Refine by
Clinometer Equipment & Supplies
22 equipment items found
Manufactured by:Halltech Environmental and Aquatic Research Inc. based inGuelph, ONTARIO (CANADA)
Suunto PM-5 provides a selection of height meters, clinometers and combined height- and clinometers. They are used all over the world by foresters, surveyors, engineers, cartographers, geologists, miners and architects and many others to measure heights, vertical angles and slopes quickly, reliably and ...
Manufactured by:Hpsystem.IT Srl based inPozzuoli (NA)., ITALY
The HPS AD057 MEMS device is a digital inclinometer used to monitor structures that are subject to inclination and/or rotation of any kind. It is equipped with a stainless steel package with IP-68 protection ...
Manufactured by:F.W. Breithaupt & Sohn GmbH & Co. KG based inKassel, GERMANY
Optical hand clinometer for determining slope and height of ...
Manufactured by:Jewell Instruments LLC based inManchester, NEW HAMPSHIRE (USA)
The Clinometer Pak 420 is the packaged version of our Tulip 4-20 mA clinometer. Its rugged aluminum enclosure provides mechanical and environmental protection for indoor or outdoor use. This uniaxial instrument is current loop powered, so measurements can be made over long cables using an economical 2-wire pair. ...
Manufactured by:Jewell Instruments LLC based inManchester, NEW HAMPSHIRE (USA)
The Model 904-T Clinometer Pak unites our Model 900 Biaxial Clinometer with a weatherproof NEMA 4X (IP65) enclosure for indoor or outdoor applications that demand mechanical and environmental protection. Choose the high-gain, standard or wide-angle version, each with a different angular range. Clinometer Pak’s internal circuitry accepts a ...
Manufactured by:Huggenberger AG based inDongio, SWITZERLAND
The sensor is based on the pendulum characteristics of a mass disk, of which the movement is measured capacitively. This sensor is mounted on a carbon fibre bar of 1000 mm length which acts indifferent to temperature. The measuring points are spherical set bolts embedded in mortar. This setting device ensures a reliable ...
Manufactured by:Huggenberger AG based inDongio, SWITZERLAND
The sensor is mounted on a stable, high precise ground base plate. This base plate allows a repeatable placement of the instrument on the set plates. Clinometer ECS110BL with set plate ESTF (with protective cover). ...
Manufactured by:Huggenberger AG based inDongio, SWITZERLAND
The sensor is based on the pendulum characteristics of a mass disk, of which the movement is measured capacitively. This sensor is mounted on a carbon fibre bar of 1000 mm length which acts indifferent to temperature. The measuring points are spherical set bolts embedded in mortar. This setting device ensures a reliable ...
Manufactured by:Jewell Instruments LLC based inManchester, NEW HAMPSHIRE (USA)
This economical biaxial clinometer has a wide variety of industrial, scientific and GPS uses. Many thousands are used today for antenna positioning, surface and subsea marine applications, structural monitoring, and industrial test and measurement. The clinometer is housed in an easily mountable enclosure and provides an RS232 serial interface and analog outputs ...
Distributed by:Hixon Mfg. & Supply Co. based inFort Collins, COLORADO (USA)
6.0' X 1.25 ' X 1.63 / 8 oz., Lubber line for direct azimuth/bearing, Readings from the side - accurate to +/- 2.5 degrees, Sapphire jewel bearing inside, A liquid dampened vial, Aluminum inclinometer card with precise scales for increased accuracy, Aluminum body sine scales (0-45 degrees) tangent scales (0-45 degrees), Inch & mm scales (0-5.25' & ...
Manufactured by:Brunton based inRiverton, WYOMING (USA)
A universal mapping tool. The Geo Transit can take measurements of dip angle and dip azimuth at the same time. Great for international data collection! A flat base allows for easier dip angle and dip azimuth measurements at low angles, while the needle can lock automatically ensuring accurate readings when the face of the instrument is not visible. Feel comfortable when shooting bearings with ...
Manufactured by:Brunton based inRiverton, WYOMING (USA)
If you are looking to save weight when in the backcountry, the ultralight ComPro Transit is your mapping solution. Made with all of the same internal components, the ComPro is over an ounce to 6 ounces lighter than any other Brunton Transit. We know that your transit is a life-long investment, that is why the internal components are sealed in place with an o-ring. The ComPro saves weight and is ...
Manufactured by:Brunton based inRiverton, WYOMING (USA)
Built with all of the functionality and features of traditional Brunton Transits, the Standard takes traditional strike & dip measurements and excels at low-angle readings with it’s flat bottom and non-slip silicon foot. We know that your transit is a life-long investment, that is why the internal components are sealed in place with an o-ring. The Standard Transit’s body is CNC ...
Manufactured by:Jewell Instruments LLC based inManchester, NEW HAMPSHIRE (USA)
Little Dipper is an in-place inclinometer system for monitoring slopes, embankments, deep excavations, tunnels, tank foundations, retaining walls and other types of ground movement. Installed as a string of vertical or horizontal sensors inside inclinometer casing, or by direct burial, this instrument provides a continuous record of ground displacement. Fiberglass rods connect the sensors inside ...
Manufactured by:Halltech Environmental and Aquatic Research Inc. based inGuelph, ONTARIO (CANADA)
Suunto Tandem is a liquid-filled precision compass and clinometer in one compact alloy housing. The Suunto Tandem hand-held precision instrument is used all over the world by antenna installation technicians, surveyors, engineers, miners, architects and many others to measure bearings quickly, reliably and ...
by:Rieker Inc: Rieker Instrument Company based inAston, PENNSYLVANIA (USA)
Our 4120BBL mechanical boom angle inclinometer is a -30 to +90 degrees unit with 5 degree increments. The housing is made of rugged thermoplastic making these clinometers extremely tough for all types of environments and weather conditions. With operating temperature ranging from -50°F to 180°F the 4120 is the perfect all-season boom angle indicator. The large, clear ...
by:Rieker Inc: Rieker Instrument Company based inAston, PENNSYLVANIA (USA)
Our 2055 mechanical inclinometer is ±60 degree unit with 5 degree increments. The housing is made of rugged ballistic plastic, making these clinometers extremely tough for all types of environments and weather conditions. The glass tube and ball construction provides smooth roll for accurate measurements. With operating temperature ranging from -45°C to 82°C the ...
Manufactured by:Pizzi Instruments S.r.l based inBagno a Ripoli (FI), ITALY
Our clinometer allows measurement of the variation in tilt of a rigid body in two orthogonal directions. The instrument is fixed in-place and when connected to an automatic acquisition system allows long-term observation as scheduled. The instrument is available in mono and biaxial version; in an IP66 housing for positioning horizontally or on a vertical wall. ...
by:Rieker Inc: Rieker Instrument Company based inAston, PENNSYLVANIA (USA)
Our 1000 series mechanical inclinometers are highly customizable instruments. Custom color warning zones make these inclinometers the most versatile instruments in the ...
Manufactured by:Hillco Technologies, Inc. based inNezperce, INDIANA (USA)
The Heart of Every Hillco Leveling System. We didn't try to reinvent the combine's drive system - we just moved it. In the past, the transmission to final drive power train on most leveling combines has been complex and expensive. The Hillco Leveling System moves the original transmission-to-final-drive assembly from the combine's main axle down to the leveling system's undercarriage. There are ...