Refine by
Cable Testing System Equipment & Supplies
29 equipment items found
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The Syscompact 400 portable is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The Syscompact 400 is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TS1500-HV system has been specially developed for testing of high-voltage and data sensor cables. It conforms to international standards and will be used in the cable assembly. The test system TS1500-HV is suitable for the automated testing of video, antenna and sensor ...
Manufactured by:CAMI Research Inc based inActon, MASSACHUSETTS (USA)
The M3Z differs from the M2U in that the M3Z a) employs a different electronic design, b) controls active test points through the software (eliminating the toggle switch seen in the M2U), c) is expandable to 2560 test points, d) allows resistance measurement to be made, so you can check the quality of your connections as well as the value of embedded resistors, and e) allows measurement of ...
Manufactured by:CAMI Research Inc based inActon, MASSACHUSETTS (USA)
This entry level tester provides basic continuity measurement in cables and small wire harnesses. It is suitable for cables carrying digital signals or any electronic signaling where small amounts of resistance in the cable or connections will not affect the function of equipment to which the cables are connected. The tester includes a 128-point fixture, a probe port, and electronics permitting ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Wireless Test Adapter enables real-time error detection and inline testing, ensuring faster production, and reducing manual checks in wire harness production. The Wireless Test Adapter enhances efficiency in wire harness production through seamless integration into static, rotary, and conveyor systems. It automates continuity ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low-voltage cable tester Cirris 4200 ensures precise detection of opens, shorts, miswires, and other errors, starting with 128 test points and expandable to 1024. The Cirris 4200 cable tester is designed to bring precision and efficiency to your cable testing needs. Equipped with the robust Cirris OS software ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The small, economical and compact TS1400 test system has everything for testing wire harness in the automotive supply industries and cable assembly. The TS1400 test system is suitable for the testing ofsmall and medium wire harnesses. The test grid facilitates ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...
Manufactured by:Amphenol Corporation based in
10G PORT TESTING SOLUTION Amphenol's 10G SFP+ MSA compliant Loopback Modules are part of Amphenol's comprehensive copper cable and connector product family. Offered as passive electrical, our SFP+ Loopbacks come with and without EMI spring fingers. Loopbacks without EMI spring fingers reduce the insertion and extraction ...
Distributed by:ISSWWW based inNorwich, UNITED KINGDOM
High performance, multifunction test instrument for LAN cabling verification. Instrument Multi LAN 350. Remote unit Multi LAN 350. Permanent Link adapter, 2 pcs. Chanel Link adapter, 2 pcs. Locators (#1 ... #4), 4 pcs. Attenuation calibration module. Power supply adapter, 2 pcs. Headphones set, 2 pcs. Carrying bag, 2 pcs. PC SW LAN Link with USB and RS232 cables. 12 x 1.5 V NiMH rechargeable ...
Manufactured by:Kongsberg Maritime AS based inKongsberg, NORWAY
The K-Pos DP-11/12 dynamic positioning system consists of a DP controller unit and a dedicated operator station. Both systems satisfy IMO DP Class 1. The controller unit and the operator station communicate via a dual high-speed data ...
Manufactured by:Solar Electronics Company based inNorth Hollywood, CALIFORNIA (USA)
The AT-205/URM-6 loop sensor described in Test Method RE01 of MIL-STD-462 is one of the antennas designed for use with the Navy AN/URM-6B and Stoddart NM-10A receivers. These were the low frequency EMI meters that, in 1948, initiated the emphasis on EMI by the military departments and created the technical discipline we now know as Electromagnetic ...
Manufactured by:Megger based inDallas, TEXAS (USA)
Simplify and enhance medium voltage cable testing with the VLF Sine Wave 62 kV. Designed for commissioning tests and condition assessment, it combines portability, performance, and a wide application range, making it the ultimate solution for utilities and professionals ...
Manufactured by:HV Diagnostics Inc. based inWoodstock, GEORGIA (US) (USA)
This model replaces the ground breaking and very popular model HVA30. The HVA30 was upgraded to the HVA34 to accommodate the new testing requirements for 25kV rated cables as per the latest revision of IEEE400.2 testing standard. Arguably the top selling VLF/DC instrument on the market, this instrument has become the standard for testing 25kV rated cables and below. The upgraded model includes an ...
Manufactured by:Efficiency Scientific Instrument Co., Ltd (ESI) based inSuZhou City, CHINA
Simply the Best > High count rate high-resolution SDD detector > Large sample chamber >ppm level test accuracy for accurate determination of gold and all precious metals (silver, platinum, palladium, rhodium, iridium and ruthenium) > The fastest result is 10 seconds > Non-destructive analysis protects valuable jewelry, antiques and collectibles > One-click test, quickly get started > Expandable ...
Manufactured by:HV Diagnostics Inc. based inWoodstock, GEORGIA (US) (USA)
The HVA30-7 Extra Power VLF/DC Hipot model was designed primarily for electrical utilities that have large complex cable networks that demand a very powerful test instrument to overcome the large loads presented by these long cable systems. Capable of testing up to 150,000ft / 45km of cable - it ...