Refine by
Collimation System Equipment & Supplies
40 equipment items found
Manufactured by:RDO Water - a division of RDO Equipment Co. based inEscondido, CALIFORNIA (USA)
Thanks to the finely tuned auto-collimation system, the Topcon line of AT-B autolevels are the ideal device for determining height differentials on busy and noisy job sites. With a completely new small lightweight design, they have excellent visibility of horizontal circle, superior gear ratio for shock and vibration and improved tangents and ...
Manufactured by:Pizzi Instruments S.r.l based inBagno a Ripoli (FI), ITALY
The optical alignment collimator is an instrument produced by Pizzi Instruments and designed especially for monitoring movement at dam crests. The instrument, of notable optical-mechanical characteristics, with an objective lens of 80mm diameter and 60X magnification, allows optical alignment between two points considered fixed, this alignment defines a fixed vertical plane which allows the ...
Manufactured by:Pizzi Instruments S.r.l based inBagno a Ripoli (FI), ITALY
The operating principle of this instrument is very simple. Movement of the movable target carriage is by a motorization system inside the target itself. This system, conveniently connected by 3 wire cable to an appropriate ‘control device’, allows screen movement in the two opposite directions of the horizontal plane; a 3-digit mechanical index (each ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
The Panoramic Gamma Irradiator is designed for the calibration and performance testing of personal dosimeters and compact radiation detectors. Capable of housing up to three non‑collimated gamma sources, this system provides a uniform radiation field ideal for precise dosimetric verification in nuclear facilities and radiation metrology laboratories. The PGI‑03 ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Ceiling Suspension, Mobile, Tube Stand/ U-Arm Manual Collimators. Multilayer, square field, manual collimation system with a lightweight and compact design intended for installation on mobile and stationary X-ray equipment. This device has been designed and manufactured for skeletal investigations and ER applications. ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Single layer, square/rectangular field, automatic collimation system with independent shutter control intended for installation on dental fixed or rotating anode radiological equipment. This device has been designed and manufactured for dental investigations. ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Ceiling Suspension, Remote Control, Tube Stand/ U-Arm Automatic Collimators. Multilayer, square field, automatic collimation system with a lightweight and compact design intended for installation on mobile and stationary X-ray equipment. This device has been designed and manufactured for skeletal investigations and ER applications. ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Multilayer, square field, motorized collimation system intended for installation on stationary X-ray equipment. This device has been designed and manufactured for skeletal and thoracic ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Ceiling Suspension, Tube Stand/ U-Arm Manual Collimators. Multilayer, square field, manual collimation system intended for installation on stationary X-ray equipment. This device has been designed and manufactured for skeletal and thoracic investigations. ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Ceiling Suspension, Tube Stand/ U-Arm Manual Collimators. Multilayer, square field, manual collimation system intended for installation on stationary X-ray equipment. This device has been designed and manufactured for skeletal and thoracic investigations. ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Single layer, square/rectangular field, automatic collimation system with independent shutter control intended for installation on dental radiological equipment. This device has been designed and manufactured for dental ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Option with Asymmetric Shutters. Ceiling Suspension Automatic Collimators. Single layer, square field with 4 independent shutters, automatic collimation system intended for installation on stationary X-ray equipment. This device has been designed and manufactured for skeletal, gastrointestinal, urographic and thoracic ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Fixed C-Arm/ Cardiovascular, Mobile C-Arm/ Mobile Surgery Automatic Collimators. Single layer, square field, automatic collimation system intended for installation on stationary or mobile C-arm equipment in connection with a digital image receptor. This device has been designed and manufactured for skeletal and cardiovascular ...
Manufactured by:Ralco s.r.l based inBiassono (MB), ITALY
Fixed C-Arm/ Cardiovascular, Mobile C-Arm/ Mobile Surgery Automatic Collimators. Single layer, round and elliptic field, automatic collimation system intended for installation in connection with an Image Intensifier mounted on mobile or stationary C-arm equipment. This device has been designed and manufactured for skeletal and cardiovascular ...
Manufactured by:Acteon Group based inMount Laurel, NEW JERSEY (USA)
Extend the fields of the device for orthodontic analysis, improving diagnosis and treatment planning with high-performance image filtering. X-MIND Prime with CEPH’s patented collimation system allows multiple image size selections, including new reduced size modes, ensuring a perfect assessment of the region of interest at the lowest dose. Choose the ...
Manufactured by:Swissray Medical AG based inHochdorf, SWITZERLAND
The completely motorized ddRAura U is quickly and effortlessly positioned with Swissray’s APS – Automatic positioning system via handheld remote control, optional wireless foot pedals or ddRAura workstation control. The ddRAura’s tube mounted touchscreen provides control generator, collimator, system position, patient procedure ...
Manufactured by:Bowman based inSchaumburg, ILLINOIS (USA)
The O Series combines high performance with a small x-ray spot size. This is made possible by the poly-capillary focusing optics system that replaces the collimator assembly installed in standard Bowman systems. The optics are designed to focus the x-rays coming from the tube exit window to a very small spot size (80μm FWHM) while retaining ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
This Gamma Irradiator is a metrological system designed to generate a stable, homogeneous collimated gamma beam using a single Co‑60 radionuclide source. Engineered for calibration laboratories, nuclear facilities, and radiation metrology centers, it provides a reliable reference field for verifying gamma dose and dose‑rate measuring instruments. ...
Manufactured by:Varex Imaging Corporation based inSalt Lake City, UTAH (USA)
The Optica™ 10 is a manually operated collimator for integration with mobile and stationary radiography systems. This collimator is standard equipped with a long-life power LED that projects a bright light field on the exposed area. LED brightness and timer are adjustable via an internal USB ...
Distributed by:Nuclear System Co. Ltd. based inBangkok, THAILAND
It is ideal for treating shallow pediatric or brain tumors, where small spot sizes are difficult to achieve. The Adaptive Aperture is a ground breaking low profile Multileaf Collimator (MLC) system specifically designed for pencil beam scanning. The system uses a fully automated adaptive aperture that generates layer-by-layer specific beam ...