- Home
- Equipment
Refine by
Schultz Xprt Equipment & Supplies
6 equipment items found
Distributed by:Schultz’s Inter-State Ag, Inc. based inMonroe, WISCONSIN (USA)
From bins and dryers to handling equipment, Schultz’s Inter-State Ag, Inc. offers a broad line of grain handling and storage systems that ...
Manufactured by:Schultz Process Services, Inc. based inCypress, TEXAS (USA)
We utilize a double pocket vane for our vane separators and scrubbers. Vane Separators are designed to remove liquid particles from a vapor stream with high efficiency and low pressure drop. The liquid particles are captured and removed through rapid changes in direction through the vane flow profile. The liquid drops are too large and dense to make the quick zig-zag flow pattern and impact the ...
Manufactured by:Schultz Process Services, Inc. based inCypress, TEXAS (USA)
When space is limited and size constraints are design considerations, we may recommend a u-tube exchanger. This design is very similar to the shell and tube, but essentially reduces the overall length of the unit in half, by bending the shell & tube 180 degrees for increased surface area. These are a more intricate design and do require specialty flanges for the bonnets, but can provide ...
Manufactured by:Schultz Process Services, Inc. based inCypress, TEXAS (USA)
Centrifugal Separators have been used across the industry dating back to 1950s. They are a dependable solution, especially if you aren’t sure what is coming down the pipeline. We have developed multiple devices for these applications and have experienced continued success in difficult applications over our company’s history, including multi-cyclones and mono-cyclones. Multi-cyclones ...
Manufactured by:Schultz Process Services, Inc. based inCypress, TEXAS (USA)
Filter Separators are one of the more common equipment configurations found in the industry today. These are utilized when higher efficiency for separating smaller particles are required. They are commonly used on suction stages for compressors and fuel gas applications, where clean gas is necessary. The typical configuration of this equipment incorporates filter cartridges in the inlet chamber ...
Manufactured by:Schultz Process Services, Inc. based inCypress, TEXAS (USA)
One of the more common forms of heat exchangers is a shell and tube exchanger. This is a straight-forward and cost effective approach for heat transfer solutions. In this design, one fluid is passed through tubes (i.e. tube side) while another fluid enters the shell section (i.e. shell side) of the vessel housing the tubes. As the phases pass through the exchanger, the surface area of the tubes ...