Refine by
Concrete Testing System Equipment & Supplies
38 equipment items found
Manufactured by:Germann Instruments based inCopenhagen, DENMARK
The CAPO-TEST system is designed to provide accurate estimates of the in-place compressive strength of concrete in existing structures using the pullout test method conforming to ASTM C900, BS 1881:207, and EN 12504-3 standards. The process involves grinding the test surface, drilling an 18.4 mm hole, routing a ...
Premium
Manufactured by:Challenge Technology based inSpringdale, ARKANSAS (USA)
A computer controlled, automated, concrete thermal expansion testing ...
Manufactured by:Milestone Instruments based inNager Delhi, INDIA
These moulds are made of cast iron/M.S and are supplied complete with base plate for conducting the flexural strength test of ...
Manufactured by:EIE Instruments Private Limited based inDaskroi, INDIA
For Water absorption and specific gravity test of aggregates. As per EN 12390-7, BS 1881:114, IS:2386 (Part III),ASTM C127 and C128: AASHTO T 85 and T ...
Manufactured by:Tramex Ltd. based inKilmacanogue, IRELAND
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal foruse by Flood & Water Damage Restoration and Indoor Air Quality professionals. The ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
High Stability. Max vertical daylight: 334.5 mm. Horizontal daylight between columns: 272 mm. Compression platens: Ø 287x60 mm. Calibration accuracy: class 1. Max. ram travel 60 mm approx.. High stiffness and heavy weight 4 columns frame (german-style). Power supply: 230V 1ph 50Hz 750W. Dimensions: 750x450x1500 mm approx.. Weight: 1200...1250 ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
High Stability Max vertical daylight: 590 mm Horizontal daylight between columns: 340 mm Compression platens: Ø 287x60 mm Calibration accuracy: class 1 Max. ram travel 60 mm approx. High stiffness and heavy weight 4 columns frame (german-style) Power supply (motorized models): 230V 1ph 50Hz 750W Dimensions: 1200x900x1900 mm approx. Weight: 2800...2900 ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
High Stability. Max vertical daylight: 334.5 mm. Horizontal daylight between columns: 260 mm. Compression platens: dia. 287x60 mm. Calibration accuracy: class 1. Max. ram travel 60 mm approx. High stiffness and heavy weight 4 columns frame (german-style). Power supply: 230V 1ph 50Hz 750W. Dimensions: 690x400x1400 mm approx. Weight: 850...920 ...
Manufactured by:Serve Real Instruments Co., Ltd based inWuxi, CHINA
The rapid freeze thaw chamber is used to test the Antifreeze performance of concrete, the antifreeze means the concrete specimen Anti-destructive ability subject to repeated freeze and thaw activity. It’s kind of very important concrete durability test equipment. ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
High Stability. Compression platens: Ø 316x60 mm . Hydraulic pressure: 360 bar max.. Horizontal daylight between columns: 321-345 m. Max. vertical daylight: 411 mm. Max. ram travel 100 mm approx.. High stiffness and heavy weight 4 columns frame: 0.3 mm at max. load (german-style). Safety guards to CE Directive: Class "1". Frame size 3000 kN: 725x710x1570 mm. Frame size 5000 kN: ...
Manufactured by:Rupson Enterprises based inDelhi, INDIA
The top grade Capping Set (Vertical) is provided with complete quality conformation to the standards of IS: 516 1959, and BS 1881-120. It is commonly used to cap the specimens of the compression cylinder. The apparatus is suitable for field use as well as laboratory use. This apparatus caps specimens with a parallel plane face. The vertical capping set with a cylinder length of 150 mm x 300 mm, ...
Manufactured by:Zeal International based inNew Delhi, INDIA
The instrument is used for workability as well as consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the ...
Manufactured by:ELE International based inLeighton Buzzard, UNITED KINGDOM
Air Entrainment Meter B Type Complete with Carrying Case. Supplied with Aluminium Tamping Bar. The proper control of entrained air in concrete is recognized as one of the most important functions in modern concrete manufacture. For the concrete engineer, the ELE Precision Air Entrainment Meter offers an instrument for the testing and designing of concrete mixes. The instrument is designed so that ...
Manufactured by:ELVEM based inAthens, GREECE
Specifications: Electronic Thermostat: Yes. Digital temperature gauge: Yes. Stainless steel construction (inside-outside) 304-18/8: No. External Material: Galvanized steel. Interior Material: Galvanized steel. Overheat control: Yes. Shelves: 0. Supply voltage: ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
Suitable for cylinders up to 160x320 mm and cubes up to 150 mm side. It has the possibility to be provided with a hand operated system to apply the load. In that case, one and two gauge load measuring systems are ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
Similar to the 1300kN, this version improved the maximum load capacity, maintaining the other ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
Manufactured by:Matest S.p.A. based inArcore, ITALY
This machine is suitable for cylinders up to 160x320 mm and cubes up to 150 mm side. Three systems are available with this load capacity, differing from each other by the inner free space in which place the sample. It can be provided with all the MATEST load measuring ...
Manufactured by:Zhuozhou Tianpeng based inZhuozhou city, CHINA
SYE Series hydraulic compression testing machine is used for the compression test of concrete and other construction materials, manual load, digital display the value of pressure and ratio of loading. It can save and print the test result directly by the controller. It also can be equipped with computer to show the load curve and process the date. ...
Manufactured by:Fujian Yete Industry Co., Ltd. based inMinhou County, Fuzhou, CHINA
Polymer concrete sump is manufactured to the same width as the linear channel systems so they can be installed along selected sections of the lineal run. The sump can also be used to pick up other small amounts of water from other areas of your site having many inlet and outlet options to be tapped into. The sumps can be entered from either end of our channel system or from a side position when ...