- Home
- Equipment
Refine by
Vibrotechnik Xprt Equipment & Supplies
56 equipment items found
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Test sieves correspond to the accuracy of mesh sizes and perforated plate holes to international standards ISO 3310-1, ISO 3310-2 and provide high reproducibility of sieving. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Test sieves correspond to the accuracy of mesh sizes and perforated plate holes to international standards ISO 3310-1, ISO 3310-2 and provide high reproducibility of sieving. The sieves can be equipped with stainless steel mesh (cell sizes from 20 μm to 10 mm), or with perforated plate with round and square holes (from 1 mm to 125 mm), corresponding to ISO 3310. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Test sieves correspond to the accuracy of mesh sizes and perforated plate holes to international standards ISO 3310-1, ISO 3310-2 and provide high reproducibility of sieving. The sieves can be equipped with stainless steel mesh (cell sizes from 20 μm to 10 mm), or with perforated plate with round and square holes (from 1 mm to 125 mm), corresponding to ISO 3310. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Test sieves correspond to the accuracy of mesh sizes and perforated plate holes to international standards ISO 3310-1, ISO 3310-2 and provide high reproducibility of sieving. The sieves can be equipped with stainless steel mesh (cell sizes from 20 μm to 10 mm), or with perforated plate with round and square holes (from 1 mm to 125 mm), corresponding to ISO 3310. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
The Jaw crushers are designed to crush brittle bulk materials of various strength and hardness. In the Jaw crushers, the material particles are broken down by the compressive and shear strains between the fixed and moving jaws. The grain size of the crushed material is determined by the gap between the jaws in the lower part (the discharge slot) and the physical properties of the material. ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Vibrating grinders are designed to comminute samples to a finely dispersed state in intermittent operation. In a vibrating grinder, comminution occurs by means of abrasion – simultaneous compressive and shear strain of material particles between the crushing bodies and the cup walls. The grain size of the ground material depends on the grinder operating time, the initial grain size and ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. Sample splitters DP 5, DP 10, DP 15 and DP 20 differ in the riffle width, sample receiver volume, and maximum particle size of the material to be divided. ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
The Cyclone dust collector is designed to create an air flow that captures the duct fraction of the material crushed and settles it in a cyclone and bag filter. The primary components of the product are a fan, cyclone with shutter, frame and bag filter. The support structure has wheels equipped with brakes for moving the dust collector. The dust collector has an adjustable exhaust hood for use ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Vibrating grinders are designed to comminute samples to a finely dispersed state in intermittent operation. Vibrating grinder VGE is designed for grinding samples from 250 to 750 ml with high productivity. The main purpose of VGE is the grinding of samples to an analytical size of less than 74 micrometers in the mining and metallurgical laboratories. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
The CM 120 cutting mill is laboratory-class equipment designed for comminuting small batches of material with grain size up to 20 mm. The CM 120 effectively comminutes fiber materials by crushing them with a plunger through a vertical shaft. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
The «Turbula» SM 2.0 shaker mixer is laboratoryclass equipment with a cup volume of 2 liters. The distinctive feature of the SM 2.0 is the ability to adjust the rotational speed from 10 to 75 rpm.See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Laboratory sieve S 30/50 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, and in the middle part there is an embossing, which ensures the rigidity of the sieve. Sieve S 30/50 diameter 300 mm, height 50 ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Laboratory sieve S 50/70 consists of upper and lower frame, a sieving surface, screws with washers and nuts and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensure the rigidity of the sieve. Sieve S 50/70 diameter 500 mm, height 70 ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Laboratory sieve S 40/70 consists of upper and lower frame, a sieving surface, screws with washers and nuts and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensure the rigidity of the sieve. Sieve S 40/70 diameter 400 mm, height 70 ...
Manufactured by:Vibrotechnik LLC based inPetersburg, RUSSIA
Laboratory sieve S 40/140 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensures the rigidity of the sieve. Sieve S 40/140 diameter 400 mm, height 140 ...