Refine by
Applications
- Structural Monitoring Solutions for Bridge Monitoring
- Structural Monitoring Solutions for Fracture Critical Monitoring
- Structural Monitoring Solutions for Wireless Bridge Bearing/Expansion Joint Monitoring
- Structural Monitoring Solutions for Overweight Monitoring
- Finite Element Method Model Verification for Bridges, Buildings and other Structures
- Structural Monitoring Solutions for Barge and Vehicle Collision Detection on Bridges
- Structural Monitoring Solutions for Remote Monitoring of Bridges under Extreme Permit Loads or Superloads
- Structural Monitoring Solutions for Tunnel Monitoring
- Structural Monitoring Solutions for Structural Health Monitoring
- Structural Monitoring Solutions for Others
Crack Meter Equipment & Supplies
12 equipment items found
Manufactured by:Geosense Ltd based inSuffolk, UNITED KINGDOM
VWCM-4000 crack meters are used to measure movement across surface cracks and joints in concrete, rock, soil and structures. They consist of a sensor outer body tube and an inner free-sliding rod which is connected at the internal end to a vibrating wire sensor by a spring. At the sensor end of the outer body and the external end of the rod ...
Manufactured by:Resensys, LLC based inCollege Park, MARYLAND (USA)
Displacement / Crack Meter SenSpot provides an easy to install, scalable solution for distributed structural integrity monitoring. Resensys SenSpot technology offers a high performance method for large-scale sensing, wireless synchronization, and ultra-energy efficient wireless communication. ...
Manufactured by:NDT INSTRUMENTS PTE LTD based in, SINGAPORE
Determination of depth and orientation of surface cracks: Our new crack depth gauge RMG 4015 measures crack depths on workpieces of iron, ferrous and austenitic steels and can also be used for cracks in copper, brass, aluminium and other non-ferrous metals. For the measurement of oblique cracks a special oblique cracks probe is ...
Manufactured by:Geosense Ltd based inSuffolk, UNITED KINGDOM
The Vibrating Wire Jointmeter is used to monitor joints of mass concrete structures. The instrument consists of two parts, a socket and the main body with a waterproof vibrating wire-sensing gauge. During construction of the structure, the socket is secured to the form and embedded into a lift of the block to be constructed. After removal of the form, and prior to concreting of adjacent block, ...
Manufactured by:Systel Instrumentation Service Pvt. Ltd. based inLucknow, INDIA
Displacement Transducer is used to measure linear displacements in borehole extensometers, Joint Meters or crack meters. It is ideally suited for applications involving transmission of electronic signals over long distances where other types of transducers based on resistance strain gages or potentiometers cannot be used. The linear displacement ...
Manufactured by:EWS Australia based inPerth, AUSTRALIA
The EWS VWT (Vibrating Wire Telemetry) presents a versatile multi-channel option, multi-communication enabled IoT device designed specifically for remote Geotechnical and Structural monitoring applications. Connect to any Vibrating Wire sensor such as VWP’s, Strain Gauges and Crack Meters, and transmit data from anywhere utilising either 4GLTE or Satellite ...
Manufactured by:Systel Instrumentation Service Pvt. Ltd. based inLucknow, INDIA
Model SIS -120 Crackmeter are used to measure movements across surface cracks or joints in structures, concrete or rock. The Crackmeter incorporates vibrating wire sensor with the resonant frequency of vibration of a tensioned steel wire is proportional to the strain or tension in the wire. This fundamental relationship is utilized in a variety of configurations for the measurement of ...
Manufactured by:Novatest S.r.l. based inFalconara Marittima (AN), ITALY
The isplacement transducers commonly used for the automatic and continuous acquisition of measurements during structural monitoring or load tests. Completely made of stainless steel, they can be equipped with eyelets for wall fixing or with spring testator for load tests with suitable support bracket and telescopic stand. Available with different measurement ...
Manufactured by:Ackcio based inSingapore, SINGAPORE
Supports 1 sensor; (1 vibrating wire channel, 1 pulse counter, and 1 thermistor ...
Manufactured by:Ackcio based inSingapore, SINGAPORE
Supports 8 sensors; (8 vibrating wire channels and 8 thermistor ...
Manufactured by:Pizzi Instruments S.r.l based inBagno a Ripoli (FI), ITALY
Long-stroke vibrating wire extensometers, commonly called crackmeters, are used to measure the surface movements of structural cracks and joints, rock movements and ground deformations. They consist of a cylindrical body in stainless steel that houses the vibrating wire transducer and a sliding rod connected to the transducer itself through a spring. The two final parts of the instrument are ...
Manufactured by:Move Solutions based inMilano, ITALY
Our Single Channel Node is a wireless data logger that makes geotechnical probes suited for LoRaWAN wireless communication. Each node supports one technical probe and the probe's internal NTC (when present). The Single Channel Node can be configured on our Move Cloud Platform: you can set different parameters remotely and monitor the data collected at any time. This new Node comes with increased ...