Refine by
Continuous Level Meter Equipment & Supplies
10 equipment items found
Manufactured by:Delta-Phase Electronics Inc. based inSanta Ana, CALIFORNIA (USA)
RF Admittance/Capacitance is by far the most versatile technologies for continuous level measurement. The RFL-200 Series system can measure level of liquids, slurries, interface and granular in tanks by using special circuit to ignore material build-up on probe. There are no moving parts to wear, plug, or jam. There is only a single tank penetration, usually at the top of the tank above the ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
For continuos level measurement of liquid and bulk-solid materials. Direct mounting into containers, vessels, basins, reservoirs, etc. Possibility of linear measurements even in non-conductive and differently shaped containers. Simple sensitivity setting by means of magnetic pen. LED state and function indication. Wide choice of electric connection via connectors, cable glands or protective ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
For continuous non-contact level measurement. FMCW antenna radar level gauge with a range of up to 20 m. Teaching function to suppress false reflections. Display of measured values on matrix OLED or LCD display. Current output - 4 ... 20 mA, HART® communication. Manual or remote adjustment. Measurement independent of temperature and pressure of the atmosphere above the surface. Possibility to ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
For continuous non-contact level measurement. For continuous level measurement of liquids (even if polluted), paste and mash materials in open or closed vessels, open channels and sumps. Configuration and adjustment of min. and max. measuring range by two buttons. Current (4 ... 20 mA) or voltage (0 ... 10 V) output. LED state indication. Easy and quick connecting by connector. Xi version for ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
For continuous level measurement of liquid and bulk-solid materials. Direct mounting into containers, silos, basins, vessels, reservoirs, etc. Easy and quick connecting by connector. Continuous adjustment of initial capacity. Current (4 ... 20 mA) or voltage (0 ... 10 V) output. Removable electronic module. Material of housing and rod electrodes from stainless steel. Xi, XiT versions for usage in ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
Designed for reliable level measurement of various liquids. Non-contact antenna radar level meter. Measuring range up to 8 m or up to 20 m. Variable installation thanks to the possibility of connection via bottom or top thread. Intelligent numerical signal processing with false reflection elimination. Connection via two-wire cable. Choice of standard cable gland or protective hose gland. Current ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
For continuous non-contact level measurement of liquid, pasty and bulk-solid materials. Universal use, direct mounting into tanks, vessels, containers, sumps, etc. Instant view of measured values on OLED or LCD display. Advanced signal processing with elimination of false reflections. Easy adjustment even without measured material. Current or data output - 4 ... 20 mA, HART®, RS-485 ...
Manufactured by:Dinel, s.r.o. based inZlín, CZECH REPUBLIC
New intelligent capacitive level meter with display, HART communication and diagnostics. For continuous level measurement of liquids and bulk solids in all industrial branches. A wide range of applications, direct installation in storage silos, hoppers, vessels, sumps, etc. ...
Manufactured by:Mecon GmbH based inKerpen, GERMANY
he MENKAR KK-series level indicators are suitable for continuous measurement and monitoring of the level of a liquid in any open or closed containers. The liquid level to be monitored in the container is transferred by a float at a 1:1 ratio as an analogue value. The measurement is independent of the operating pressure. The devices are characterised by the robust structure, fault-free use and ...
Manufactured by:Solid Applied Technologies Ltd. (SOLIDAT) based inMandeville, LOUISIANA (USA)
Gauger485 is a level sensor solution for applications interfacing external devices such as a radio modem, GPS receiver, multiple relay controller, WiFi converter, computing devices and many more. Gauger485 level sensors can also communicate with each other or with GaugerGSM for applications such as differential level measurement or adjacent multiple tank level measurements. The use of serial ...