
5 equipment items found
Manufactured by:Stainless Foundry & Engineering, Inc. based inMilwaukee, WISCONSIN (USA)
An impeller is the key rotating component of a centrifugal pump that accelerates the media being pumped (usually liquid or mixed media with solid content) outward from the center of rotation, transferring energy from the motor that drives the pump to the fluid being pumped. Semi-Open/Semi-Closed Pump Impellers have a back wall that adds mechanical strength to the vanes, while remaining open on ...
Manufactured by:Stainless Foundry & Engineering, Inc. based inMilwaukee, WISCONSIN (USA)
Multi-Stage Pumps have two or more impellers rotating around the shaft at one time. This essentially allows the multiple impellers to act like separate pumps. This means as the flow progresses from one stage to the next, the first impeller increases by the same amount as the last impeller, resulting in a multi-stage pump design with more pressure capabilities than a single impeller is able to do ...
Manufactured by:Stainless Foundry & Engineering, Inc. based inMilwaukee, WISCONSIN (USA)
Double Suction Casings or Volutes allow liquids to enter the center of blades from both sides simultaneously. The double suction design eliminates the axial forces on the impeller, which allows for higher flow than a single suction impeller. Double Suction Casing are less vulnerable to wear and tear caused by axial thrust, which occurs when water enters the impeller. Since liquid enters both ...
Manufactured by:Stainless Foundry & Engineering, Inc. based inMilwaukee, WISCONSIN (USA)
Open Impellers have vanes that are open on both sides without any protective shrouds that are attached to a center hub and are directly mounted to a shaft. There is no wall surrounding the vanes, which makes them faster and easier to clean or repair. Open Impellers tend to be used in smaller pumps, handling liquids, abrasive liquids, or suspended solids. Due to their structure, open impellers ...
Manufactured by:Stainless Foundry & Engineering, Inc. based inMilwaukee, WISCONSIN (USA)
An impeller is the key rotating component of a centrifugal pump that accelerates the media being pumped (usually liquid or mixed media with solid content) outward from the center of rotation, transferring energy from the motor that drives the pump to the fluid being pumped. Closed Impellers have a back and front wall around the vanes, giving them maximum structural strength and optimal efficiency ...