Refine by
Aerated Filter Equipment & Supplies
117 equipment items found
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube basic technology of submerged aerated filters built in a number of standard units are easily scalable. Much like children playing with LEGO toy plastic building blocks. If the child wants to build a bigger house, he uses more LEGO blocks. If you need a bigger wastewater system, you need only more standard BioKube ...
Manufactured by:KWI International Environmental Treatment GmbH - Part of the SafBon Group of Companies based inFerlach, AUSTRIA
The KWI biological aerated filter combines biological oxidation and SS reduction together in one structure and eliminates the need for a secondary sedimentation. This process has multiple functions such like SS, COD, BOD5 removal, and ...
Manufactured by:Jacopa Limited based inWest Midlands, UNITED KINGDOM
Jacopa’s Copa SAF has a proven performance record, supported by almost twenty years of development and many installations throughout the worldwide wastewater industry. The Copa SAF has an immediate effect on BOD reduction, and the system can be 100% effective within four weeks of start-up. Copa SAF is a fixed film biological treatment unit, capable of treating municipal and industrial ...
Manufactured by:Clearion Water Technologies based inAshland, OHIO (USA)
99% Radon Removal. Stream-line modular design. Proprietary Quadtrain air injector nozzle with flow rates of 2.5 – 10 gallons (can also be custom configured based on well capacity). Turbulance ensures radon in water gets released. Force of blower esnures radon gas is safely vented outside. Transducer monitors water flow. Controller will cycle pump off and on as needed to ensure clean water ...
by:Pure Water Technology LLC based inAbu Dhabi, UNITED ARAB EMIRATES
Within the wastewater industry (SAF) Submerged Aerated Filter Technology is seen as the simplest and most cost effective method of commercial and residential sewage sanitation / waste water treatment, particularly for small to medium sized treatment plants where available land is limited, and where full time operational manning would be uneconomical. ...
Manufactured by:Process Wastewater Technologies LLC based inRosedale, MARYLAND (USA)
This high-performance submerged aerated biological filter provides proven treatment of domestic and industrial wastes in hundreds of installations worldwide, the Submerged Aerated Filter (SAF) has few moving parts, requires very little maintenance and is easy to operate. ...
Manufactured by:Industrie De Nora S.p.A. based inMilan, ITALY
The TETRA SAF submerged aerated filters are a simple process for the biological oxidation of ammonia-nitrogen (NH3-N) and BOD for both municipal and industrial wastewaters. TETRA SAF is an upflow, fixed-film biological reactor that uses coarse media requiring no ...
by:Euroby Limited based inWorthing, UNITED KINGDOM
Traditional Submerged Aerated Filters (SAF), have a proven track record for providing high quality biologically treated effluent. However they are sometimes prone to be power hungry. In our quest for higher efficiency and less energy costs, we offers our Intelligent SAF (I-SAF) unit which incorporates energy saving devices; resulting in power savings of over 50% ...
Manufactured by:KWI International Environmental Treatment GmbH - Part of the SafBon Group of Companies based inFerlach, AUSTRIA
The KWI biological aerated filter combines biological oxidation and SS reduction together in one structure and eliminates the need for a secondary sedimentation. This process has multiple functions such like SS, COD, BOD5 removThe KWI biological aerated filter combines biological oxidation and SS reduction together in one ...
Manufactured by:Purestream based inStockport, NORTHERN IRELAND
Submerged Aerated Filters (SAF) deliver robust, high-quality biological treatment for municipal and industrial wastewater. These compact, modular systems use submerged media and fine-bubble aeration to promote the growth of biofilms that break down organic material and remove ammonia. ...
Manufactured by:ATAC Solutions Ltd - Axius Water based inMaidstone, UNITED KINGDOM
The standard ATAC SAF units range from ATS24, ATS32, ATS44, to ATS55; however, bespoke SAFs can be designed and manufactured depending on specific requirements. SAFs can provide treatment for a range of populations and loadings. These units can be installed above or below ground, providing flexibility in their configuration to suit site requirements. ATAC SAF units utilise a series of individual ...
Manufactured by:Shivam Water Treaters Pvt. Ltd. based inAhmedabad, INDIA
Submerged Aerobic Filter (SAF) incorporates the advantages of Fixed Film Technology combined with Fine bubble Diffused Aeration. SAF is highly suitable for medium and low strength wastewater. Shivam design good quality submerged aerated filter to reduce the amount of BOD and ammoniacal nitrogen in settled sewage and industrial ...
Manufactured by:WaterSoft Inc. based inAshland, OHIO (USA)
Air is injected into the top of the tank converting ferrous iron to ferric iron after untreated water has passed through the control valve preventing the control valve from fouling with iron. Isobar™ III electronic control valve. Legacy View Bluetooth enabled control valve for advanced diagnostics and simplified setup. Simple 9-volt battery back-up keeps electronic meter active and will ...
Manufactured by:Eflo International Ltd. based inOxfordshire, UNITED KINGDOM
The EfloSAF Submerged Aerated Filter or SAF, is a very compact, robust and trouble free process ideally suited to package type plants for communities and labour camps. The process employs a structured, support media and this forms an ideal place for the biomass to attach itself. ...
Manufactured by:ATAC Solutions Ltd - Axius Water based inMaidstone, UNITED KINGDOM
vSAF is a biological treatment plant that can be used for both secondary treatment (BOD and ammonia removal after primary settlement tanks) and tertiary treatment (additional nitrification for existing humus tank effluents). It is built offsite which reduces construction time when compared to other on-site build options. ...
Manufactured by:FLI Water Limited based inKempston, UNITED KINGDOM
Brightwater BAFF® is the UK's leading Biological Aerated Flooded Filter (BAFF) technology. It incorporates the latest process and engineering advances, to provide small footprint plant with low capital and operating costs. An innovative and flexible design approach allows construction of plants serving populations from 500 to 350,000+ and for varying consent ...
Manufactured by:Gasion Airtec Pvt. Ltd based inChennai, INDIA
Above ground biohut biofilters turbo charge nutrient removal in wastewater and Lake. Biohut biofilters are the perfect habitat for microbes without the need for additional aeration systems. The technology can easily increase the efficiency and durability of a wastewater treatment process, at low cost and low energy. Ideal for treating both low & high BOD/COD wastewater, Biohut technology is ...
by:Finsterwalder Umwelttechnik GmbH & Co. KG based inBernau, GERMANY
The soil filter aeration technology is a development of Finsterwalder Umwelttechnik with the aim of inerting organic landfill ingredients (eg ammonium) or organic impurities in the soil (eg petroleum hydrocarbons). Our areas of application include the remediation of organically contaminated, complex old sites, old deposits, dumps, landfills, intermediate and ...
Manufactured by:Waterworks Technologies Inc. based inCalgary, ALBERTA (CANADA)
Waterworks’ Trickling Filter Extended Aeration (TFEA) system uses combined attached and suspended biological growth systems to remove over 90% of soluble organics (BOD and COD) and suspended solids. The TFEA is suitable for treating both municipal sewage for stand alone performance and tough industrial wastewaters for surcharge reduction. ...
Manufactured by:Polytech Filtration Systems based inHudson, MASSACHUSETTS (USA)
Polytech's patented low entry vacuum filters are innovatively designed to tackle challenges often encountered when working with heavily aerated fluids. These filters function effectively even when the coolant entry height is minimized, such as 10 inches, and can manage aerated grinding and cutting oils without the need for ...