Refine by
Applications
- Biomass and Waste to Energy Technology for Food & Agricultural Industry
- Biomass and Waste to Energy Technology for Pulp & Paper Industry
- Biomass and Waste to Energy Technology for Waste Management Industry
- Biomass and Waste to Energy Technology for Wood Industry
- Biomass and Waste to Energy Technology for Cement Production Industry
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for furnace atmosphere control
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for oxygen measurement
Combustion System Control Equipment & Supplies
68 equipment items found
Manufactured by:Prei Group based inAlzate Brianza, ITALY
From the cooperation with Ascon Tecnologic the combustion control system (SCC) eCOMB was born. This main application of this analysis system is to monitoring the emission and control the combustion data of boilers powered by methane. It also performs the calculations of efficiency and excess of ...
Manufactured by:SteEnova GmbH based inFreising, GERMANY
For industrial power plants, which burns production waste together with other fuels, the combustion zone has to be designed carefully regarding the bandwidth of the heating values of the combustible materials, to avoid restrictions in profitability in the future. The potential of the variability of the endzone of the freeboard in OptiCOM-Boilers can only be used ...
Manufactured by:FER Strumenti Srl based inSeregno, ITALY
Oxygen Measurement, Carbon monoxide extractive measurement with electrochemical cell, Temperature measurement, Semi-extractive approach with mounting directly to the stack, Easy installation, Simplicity of ...
Manufactured by:ClearSign Combustion Corporation based inSeattle, WASHINGTON (USA)
Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, or away from a ...
Manufactured by:Bambeck Systems based inSanta Ana, CALIFORNIA (USA)
Stoichiometric Combustion Control creates a condition in the boiler where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the furnace section of the boiler and CO is formed instead of CO2. This is also the basis of low excess air ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
Manufactured by:Bambeck Systems based inSanta Ana, CALIFORNIA (USA)
Stoichiometric Combustion Control creates a condition in the process heater where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the radiant section of the heater and CO is formed instead of CO2. This is also the basis of low ...
Manufactured by:ACL Combustion Inc. based inMoore, OKLAHOMA (USA)
The ACL Forced Draft CSC400-FD Combustion Safety Controller is a leading edge burner management system which provides burner ignition and air/fuel ratio control for forced draft burner applications. It monitors three separate thermocouple inputs that can be used for temperature control in process applications ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
TDL monitor for in-situ non-invasive measurement of NH3 & H2O, HCl & H2O, HF as well as low or high concentrations of CO and O2 in process or CEMS applications. The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up ...
Manufactured by:Fireye Inc. based inDerry, NEW HAMPSHIRE (USA)
The Nexus® NXF4000 model offers integrated burner management with an electronic parallel positioning and O2 trim combustion control system. The Fireye NXF4000 is an advanced burner management controller with internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to 4 servos ...
Manufactured by:ComEnCo Systems Inc. based inRichmond Hill, ONTARIO (CANADA)
ComEnCo manufactures direct and indirect air heaters heating fresh air or process air for industrial dryers. A burner management system and a combustion control system are used to maintain low nitrogen oxide and carbon dioxide emissions which are major environmental ...
Manufactured by:Wabash Power Equipment Company based inWheeling, ILLINOIS (USA)
800 HP Cleaver Brooks firetube boiler generating up to 27,600 lbs of steam an hour. Single Point Feedwater and Combustion control system for easy to use management platform. Deaerator and chemical feed tanks to ensure the highest quality feedwater. Entrance doors and panels at several points around the container for ease of access. Maximum ...
Manufactured by:HiTemp Tech Corporation based inRingoes, NEW JERSEY (USA)
HiTemp Process Furnace Systems are designed and manufactured for low and high BTU solids using a combination of temperature and destructive distillation to breakdown the combustibles. An afterburner system separately controls adding secondary combustion air to raise the temperature of the exhaust gases to the ...
Manufactured by:Swebo Bioenergy based inBoden, SWEDEN
The SWEBO S-series comprises a number of different smart storage tank modules, which are each driven by hydraulic scrapers, to allow the least expensive storage tank (S6) to be constructed in kit form, measuring 2.8 x 1.2 metres (max. 2 wide) and with 2 different wall heights. The storage tank is supplied unassembled, for an inexpensive but high quality solution. The storage tank can handle loads ...
Manufactured by:Stelter & Brinck, Ltd based inHarrison, OHIO (USA)
Typically smaller, more customizable than our IAH-R units, our non-recirculating indirect fired heaters are designed to heat your process stream, free from the by-products of combustion. Stelter & Brinck’s non-recirculating indirect fired air heaters offer a low capital cost, medium efficiency solution to indirect heating applications. IAH-NR units are furnished ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a ...
Manufactured by:Dryair based inSt. Brieux, SASKATCHEWAN (CANADA)
Conversion from one fuel source to another can be accomplished in as little as 15 minutes. Includes unique “Combustion Environment Control” system which ensures efficient and reliable burner operation in all conditions. Compact and portable design for easy positioning on the work site. All system operation is ...
Manufactured by:Perennial Energy based inWest Plains, MONTANA (USA)
Perennial Energy specializes in the design and manufacturing of biogas processing systems and equipment, focusing on Utility Flare Systems and standalone Utility Flares. These flares feature a turndown ratio of up to 100:1, with an absolute minimum of 10 SCFM, optimized for landfill or digester gas destruction. PEI's Utility Flares excel in high-efficiency ...