Refine by
Compressed Air Technology Equipment & Supplies
42 equipment items found
Manufactured by:Powerphase International based inJupiter, FLORIDA (USA)
The FastLight Storage Engine is an innovative technology designed by Powerphase International for efficient grid-scale renewable energy storage. Utilizing existing gas turbines, this system converts surplus renewable or off-peak energy into compressed air, stored for both short and long-term use. This method significantly reduces the cost and ...
Distributed by:Compressed Gas Technologies Inc. based inWindsor, ONTARIO (CANADA)
Centrifugal Compressors are used mainly for large air separation systems. The centrifugal air compressor, also known as turbo compressors, is a dynamic compressor. Turbo compressors utilize rotating impellers to transfer energy to air. Flow from these compressors is controlled by inlet guide vanes. The vanes control the flow rate as ...
Distributed by:Compressed Gas Technologies Inc. based inWindsor, ONTARIO (CANADA)
Typically used in laboratory applications that require low flow nitrogen and where noise is a factor: Orbital scroll technology utilizes a fixed and orbital scroll to create compression. Atmospheric air enters the compression chamber where the orbiting scroll seals the inlet port. The scroll will then orbit around the fixed ...
Distributed by:Compressed Gas Technologies Inc. based inWindsor, ONTARIO (CANADA)
Typically used in small flow nitrogen applications where noise is not an issue. Reciprocating (or commonly referred to as piston) air compressors are positive displacement units, which means they increase the air pressure by reducing its capacity. Meaning air is taken in and compressed to a much smaller volume in a confined space and increasing this air to elevated pressures. This is accomplished ...
Distributed by:Compressed Gas Technologies Inc. based inWindsor, ONTARIO (CANADA)
Rotary screw air compressors (oil-lubricated) are most commonly used air compressor for medium to high flow nitrogen ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
A scroll compressor uses two interleaving scrolls to compress air. Devices using this technology are known for operating more smoothly, quietly, and reliably than conventional piston compressors. Unlike pistons, the orbiting scroll’s mass can be perfectly counterbalanced, with simple masses, to minimize vibration. ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...
Manufactured by:Dimaco sas based inGela (CL), ITALY
The purpose of pneumatic level switch is signalling that the maximum level of the tank has been reached, only by using compressed air. Technology patented by DIMACO. The parts in contact with the contents of the tank are resistant to ...
Manufactured by:AWAS International GmbH based inWilnsdorf, GERMANY
In doing so, we use the many years of experience of the AWAS group of companies in the manufacture of flotation systems, emulsion splitting systems and neutralization systems as well as the latest scientific findings from our project partners at universities and scientific institutions. The production of the systems (pipeline construction, measurement and control technology, ...
Manufactured by:FireRover, LLC based inFarmington Hills, MICHIGAN (USA)
The enforcer portable CAFS system is a versatile firefighting tool and is easily adapted to many different risk areas. EnforcerOne products offer user-friendly and durable products that utilize compressed air foam technology to produce. The foam structure sticks to horizontal and vertical surfaces providing a vapor barrier between the fuel and ...
Manufactured by:Air Power Products Limited (APPL) based inCambridge, ONTARIO (CANADA)
A Proven Technology That Increases Equipment Reliability. Membrane air drying technology has been proven to make it easier and less expensive to provide pneumatic equipment and instrumentation with clean, dry compressed air. This reliable technology helps ensure that no condensate, oxidation and ...
Manufactured by:Schenck Process UK Ltd. based inGloucestershire, UNITED KINGDOM
Schenck Process Pulse Jet Filters can be used in a wide variety of air filtration applications. There are nine different dust collectors in the Pulse Jet family of filters that provide a wide range of air flows, access positions and air inlet arrangements. All models incorporate the same compressed air cleaning ...
Manufactured by:FS-Elliott based inExport, PENNSYLVANIA (USA)
Introducing the PAP Plus® EH Centrifugal Compressor by FS-Elliott: a pinnacle of versatility and performance in air compression technology. Tailored to meet diverse industrial needs, the EH model is available in two, three, and four-stage configurations, boasting an impressive flow capacity of up to 695 m³/min or 24,500 ...
Manufactured by:FS-Elliott based inExport, PENNSYLVANIA (USA)
Introducing the PAP Plus® BH Centrifugal Compressor by FS-Elliott: a pinnacle of reliability and efficiency in air compression technology. Engineered for versatility, the BH model offers one-, two-, and three-stage configurations, ensuring tailored performance to meet diverse operational needs. With an impressive flow capacity of up to ...
Manufactured by:FS-Elliott based inExport, PENNSYLVANIA (USA)
Introducing the PAP Plus® DH Centrifugal Compressor by FS-Elliott: an epitome of power and reliability in air compression technology. Engineered for versatility, the DH model offers one-, two-, and three-stage configurations to meet a wide array of industrial needs. With an impressive flow capacity of up to 525 m³/min or ...
Manufactured by:FS-Elliott based inExport, PENNSYLVANIA (USA)
Introducing the PAP Plus® CH Centrifugal Compressor by FS-Elliott: a powerhouse of efficiency and reliability in air compression technology. With customizable options including one-, two-, and three-stage configurations, the CH model delivers tailored performance to suit a variety of industrial applications. Experience a consistent ...
Manufactured by:DEBUS Druckluft- Vakuumtechnik GmbH based inVelbert, GERMANY
Start saving valuable time by integrating our Chip Extraction Systems directly into your manufacturing processes. Optimize your employees’ work condition with a nearly chip-free environment. A reliable Chip Extraction System additionally minimizes the time-consuming effort of cleaning the machines. That way, under improved circumstances, work will become easier and more ...
Manufactured by:Leman Instruments based inGenève, SWITZERLAND
LEMAN-Instruments designed the AERO30L product line of Dry Air Generator modules, to fit almost any type of application which needs very dry AIR close to the consumer in the laboratory environment. Based on the field proven Pressure Swing Adsorption (PSA) technology, compressed Air is filtered from particulates ...
Manufactured by:Beijing Beneair Technology Co., Ltd based inBeijing, CHINA
Industrial portable air compressors provide essential utility in various sectors by delivering high-performance air compression technology in a compact, mobile format. Engineered to cater to diverse applications across construction, mining, agriculture, and more, these compressors are designed to be robust and reliable. Their ...
Manufactured by:Quality Air Management a Division of O2 Environmental Technologies Inc. based inChapel Hill, NORTH CAROLINA (USA)
Our ULTRA-FLOW Dust Collector is designed for smaller applications but still use our advanced compressed-air, self-cleaning technology. Our top of the line dust collectors can filter out sub-micron sized dust particles in continuous operating mode and our sealed mechanisms and easy access doors make maintenance as simple as possible. ...