Refine by
Applications
- Gas Turbine Generator for Oil & Gas Solution
- Gas Turbine Generator for Industrial & Commercial Solution
- Gas Turbine Generator for Waste to Energy Solution
- Gas Turbine Generator for Marine
- Combustion Technology for Sulphur & Sulphur Acid
- Combustion Technology for Alternative Combustibles
- Combustion Technology for Liquid Residue Incineration
- Combustion Technology for Exhaust Gas and Air Combustion
- Conventional Power Generation Systems for Carbon-Negative Energy (CNE)
- Conventional Power Generation Systems for Fast Response, Peaking Power Plant/Black-Start Power Generator
- Conventional Power Generation Systems for Unlocking Resource Value
- Conventional Power Generation Systems for Zero Emissions Power Generation
- Combustion Technology for Hot Gas Production
- LowNOx Systems for Nitrogenous Fuels
- Solution for Ultrafast Laser Spectroscopy / Imaging
- Solution for High-Speed 4D Imaging
- Industrial Gas Flow Meters for Aluminum & Steel Production
- Industrial Gas Flow Meters for Chemical Industry
- Industrial Gas Flow Meters for Pulp & Paper Industry
- Torrefaction Technology for Co-Firing of Biomass
- Torrefaction Technology for Decentralized Heating and CHPs
- Torrefaction Technology for Biobased Fuels & Chemicals
- Torrefaction Technology for Steel and Metal Production
- Waste Gas Incineration for the Air Pollution Treatment Industry
- Solid Waste Incineration for the Municipal Waste Industry
- VOC and HAP Abatement
Combustor Equipment & Supplies
154 equipment items found
Premium
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
Manufactured by:Thruster Technologies based inChattanooga, TENNESSEE (USA)
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
Manufactured by:Thruster Technologies based inChattanooga, TENNESSEE (USA)
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
Manufactured by:ACL Combustion Inc. based inMoore, OKLAHOMA (USA)
ACL combustors are a patented high volume combustion device with up to 1,800,000 scf/d (high pressure) or 100,000 scf/d (low pressure) flow rate capacity for destroying fugitive emissions: tank, casing, or vent gas vapors. Higher volume high pressure combustion can be achieved with taller than standard ...
Manufactured by:Thruster Technologies based inChattanooga, TENNESSEE (USA)
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
Manufactured by:EnviroExperts Italia Srl based inCalolziocorte, ITALY
A side of the diagram of a catalytic combustor in the series 'Skorpio'. Deparia Engineering has considerable experience in the design and manufacture of catalytic combustors and ...
Manufactured by:Thruster Technologies based inChattanooga, TENNESSEE (USA)
Have a difficult project? Let our experienced engineering staff custom design your next combustor project. Whether its a simple combustor with Inlet Air Arrestors, or a full custom electronics system, we are here to help make sure your application is a ...
Manufactured by:Process Combustion Corporation (PCC) based inPittsburgh, PENNSYLVANIA (USA)
Reduce air pollution emissions from a variety of industrial processes. Process Combustion’s vapor combustors are a simple, effective means of processing gaseous streams that cannot be emitted to the atmosphere. In addition to being a cost-conscious solution, our equipment is designed to maximize fuel efficiency while offering operational flexibility in terms of processing ...
Manufactured by:Clean Energy Systems, Inc. (CES) based inRancho Cordova, CALIFORNIA (USA)
The Clean Energy Systems reheat combustor, or reheater, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas turbines and even beyond. The principles behind the reheater are essentially the same as applied in the CES drive gas generator but exchanging water ...
Manufactured by:Swebo Bioenergy based inBoden, SWEDEN
The SWEBO BioTherm is the result of a research and development project lasting many years and, like so many of our other products, it has made a significant impression on the market. Among other fuels, the burner can burn challenging fuels such as horse and chicken manure, extremely moist chips (with a moisture content of up to 61%), offal, etc. In other words, it is a genuine ...
Manufactured by:EnviroExperts Italia Srl based inCalolziocorte, ITALY
A good alternative to catalytic combustion, when the concentrations of volatile organic compounds in the flue gas fall in a range between 2% and 50% of the lower explosion limit and the temperature of the effluent to be purified not exceed 200 ° C, is represented by thermal combustion with regenerative heat recovery. The Regenerative Combustor developed by Deparia and defined ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the vapors is not a viable ...
Manufactured by:Clear Rush Co. based inSundre, ALBERTA (CANADA)
The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or ...
Manufactured by:Process Combustion Corporation (PCC) based inPittsburgh, PENNSYLVANIA (USA)
PCC’s high intensity, multifuel, low NOx burners, and combustors have set the standard for quality and reliability. While available in a wide range of standard sizes, we can custom engineer them to meet your unique needs. If desired, we can offer turnkey construction and project management to handle the job from start to ...
Manufactured by:Plantec Asia Pacific Pte. Ltd. based inSingapore, SINGAPORE
Turning waste into fuel for perfect combustion. SLA Combustion Method – Turning waste into dried solid residues and combustible gas. The Vertical Combustor employs ‘SLA Combustion Method’ invented by Plantec Inc., parent company of Plantec Argonaut Pte. ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
Manufactured by:Williams Patent Crusher & Pulverizer Co., Inc. based inSt. Louis, MISSOURI (USA)
Direct Injection Roller Mills for Limestone Williams pioneered the direct injection of Limestone and fuel for fluid bed boilers In ...
Manufactured by:Drytech International Holdings based inPhoenix, MAURITIUS
Drytech has designed and developed a fluid media combustor (FMCTM) system for the combustion of pea and duff coal in thermal processing systems, these systems have been successfully used in industry as Hot Gas Generators since 1986. This system was developed in early 1980, and the first use of the system was the replacement of an underfeed stoker in an animal feed drying ...
Manufactured by:Frontline Waste based inSouth Florida, FLORIDA (USA)
A containerized, ultra-high temperature, self-fueling proprietary technology to convert post-recycling waste into renewable energy. The Gen-H represents a departure from waste recovery technologies since it is (1) small-scale and mobile, (2) treats more types of waste more efficiently and (3) has zero process ...