Refine by
Applications
- Screening Equipment and Filters for Power Plants
- Screening Equipment and Filters for Oil and Gas
- Articulating Concrete Mattress System for Boat Ramps
- Articulating Concrete Mattress System for Access Roads/Driving Surface
- Articulating Concrete Mattress System for Border Wall Infrastructure
- Articulating Concrete Mattress System for Bridges
- Articulating Concrete Mattress System for Coastal Protection
- Articulating Concrete Mattress System for Culvert Protection
- Articulating Concrete Mattress System for Dams & Levees
- Articulating Concrete Mattress System for Energy
- Articulating Concrete Mattress System for Landfill Down Chutes
- Articulating Concrete Mattress System for Low-Water Crossings
- Automated wire processing solutions for quality solutions areas
- BIA-ACC Device for OSO-Test
Cable Testing Equipment & Supplies
334 equipment items found
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 300 ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 400 ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage fKVl: 150 ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The heavy-duty KT 638 high-voltage tester uses 512 test points to test high voltage up to 1500 VDC and high current up to 2 ADC in stand-alone operation or integrated into a production line. The versatile KT 638 reliably performs connection tests, short-circuit tests, high-voltage insulation tests, and component tests.The KT 638 wiring tester impresses with its intuitive operation via an LC ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 231 high-voltage tester with PC control offers up to 512 test points and checks up to 1000 VDC. Optimized for operation on test panels and test desks. The NT 231 wiring tester, the smallest high-voltage tester in adaptronic''s NT series, was specifically developed for operation on test desks and test benches. With functions such as adapter LEDs, an insertion aid for the production of wire ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KT 236 mobile high-voltage wiring tester with display and control software in a hard-shell case checks up to 512 test points for insulation up to 1000 VDC and test voltages of 80 - 1000 V. The portable KT 236 test system can be used anywhere thanks to its waterproof, hard-shell case that even floats. In this context, the wiring tester easily handles even the toughest environmental conditions ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 628 modular wiring tester with 512 test points for automated production lines optionally performs high voltage tests up to 1500 VDC and high current tests up to 2 ADC. The NT 628 modular wiring tester is specially designed for automated production lines. With 512 test points, the system guides connection, short-circuit, and component tests as well as optional high voltage tests up to 1500 ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The basic version of the KT 410 low-voltage wiring tester includes 2048 test points (expandable to 16,384) and is ideal for testing with a high number of test points. The KT 410 low-voltage wiring tester also masters complex testing tasks. Whether in small back panels or extensive test bench applications in large-scale production – this versatile system reliably tests connections with test ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TriGuard HV test bench with a 3-sided light curtain for accessibility uses a conveyor system to securely transport high-voltage wires into the test area. With the TriGuard test bench system, the test item is transported to the secured HV test area by means of a conveyor system and can be connected there for the test. After the test, the wire set is conveyed out of the test area again. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 410 / NT 411 low-voltage wiring tester with the NT Control control software tests voltages up to 25 V and currents up to 25 mA at 2048 or up to a maximum of 16384 test points. The NT 410 / NT 411 test device checks the quality of every electrical connection with a single device – from the smallest printed circuit board to the most ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 800-2 wiring tester with up to 131,072 test points and a maximum test voltage of 6000 VDC/5000 VAC is specially developed for testing rail vehicles. The NT 800-2’s distributed test system consists of a base unit with CPU, measurement technology as well as HV generators and TPUs (test point units). ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TS1500-HV system has been specially developed for testing of high-voltage and data sensor cables. It conforms to international standards and will be used in the cable assembly. The test system TS1500-HV is suitable for the automated testing of video, antenna and sensor cables, for example ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 211 low-voltage wiring tester is designed for testing network cabling. It has 512 test points and can be extended to up to 2048 test points. The NT 211 low-voltage wiring tester is ideal for use on test desks and test benches, but can also be used in stand-alone operation. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TS1700-HF high-frequency test system has been developed for reliable and accurate testing of coaxial cables in the automotive industry. It conforms to international standards. The horizontal test grid of the TS1700-HF allows access from all sides, allowing multiple operators to test cables ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The high-voltage test bench system with fully integrated test technology can be used to test cables and wire harnesses with voltages up to 5000 VAC/6000 VDC. The HV test bench system from adaptronic enables connection tests, short-circuit tests, component tests, ...
Manufactured by:Kabelwerke Villingen GmbH (KWV) based inVillingen, GERMANY
Short development cycles and efficient production times ensure reliable logistical planning. We know that our customers need to keep development cycles short and to ensure that production times are fast. And in our company, the entire workflow is designed with precisely this in mind: to suit your ...