Refine by
Bilge Separator Equipment & Supplies
26 equipment items found
Manufactured by:HSN-Kikai Kogyo Co., Ltd. based inHyogo, JAPAN
The smallest installation space of bilge separator in the worldThe front face is open to facilitate easy servicing and inspection. Piping including the bilge inlet and treated water outlet face the same direction for easy installation. The biggest advantage is its compact design, which allows existing bilge ...
Distributed by:Hermont Marine Inc. & Hermont Tech based inSt Laurent, QUEBEC (CANADA)
The SKIT/S-DEB Bilge separator complies with IMO Resolution MEPC.107(49). The Skit/S-DEB combines the efficient open porous coalescer with a second stage emulsion breaking oil and hydrocarbon polisher to achieve consistent and reliable performance. Periodic back flushing assures coalescer efficacy for long lasting, maintenance free ...
Manufactured by:Compass Water Solutions (CWS) based inTustin, CALIFORNIA (USA)
ULTRA-SEP G Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. G Series provide the same. Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger. ...
Manufactured by:Compass Water Solutions (CWS) based inTustin, CALIFORNIA (USA)
ULTRA-SEP is a two-stage system. The fi rst stage effi ciently removes free oil using our HELI-SEP coalescing matrix separator, which is familiar to ship operators worldwide, with more than 20,000 in service around the world. The second stage SPIR-O-LATOR technology provides a positive physical barrier to break emulsions and provide continuous less than 5ppm discharge. In fact, oil cannot ...
Manufactured by:Compass Water Solutions (CWS) based inTustin, CALIFORNIA (USA)
Three-stage coalescer-type system. Removes non-soluble oil, solids, and entrained air from an oily water solution. 20 gallons per minute (0.5 m3/h). Continuous and intermittent operation. Automatic control capability for discharging accumulated ...
by:Jowa AB based inKållered, SWEDEN
Jowa Oily Water Separator is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x ...
Manufactured by:Compass Water Solutions (CWS) based inTustin, CALIFORNIA (USA)
ULTRA-SEP C Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. C Series provide the same Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger . ...
Manufactured by:Environmental Protection Engineering S.A. - EPE S.A. based inPiraeus, GREECE
POSEIDON FIT Bilge Oil Water Separator consists of two stages; the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode, by passing the second stage, and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 4ppm, then the emulsion breaking unit begins its operation. ...
Manufactured by:Environmental Protection Engineering S.A. - EPE S.A. based inPiraeus, GREECE
POSEIDON EC Bilge Oil Water Separator consists of two stages; the coalescer and the electrolytic emulsion breaking unit. The coalescer works on a continuous mode, by-passing the second stage. If the detection monitor senses content higher than 4ppm at the effluent of the coalescer oil, then the emulsion breaking unit begins its operation. ...
Manufactured by:Environmental Protection Engineering S.A. - EPE S.A. based inPiraeus, GREECE
POSEIDON EVO unit contains two stages, the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 14ppm, the emulsion breaking unit begins its operation. The unit contains an effective hydrocarbon absorption material which ensures an excellent effluent quality with ...
Manufactured by:UC Marine (China) Co., Ltd based inJinwan Disthct, Zhuhai City, CHINA
15 ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15 ...
Manufactured by:Marinfloc AB based inVarekil, SWEDEN
The CD unit by Marinfloc is a recognized bilge water treatment system employed on more than 700 vessels globally, encompassing both newbuildings and retrofitted ships. The system incorporates dissolved air flotation and flocculation technology, catering to a capacity range from 0.25 to 5 m3/h. One of its key features is its consistent ability to treat bilge water to below 5 ppm, aligning with ...
Distributed by:Hermont Marine Inc. & Hermont Tech based inSt Laurent, QUEBEC (CANADA)
DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. ...
Manufactured by:HSN-Kikai Kogyo Co., Ltd. based inHyogo, JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the ...
Distributed by:Hermont Marine Inc. & Hermont Tech based inSt Laurent, QUEBEC (CANADA)
The limitations in removing oil from water are dictated by physics. The smaller the suspended oil droplet, the longer oil takes to separate out. In addition, the smaller the oil droplet, the bigger its surface tension, thereby it becomes more difficult for oil drops to join, i.e. to coalesce. Therefore, the oily water separator when processing ...
Manufactured by:Whale - Navico Group based inBangor, UNITED KINGDOM
Part nos: SS5212 650 12V, SS1212 1100 12V (shown above), SS1224 1100 24V. The original automatic, electric bilge pump: award-winning, low profile, and proven over 20 years. Flow rate up to 66L per minute (1100 US GPH). Also available in 40L per minute (650 US GPH) model. No separate bilge switch required. Low profile design is ideal for narrow ...
Manufactured by:Membrane Srl based inMilano, ITALY
Sewage treatment applications designed and developed by Membrane range from traditional systems based on ACTIVE SLUDGE, to MBR (membrane bioreactor) systems, and also CHEMICAL-PHYSICAL units, BILGE SEPARATION systems (compliant with IMO 107/49 regulations). our different technologies to solve any treating and disposing of sewage streams. Membrane guarantees ...
by:Jowa AB based inKållered, SWEDEN
The unit separates up to 80% of the water in the emulsion. The treated water is then fed to an MEPC 107(49) approved bilge water separator. The residue is pumped to the concentrated sludge tank. The system is operating automatically, in a step-by-step program (PLC controlled). ...
Manufactured by:Lamor Corporation Ab based inPorvoo, FINLAND
The V-shaped hull, keel, and stringers give stability and protection when landing on rocky shores. The hull is divided into three watertight compartments equipped with separate bilge pumps. Moreover, the LC 6500 has a protective rubber D80 ...
Manufactured by:Marinfloc AB based inVarekil, SWEDEN
This flexible system is designed to function as a standalone solution for treating EGR bleed-off water, and with appropriate upgrades, it can also perform as an efficient bilge water separator. MAN Energy Solutions' EGR technology focuses on reducing NOx emissions by reintroducing part of the engine's exhaust gas, ensuring compliance with environmental ...