Refine by
Breath Gas Equipment & Supplies
76 equipment items found
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
The AirGuard is a portable Grade D breathing air system which meets NFPA and OSHA requirements. It combines a three stage filter system which removes oil, water, particulate matter and odors with Carbon Monoxide, differential Dew Point and CFM flow ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
A Multi-Sensor Transportable Analyzer for Medical Gas Verifier/Certifier Field Usage. The MATRIX medical gas verifier is designed for the real-time analysis and verification of hospital gases to ensure compliance with NFPA ...
Manufactured by:Vadi Medical Technology Co., Ltd. based inTaoyuan City, TAIWAN
The product equipes with humidification chamber and the heated wire inside the inspiratory and expiration limb. It can humidify and heat the breathing gas delivered to patient in order to provide warm and humid breathing gas to patient.The expiration heated wire can reduce condensation from the tube. ...
Manufactured by:Vadi Medical Technology Co., Ltd. based inTaoyuan City, TAIWAN
The product equipes with humidification chamber and the heated wire inside the inspiratory limb. It can humidify and heat the breathing gas delivered to patient in order to provide warm and humid breathing gas to infant. In addition, it also equipes with the heated wire in the expiratory limb for preventing the excessive water ...
Manufactured by:Vadi Medical Technology Co., Ltd. based inTaoyuan City, TAIWAN
The product is a set of reusable adult resuscitator. It is to manually supply breathing gas to patient's lungs squeezing the flexible bag of the product. The mask of the product is an interface of delivering breathing gas to patient. If medical staffs can't use the mask on patient. They can use the airway to establish an opening ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Application A rebreather is a type of breathing set that provides a breathing gas containing oxygen and recycled exhaled gas. AV-16 series sanitary re-breather has similar function with micro filter. It can prevent external particulates from entering the storage tank, ensuring the air purity in the tank. ...
Manufactured by:DEHAS Medizintechnik & Projektierung GmbH based inLübeck, GERMANY
DEHAS oxygen monitor QualityMON is used to determine and monitor oxygen concentrations in breathing gas mixtures in medical ...
Manufactured by:Om Air Special Gases based inFaridabad, INDIA
In Laser Mixtures, Pressurising Gas, Helium Leak Detectors, Breathing Gas For Drives, Carrier Gas In Gas Chromatography, In Neon Sings, Insert Shielding Gas for Arc Welding, Air ...
Manufactured by:Norris Cylinder based inLongview, TEXAS (USA)
ASME accumulator shells can be used in breathing air, inert gas, hydrogen, and other gas applications. With a maximum operating pressure of 7500 psi, these shells have an inside diameter of 8" and a length of 54." ...
Manufactured by:Applied Sensing Technologies, Inc. based inChino, CALIFORNIA (USA)
The AST-17E Scuba Diving Oxygen Sensor is designed to replace the R17D-NUV, offering high output performance specifically for scuba diving oxygen content measurement. Integral to its operation in verifying oxygen levels in breathing gas cylinders, the sensor features an average output of 25 mV in air. It is equipped with a 3.5mm mono jack electrical connection ...
Manufactured by:Bearings Plus, Inc. based inHouston, TEXAS (USA)
Honeycomb seals were initially used in the aerospace industry in air-breathing gas turbine engines as abradable stator components for high-pressure turbine stages. Later, honeycomb seals were used in cryogenic rocket engine turbopumps as a damper seal at the balance piston location. Eventually this technology was adopted by the industrial market, which primarily ...
Manufactured by:KNESTEL Technologie & Elektronik GmbH based inHopferbach, GERMANY
The project objective was the development of a compact, portable, battery-powered performance diagnosis system for measuring CO2, O2, humidity, pressure and temperature in the breathing gas. The measured data serve as a basis for a training recommendation for the athlete. The performance diagnostics should be fast, continuous and flexible (indoor and ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen monitors. ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen monitors. ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen ...
Manufactured by:Weyer GmbH based inKürten, GERMANY
Optionally, a suction unit can be integrated in the insufflation assembly which makes this device indispensable for various non-invasive applications of breathing gas support in pediatrics, neonatology and adult ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
Intended Use: These oxygen sensors, with their excellent stability, performance and linearity are designed to be used to monitor the partial pressure of oxygen in breathing gas mixtures for anaesthesia, ventilators, medical oxygen concentrators, incubators, and general oxygen monitors. ...