Refine by
Applications
- Water Pollution Control and Recovery Equipment for Oily Water Treatment
- Water Pollution Control and Recovery Equipment for Chemical Spills
- Water Pollution Control and Recovery Equipment for Sequential Batch Reactor (SBR) Plants
- Water Pollution Control and Recovery Equipment for Membrane Bio-Reactor (MBR) Plants
- Water Pollution Control and Recovery Equipment for Pre-Treatment Solutions
- Water Pollution Control and Recovery Equipment for Post-Treatment Solutions
Channel Gate Equipment & Supplies
207 equipment items found
Manufactured by:Dynamic Water Control Gates Inc. based inPointe-Claire, QUEBEC (CANADA)
Canal Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm. Materials Stainless steel (304 or 316) Galvanized or painted ...
Manufactured by:CMO Valves based inAltzo, SPAIN
Gate for open channel. Tightness in the bottom and both sides (3 sides). Sealings by EPDM joint or brass + EPDM. Gate with welded construction. Standard manufacturing materials are carbon steel and stainless steel. The gate can be adapted 100% to the customer requirements. ...
Manufactured by:Potential Engineering based inNavi Mumba, INDIA
Open channel gate is used to control the flow and to isolate fluids associated with water, wastewater, sewage treatment plants, power generation, irrigation schemes and process plants. A modern Open channel gate is designed to cater to a wide variety of duties from low seating to high off-seating heads. The size ranges from 150 ...
Manufactured by:Fontaine-Aquanox based inSherbrooke, QUEBEC (CANADA)
The Fontaine-Aquanox SERIES 25 gate is designed to control water flows in channels. It is the same construction as the Series 20 with the exception that it is not equipped with a top seal. The maximum allowable leakage is 0.04 US GPM per foot (0.5 l/min per meter) of the perimeter in seating and unseating head conditions (head conditions taken is equal to the ...
Manufactured by:Dynamic Water Control Gates Inc. based inPointe-Claire, QUEBEC (CANADA)
Dimensions Square or rectangular openings up to 1600 mm or 62'. Materials Stainless steel (304 or 316) Galvanized or painted ...
Manufactured by:Photon Systems, Inc. based inCovina, CALIFORNIA (USA)
The Photon Systems’ 32-channel gated integrating detector (32-CGID) is a plug & play gated boxcar integrator and average, similar to the Single Channel Gated Integrating Detector (SCGID), that synchronizes detection current sources such as PMTs, photodiodes, optical beam induced current detectors or ...
Manufactured by:Jash Engineering Limited based inIndore, INDIA
These open channel slide gates are used to isolate flowwithin as well as in and out of an open channel. These are suitable for seating water head and are provided with sealing arrangement on 3 sides only and not on top side and so the height of water should always be less than the height of ...
Manufactured by:Photon Systems, Inc. based inCovina, CALIFORNIA (USA)
The Photon Systems’ single channel gated integrating detector (SCGID) is a plug & play gated boxcar integrator and averager that synchronizes detection current sources such as PMTs, photodiodes, optical beam induced current detectors or other current sources with the emission from a Photon Systems deep UV laser. ...
Manufactured by:Potential Engineering based inNavi Mumba, INDIA
Sluice gate is also known as a penstock or slide gate. It is used to control the flow and to isolate fluids associated with water, wastewater, sewage treatment plants, power generation, irrigation schemes, and process plants. The selection of the Sluice gate in accordance with its duty, is important to satisfy the design criteria and to provide the most cost-effective solution. A modern Sluice ...
Manufactured by:Monolithic Power Systems, Inc. based inKirkland, WASHINGTON (USA)
The MP18811 is an isolated, single-channel gate driver solution with up to 4A of source and sink peak current capacity. The gate driver is designed to drive power switching devices with a short propagation delay and pulse-width distortion. By utilizing MPS's proprietary, capacitive-based isolation technology, the driver can provide 3kVRMS of ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Waste water sewer and channels with little slope can causes sediments during dry weather operation. Storm water catchment channels create sediments during storm events due to the sediment deposited on the channels or sewer floor. This creates potential for blockages and malodours will occur due to ...
Manufactured by:Eliquo Hydrok Ltd based inSt. Columb, UNITED KINGDOM
Throughout the UK there are many sewerage networks containing sewers in low lying areas where insufficient gradients cause siltation problems. This can lead to a loss of hydraulic capacity within the network, loss of performance of downstream treatment works or ancillary pumping ...
Manufactured by:Shandong Oubiao Information Technology Co., Ltd. based inJinan City, CHINA
Water Control Gates are suitable for water resource control, water volume scheduling, etc. of main canals, branch canals, bucket canals, and gross canals. The whole series of intelligent gates are composed of gates, control systems, power supply systems, cloud computing management platforms, management software and mobile APPS. The management platform controls the opening and closing of the gate ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Waste water sewers and channels with little slope causes sediments during dry weather operation and during storm events. The BIOGEST- Channel Flushing Gate Type CF is an ideal solution to solve this problem. In dry weather situation the channel flushing gate is in high position. As soon as the ...
Manufactured by:Freedrain BV, brand of Aquafix Milieu BV based inMijdrecht, NETHERLANDS
The Freedrain sluice gates (channel penstocks) are used to block the flow till the height of the door. They are manufactured from high quality HDPE and they will be reinforced with Stainless Steel 316L profiles. HDPE is lightweight and has a high chemical resistance. Standard, the sluice gates are fitted with a SS316L non-rising spindle. The ...
Manufactured by:ZET Industries Ltd. based inAshkelon, ISRAEL
ZCP-S series is a rectangular gate with 3 sides sealing. The gate can hold water head up to it's height and above it the fluid flows over the door. Dimensions: According to the customer's ...
Manufactured by:Orbinox based inAnoeta, SPAIN
Three-side sealing flush bottom channel penstock or gate for open channels. Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides. Used for on-off or control applications in open channels. Carbon or stainless steel fabricated construction, with ...
Manufactured by:Bidapro S.L based inAsteasu (Gipuzkoa), SPAIN
Sealed on 3 sides for installation on open channels and regulation of the flow. Fabricated square or rectangular port sliding channel gate for installation embedded in concrete and seals on 3 sides. Modulate design so that the frame be closed. Different construction materials, tightness by elastomer seal and guiding system with sliders to reduce ...
Manufactured by:Monolithic Power Systems, Inc. based inKirkland, WASHINGTON (USA)
The MPQ18831 is an isolated half-bridge gate driver solution with up to a 4A source and 8A sink peak current capacity. The gate driver is designed to drive power switching devices with a short propagation delay and pulse-width distortion. By utilizing MPS's proprietary, capacitive-based isolation technology, the driver can provide up to 5kVRMS of isolation ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Stop Gate and Stop Plate are interchangeable terms used to identify manually lifted gates that are installed in open channels. Stop gates are normally either in or out and do not include a stem or lifting mechanism. Smaller gates or gates with a balance (equalized) head can usually be raised by ...