Refine by
Coliwasa Equipment & Supplies
13 equipment items found
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
Product Code: CW-01 6', 1.5" X 42" Coliwasa, Units/Case: 12. The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to ...
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
Product Code: CW-01 5, 1.5" X 60" Coliwasa, Units/Case: 12. The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer ...
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
Product Code: CW-01 7', 1.5" X 84" Coliwasa, Units/Case: 12. The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to ...
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
1.5" x 42" HDPE Coliwasa used for 55 gallon drums 12 units per case. The Voss SingleSample® Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ...
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
Product Code: CW-01 6.5', 1.5" X 78" Coliwasa, Units/Case: 12. The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to ...
Premium
Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)
Product Code: CW-01, 1.5" X 42" Coliwasa, Units/Case: 12. The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer ...
Manufactured by:Blackburn Sampling, Inc. based inGalesburg, ILLINOIS (USA)
Use Blackburn Coliwasa to take representative samples of hazardous wastes, liquids, slurry-type sludge's and semi-solids from top to bottom of buckets, barrels, tanks or tankers. Also great for Q. A. and process ...
Distributed by:BASCO, Inc based inUniversity Park, ILLINOIS (USA)
Economical, durable Coliwasa is made of see-through polypropylene for superior resistance to chemicals and breakage. Neoprene stoppers with TFE film coating on top and bottom for improved safety, stick resistance, and sample transfer (sampler can serve as a container for non-hazardous samples). ...
Distributed by:BASCO, Inc based inUniversity Park, ILLINOIS (USA)
42"" long samplers have liquid-tight Teflon seal. 7/8"" diameter with tapered bottom, 1/2"" diameter opening. Takes sample to within 1/2"" of drum bottom. Sample capacity 200 ml. Disposable Coliwasa is soda-lime glass, pre-scored for easy disposal. Reusable Coliwasa is unscored borosilicate ...
Distributed by:BASCO, Inc based inUniversity Park, ILLINOIS (USA)
Simple design for rapid sample collection. Lower tube to desired depth. A light tug on cord while raising the unit sets the check valve, trapping the sample inside. Plastic rod inside tube allows sample to be collected at any depth. Dispenses easily into appropriate container. Sampler holds approximately 3 ounces per ...
Manufactured by:Blackburn Sampling, Inc. based inGalesburg, ILLINOIS (USA)
A unique inside/outside squeegee attachment cleans the tube while making the extraction. The ability to squeegee off the inside and outside of a coliwasa prevents excess drippage and mess. It also renders the coliwasa 97% ...
Distributed by:BASCO, Inc based inUniversity Park, ILLINOIS (USA)
Ethanol samplers have a 2"" stick-out on the bottom for ready fill sampling of liquids involved with blending fuels and ethanol production and transfer. These samplers differ from standard coliwasa style samplers in that they have silicone stoppers which are more compatible to ethanol. They are available in 5 lengths of 1"" I.D. polypropylene.Shown ...
Manufactured by:Applied Felts Inc. based inMartinsville, VIRGINIA (USA)
Think of the Rhea as a portable DC 12 volt water pump sampling system that takes the place of a Grab Sampler, a Coliwasa, a Kemmerer Water Sampler, A Betta Water Sampler and a Van Dorn Water Sampler. The Rhea® can pump with its built in peristaltic pump depth to water up to 30 feet and pump to depths up to 200 feet depth to water with the optional 12 volt Abyss water ...