Refine by
Applications
- Water reuse solutions for open reservoirs
- Solid-Liquid Separation and Sludge Reduction Equipment for Solar and wastewater
- Water treatment and mixing equipment for industrial water sector
- Water Pollution Control and Recovery Equipment for Oil & Grease Removal
- Water Pollution Control and Recovery Equipment for Oily Water Treatment
- Water Pollution Control and Recovery Equipment for Coolant Recovery Systems
- Water Pollution Control and Recovery Equipment for Pre-Treatment Solutions
- Water quality solutions for improving CT, reduced chlorine usage & THM formation
- Water quality solutions for improved mixing in rapid mix basins
- Water quality solutions for nitrification Chloramine areas
- Water quality solutions for raw water reservoir active sector
- Active circulation solutions for recreational lakes & reservoirs
- Small lake & pond active circulation solutions
- Liquid/solid separation equipment for flocculation and clarification
- Sludge removal for municipal water treatment
- Wastewater Treatment Solutions for Oil & Gas
- Wastewater Treatment Solutions for Mining
- Wastewater Treatment Solutions for Industrial
- Liquid Microbial Formulation Solutions for Aquaculture
- Jet Mixing and Jet Aeration Technologies for Activated Sludge Treatment
- Spiral Heat Exchanger for Process Industries
- Spiral Heat Exchanger for Wastewater Treatment
- Water treatment & distribution system solutions for mixing for distribution tanks sector
- Municipal wastewater solutions for primary clarification industry
- Municipal wastewater solutions for secondary clarification industry
- Sludge removal for sedimentation tanks
Bottom Sludge Equipment & Supplies
264 equipment items found
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
The Z2000 Bottom Sludge Scraper is designed to provide continuous sludge transportation and performs well in all sedimentation processes, even in a sand trap. The Z2000 can be adapted to the most varied requirements because it is not dependent on where the operation is located and there is a choice between a hydraulic drive and an electric motor. ...
Manufactured by:Clean Water Technology, Inc. based inGardena, CALIFORNIA (USA)
CWT delivers a wide variety of cone bottom tanks, plastic linear high-density (HDLPE) and cross-linked high-density (XLPE) resins and stainless steel. Cone bottom tanks range from 55 gallons to 40,000 gallons. Stainless steel tanks from 40,000 gallons on up. Varying degrees of conical bottoms determine the rate material can exit the tank. Cone ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
A sludge truck will be the preferred solution for small to medium size systems. With the sludge truck, the sludge is transported to another location where it is processed. The treatment process here will typically be a large wastewater treatment system, a local dewatering system or a root zone system. For up to 10 m3 / day systems, the desludging ...
Premium
Manufactured by:Ixom Watercare based inDickinson, NORTH DAKOTA (USA)
Floating, AC powered, circulation equipment for wastewater treatment and freshwater applications. Continuous operation on single-phase AC ...
Premium
Manufactured by:Ixom Watercare based inDickinson, NORTH DAKOTA (USA)
Floating, AC powered, circulation equipment for wastewater treatment and freshwater applications. Continuous operation on single-phase AC ...
Premium
Manufactured by:Ecological Laboratories, Inc. (ELI) based inIsland Park, NEW YORK (USA)
MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom solids that are slow to degrade. MICROBE-LIFT/Sludge-Away works faster at warm water temperatures, however, it may be used effectively at any temperature ...
Premium
Manufactured by:Ixom Watercare based inDickinson, NORTH DAKOTA (USA)
Reservoir Mixing & Circulation with the SolarBee SB2500. Engineered for a Wide Range Of Applications. Floating, solar powered, circulation equipment for wastewater treatment and freshwater applications. Day/night operation on solar only by utilizing a battery to store excess daytime power for nighttime ...
Premium
Manufactured by:Ixom Watercare based inDickinson, NORTH DAKOTA (USA)
Power System: Continuous operation on single-phase AC power. Frame Construction: T316 stainless steel. Floatation: Foam-filled high-density polyethylene (HDPE) floats. Intake: 16" thermoplastic rubber intake hose with HDPE strainer. SCADA outputs. Wireless options are available. Disinfectant boosting capable. Certified to NSF/ANSI 61 and NSF/ANSI 372 standards. Excellent Medora warranty and more. ...
Manufactured by:Yangzhou Maoyuan Environmental Protection Technology Co., Ltd based inYangzhou City, CHINA
This device adopts reciprocating movement model, to collect the bottom sludge in the horizontal sedimentation tank and discharge them out, it has water running in from one side and out from the other side, there is a certain slope (about 8/1000) at the bottom. And the gauge is usually around 4-25m. When the width of the pool is large, it can be ...
by:Colubris based inWinterswijk, NETHERLANDS
The PCS and CPS cross-flow separators are designed to separate settling parts like fibers, starch and sand from the wastewater.. Depending on the type of wastewater a PCS settler (executed with one or more sludge cones for the bottom sludge) or a CPS settler (executed with an auger sludge thickener for the bottom ...
Manufactured by:Stetfield Separators Ltd. based inHelston, UNITED KINGDOM
Primary wastewater solids settling and thickening via inclined parallel plates and bottom sludge-cones in sizes up to ...
Manufactured by:CassCo Bio Labs based inSt. Louis, MISSOURI (USA)
Our proprietary pond bacteria formulation contains a blend of beneficial pond bacteria that can perform in water temperatures as high as 110 F, and as low as 35 F. We have pressed our pond bacteria powder into pre-measured dissolvable tablets, which sink to the bottom of the pond, to help reduce bottom-sludge (muck). Just apply the dissolvable ...
Manufactured by:Probig GmbH based inVöcklamarkt, AUSTRIA
Top quality-certified worldwide for the petrochemical industry. PROBIG® creates worldwide innovative solutions for the most diverse API applications to remove bottom sludge and floating scum. Our API scrapers are designed according to norm 421 of the API (American Petroleum Institute). With their great energy efficiency, functionality, reliability and ...
Manufactured by:CassCo Bio Labs based inSt. Louis, MISSOURI (USA)
Just toss packets directly into the pond, and they start to dissolve within minutes. Our pond bacteria formulations have been proven for over 25 years, to naturally eliminate murky water, bottom-sludge (muck), excess fish food, fish wastes, problem nutrients (such as nitrate and phosphate), toxins (such as ammonia and nitrite) and odors. Our natural pond bacteria ...
Manufactured by:Keeton Industries, Inc. based inWellington, COLORADO (USA)
PondToss creates a natural, beneficial Bio-Floc, while reducing ammonia, nitrite and nitrate. PondToss digests organic solids and bottom ...
Manufactured by:Sereco S.r.l. based inNoci (Ba), ITALY
The PRVR type consists of a traveling girder used as a walkway, a couple of lateral sliding trolleys, an articulated system for sludge scraping and scum overflow, gear motor for lateral trolleys drive, drive unit of articulated system for bottom sludge scraping and control panel. The gear motor and the drive unit are fitted on in correspondence ...
Manufactured by:Stemdrive Ltd based inDumfriesshire, UNITED KINGDOM
This is our standard sludge mixing nozzle – it has an aggressive ‘Roll Over’ mixing action, which mixes from bottom to top of sludge, prevents stratification and the formation of crust or ...
Manufactured by:FRIULANA COSTRUZIONI s.r.l. based inVigonovo Di Fontanafredda, ITALY
To-and-fro bridge with scraper vanes: The to-and-fro bridge with scraper vanes must be mounted in the rectangular sedimentation tanks. Its function is to convey (in delivery) the materials deposited on the tank bottom (such as sludge, sand, etc.) to a special reinforced concrete basin through the sludge scraper blades. In return, it conveys the ...
Manufactured by:Prions Biotech based inBelagavi, INDIA
Aqua Balance-PR creates a natural, beneficial Bio-Floc, while reducing ammonia, nitrite and nitrate. Aqua Balance-PR digests organic solids and bottom ...
Manufactured by:Sunkaier based inDingshu, Yixing, CHINA
A Side Entry Mixer finds its application in fluid displacement which is fundamental to process result of its application like off-bottom suspension to avoid sludge deposition. ...