Refine by
Coal Test Equipment & Supplies
30 equipment items found
Manufactured by:LAB-KITS, brand of U-THERM International HK Limited based inKowloon, HONG KONG
The Abrasive Index (AI) tester for coal is designed and developed according to GB/T15458-2006 "Method for Measuring Abrasive Index of Coal". It is specially designed to measure the degree of abrasiveness and tear of the lignite, bituminous coal and anthracite coal under the specified conditions when being ground, that is, the harder the coal, the greater the AI value. This is an important ...
Manufactured by:Amaze Instruments based inAligarh, INDIA
Furnace Temperature Range : 0°C - 1450°C. Temperature Controlling Accuracy : < 5°C. Resolution : 1°C. Sample Quantity : 5 samples each time. Temperature Rising Speed : Comply with national standard. Laboratory Atmosphere : Oxidability or weak reducibility. Power Supply : 220V, 50/60HZ. Maximum Power : < 5KW. Cabinet Dimension : 850mm×400mm×600 ...
Manufactured by:Amaze Instruments based inAligarh, INDIA
Automatic Bomb Calorimeter. Working Principle: Isoperibol, Type of bomb: Removable, Operating oxygen pressure: 3-4 MPa (30 bars), Measuring Range: 500-10000 K.cal/Kg, Working Temperature: 25° ± 5 ° C (Environment Controlled Conditions) ...
Manufactured by:Airflow Sciences Equipment, LLC based inLivonia, MICHIGAN (USA)
The portable Advanced Coal Flow Measurement (ACFM™) system measures the flow rate of primary air and pulverized fuel (PF) in pneumatic transport pipes according to ASME PTC 4.2, or optionally to ISO 9931 standards. For over 20 years, the system has brought a state-of-the-art solution to the problem of performing reliable, efficient, and accurate flow measurements of primary air and coal ...
Manufactured by:Airflow Sciences Equipment, LLC based inLivonia, MICHIGAN (USA)
The Clean Air Pitot Probe is utilized to measure air velocity, pressure, and temperature within a flow stream. It uses a standard S-Type pitot probe to measure velocity and thus can follow EPA Method 2 test procedures. The probe is connected to a pressure gauge or electronic pressure transducer to measure the differential. A wind tunnel calibration is necessary in order to ...
Manufactured by:Sylab Pvt. Ltd. based inHyderabad, INDIA
Automatic hammering (per ASTM D-2639-08, ISO 10329 ) system for sample preparation is ...
Manufactured by:Sylab Pvt. Ltd. based inHyderabad, INDIA
Swelling rate (increase in volume when heated) is an important indicator of the quality of coal for coking. It is determined by a standard dilatometric ...
Manufactured by:Sylab Pvt. Ltd. based inHyderabad, INDIA
The MFSO-ISO operates with a regulated flow of moisture free nitrogen gas which removes the moisture released by the coal at 105 °C as per BS 1016-104.2:1991, BS ISO 687:2010 & BS ISO 11722:2013. The MFSO-ASTM operates with a regulated flow of air as per ASTM D3173-11. MFSU is a Universal Minimum free space oven as per above ASTM, ISO & BS test ...
Manufactured by:Sylab Pvt. Ltd. based inHyderabad, INDIA
The VMF/ASTM is a bench mounted furnace specially designed for determination of volatile matter in coal and coke samples as per ASTM ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
Detailed information is available in our dedicated Coal, Coke & Iron Ore Testing Furnaces brochure (please download above). Carbolite Gero has developed a range of coal and coke testing furnaces and ovens for proximate analysis to qualitatively assess or, quantitatively measure, the amount of moisture, ash, volatile matter ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CAF 16/38 is designed to test coal ash fusibility according to BS ISO 540:2008. The CAF 16/38 requires manual observation and recording of the transition points. In addition, a CAF furnace with automated digital image capture and archiving using Windows compatible software, the Coal Ash Fusibility Test Furnaces CAF G5, is ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The VMF is specifically designed for testing the volatile matter of ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
CDHT (Coal Drying High Temperature) and CDLT (Coal Drying Low Temperature) ovens are suitable for drying coal in accordance with the following standards: ASTM D2691 – 01, ASTM D2961 – 01a, ASTM D2961 – 02, ASTM D2961 – 95a, ASTM 3302 / D3302M-10, BS 1016-102:2000, BS 1016-1:1973, BS ISO 13909-1:2001, BS ISO ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The SNF furnace is designed to test the swelling index number of coal in accordance with the following standard test methods. BS 1016-107.1:1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
From its natural development to its processing, coal contains an amount of moisture which needs to be quantified. One method of quantifying moisture in coal is by measuring the weight loss of a sample after drying. The MFS is used for this drying process and has a small heated chamber to provide the lowest practical volume, ie, minimum free space, as required by ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The Carbolite Gero combustion tube furnace has been specifically designed for determining the quantity of carbon, hydrogen and sulphur in the analysis sample of coal and coke using test methods in accordance with the following standards: Standards to test for Carbon, Hydrogen & Sulphur: BS 1016-6 & 7:1977 Methods for analysis and ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CRF/1 CO2 reactivity test furnace complies with the Standard test method for the determination, by a loss in mass method, of the reactivity to carbon dioxide of calcined petroleum coke used in the manufacture of anodes for the production of ...
Manufactured by:Wirsam Scientific & Precision Equipment (Pty) Ltd. based inJohannesburg, SOUTH AFRICA
The instrument is designed and made as per “Test Methods for Calorific Value of coal”, “Test Methods for Calorific Value of Petroleum Products” and “Oxygen Bomb Calorimeter” The heat capacity of the instrument is 14000 15000 J/, and it is suitable to determine calorific value of combustible materials such as petroleum products without water ...
Manufactured by:CRAIC Technologies, Inc. based inSan Dimas, CALIFORNIA (USA)
GeoImage™ uses a camera to quickly and accurately measure the reflectance of vitrinite macerals. GeoImage™ is designed for organic petrographic analysis using Standard Test Methodologies ISO 7404-5 and ASTM D2798. GeoImage™ works by reading the vitrinite reflectance intensity from each pixel of a calibrated camera. In the standard configuration, millions of points can be ...