- Home
- Equipment
Refine by
Ytron Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
YTRON VacuPlant® is a universally applicable system for mixing and dispersion of powders and liquids. Using vacuum to draw in powder, the VacuPlant will disperse, dissolve, deaerate and emulsify with ability to heat and cool as required. Optimised process configuration. We work in partnership with our customers to develop tailor-made process ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
The powder is sucked in by the strong negative pressure created by the ZC-reactor head. Immediately after contacting the liquid phase, the powders are instantly wetted and thoroughly dispersed. This process is actually completed before the powder is fully hydrated. Due to the extremely short time shear forces are applied, the process is a very gentle one. In most cases a single pass operation ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
A typical solution for many applications in the field of Food-, Pharmaceutical, Chemical and Cosmetic Industries is the use of a High Pressure Homogenizer. YTRON-ZHV may be a real alternative for your process, offering an important added value. YTRON-ZHV is designed for peripheral speeds of up to 60 m/s. Several different configurations are available. In a good number of applications, the effect ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
ncorporation of lump-free powder which do not tend to stick in liquid template in a batch process. Designed for ATEX applications. System configuration according to customer ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
Surfactants (e.g. sodium lauryl ether sulfate = SLES) are used in many cleaning products for personal and household use. As a rule, these raw materials are produced and transported in a highly concentrated, thick fluid form. However they require to be diluted before further processing can be carried out. In the case of SLES, a dilution from 70% down to a maximum of 28% is ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
In process engineering, mixing refers to the combination of substances in a single or multi-phase system. The aim is to compensate for or significantly reduce differences in concentration and/or temperature. If this condition persists, the mixing process is also called homogenization. Commonly referred to as stirrers, these devices allow liquids of different viscosity levels to be mixed. There ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
Powders and compounds with a tendency to form lumps are continuously incorporated inLine and effectively dispersed. This means that even in a single pass, very high concentrations can be achieved. The first stage in the reactor head creates a strong negative pressure and sucks the solids phase in. Immediately after contact with the liquid phase, this premix of the 2 phases is impelled against the ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
One or more liquid phases, as well as unsuspended particles, are passed by a forced-feed passage through the rotor-stator-system. The In-line-principle effects a defined and reproducible application of shear forces. With the parameters of slot width, number and distance of the shear slots, number of rotor-stator-sets used, rotational speed and flow rate, the desired dispersing or homogenizing ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
BigBag station allows fast, lump-free powder incorporation in very short term. Perfect product quality. Low power consumption (only 7,5 kW up to 4 t/h powder ...
Manufactured by:Ytron Process Technology GmbH & Co. KG based inBad Endorf, GERMANY
Homogeneous and very quick mixing of liquids without air-entrainment. Ideally suitable from water like viscosities up to more than 50.000 mPas. No bearings and seals in the immersed section, therefore maintenance requirements are low. Easy to clean. Available for use in ATEX ...