Refine by
Crop Lifter Equipment & Supplies
26 equipment items found
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
This installation kit contains a specially modified adjustment block (C block) and the required hardware to allow the use of the popular 8B crop lifter on the John Deere 600 series flex head grain platforms (620F, 622F, 622R, 625F, 625R, 630F, 630R, 635F, 635FD, 640FD). The kit is a direct, bolt-on replacement for new and existing 8B crop ...
Manufactured by:Fix Enterprises based inMusk via Daylesford, AUSTRALIA
When farming without herbicides it is of paramount importance to have a clean seedbed to sow in to. For effective weed control the cultured plants must always be larger than the weeds. This is why it is extremely important to germinate the weeds and kill the weeds before sowing or even transplanting. It is also very important to understand the growing habits of all the weeds present, their ...
Manufactured by:Dutch Industries based inPilot Butte, SASKATCHEWAN (CANADA)
Crop Lifters that will Improve Speed & Accelerate Harvest With Minimal Cost! Consistent and uniform comb-like action goes to ground level seeds and lifts for faster and easier cutting action, giving you less crop loss. It’s bullet-shaped holder slides over the tip of the guard and is easily bolted into place using the existing guard ...
Manufactured by:Amadas Industries based inSuffolk, VIRGINIA (USA)
The AMADAS Crop Lifter / Conditioner brings an innovative new concept to lifting and conditioning peanuts and other crops. The gentle action of our advanced design allows the windrows to be lifted and replaced without destroying the ...
Manufactured by:Flexxifinger QD Industries Inc. based inAssiniboia, SASKATCHEWAN (CANADA)
The Flexxifinger® Pulse Crop Lifter™ was originally designed for straight combining in desiccated crops like peas, lentils and edible beans where cutting close to the ground is required. The lifter rail hugs the guard and the replaceable nylon finger is held in an adjustable receptor, allowing the combine operator to ...
Manufactured by:Flexxifinger QD Industries Inc. based inAssiniboia, SASKATCHEWAN (CANADA)
The FlexxiFloat™ 100 crop lifter combines the flexibility of the FlexxiFloat™ series with the gentle lift of a nylon finger. The spring pivot attached to the rail allows the lifter to flex in varying ground conditions, while the nylon finger provides a gentle lift to the crop. The lifter and finger ...
Manufactured by:Flexxifinger QD Industries Inc. based inAssiniboia, SASKATCHEWAN (CANADA)
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. ...
Manufactured by:Flexxifinger QD Industries Inc. based inAssiniboia, SASKATCHEWAN (CANADA)
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, while ...
Manufactured by:Flexxifinger QD Industries Inc. based inAssiniboia, SASKATCHEWAN (CANADA)
The Flexxifinger® Heavy Duty Crop Lifter™ is for harvesting a variety of different crops including pulses, cereals, rice, oils, forage and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held by an adjustable receptor, allowing the combine operator to fine-tune ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
The 4H crop lifter (also known as pick up guard) fits windrowers and pea harvesters, as well as selected floating cutterbars used on combines. This sturdy ductile iron crop lifter is equipped with a set screw height adjustment and non-clogging spring action joint. ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
The 4B is a rugged, non-adjustable crop lifter (also known as pick up guard) used in demanding low cutting applications. It features spring loaded action and a nested receiver pocket for the sickle guard providing the ultimate in solid mounting. The 4B crop lifter is constructed of high strength ductile iron for durability and ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
The 8A is a fully adjustable crop lifter (also known as pick up guard) used on all windrowers and combines with fixed, floating, or flexible cutterbars that tilt downward. The 8A crop lifter is constructed of high strength ductile iron for durability and long service life. Plated grade 8 fasteners are used for high strength and ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
The 4S is a fully adjustable crop lifter (also known as pick up guard) designed to fit combine floating cutterbars with 1½" cut stub guards. It is equipped with a set screw height adjustment, non-clogging spring action joint, and is double-bolted to the cutterbar. 4S crop lifters are constructed of ductile iron for ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
This spacer kit contains a specially designed spacer and the required hardware to allow the use of the 4B, 4H, 8A, and 8B crop lifters on the following cutterbar platforms while utilizing the factory poly skid shoes: MacDon headers to fit 973, D50, D60, D65, FD70, FD75, CA25, FD1, D1, FM100. Case IH headers to fit 2152, 2052, 2142, 2162, 2062. New Holland headers ...
Distributed by:Industriehof Scherenbostel / Heinrich Rodenbostel GmbH based inWedemark, GERMANY
Beet Lifter Shares, Row Cutter Hooks, Crops ...
Manufactured by:Gaterman Manufacturing Co., Inc based inManitowoc, WISCONSIN (USA)
This installation kit contains a specially modified adjustment block (C block) and the required hardware to allow the use of the popular 8B crop lifter on Schumacher SCH Easy Cut II cutterbars equipped with 132mm and 147mm sickle guards used on various cutting platforms. The kit is a direct, bolt-on replacement for new and existing 8B crop ...
Manufactured by:Gebr. Schumacher GmbH based inEichelhardt, GERMANY
The new ASK crop lifter has new optical characteristics. And lasts longer. Because the gently curved bottom runner takes the pressure off the riveting at the mounting modul. Therewith the wear of the first fixation rivet is significantly reduced. Damage caused by torn off crop lifters is minimized and in addition the guidance of ...
Distributed by:Huber Ag Equipment Ltd based inCoronation, ALBERTA (CANADA)
Huber Ag Equipment is a dealer for E-Kay Enterprises. E-Kay Enterprises are a quality manufacturer of Augers, Auger Accessories, Crop Dividers, Crop ...
Manufactured by:CLAAS KGaA mbH based inHarsewinkel, GERMANY
TATA engine (BS-III emissions standard) with 76 HP and plenty of torque in reserve. Available in 2.60 m cutterbar and 3.20 m cutterbar with crop lifters. Long service intervals, easy servicing. High-quality fibre canopy for maximum operator ...
Manufactured by:Key Dollar Cab, LLC based inPortland, OREGON (USA)
Durability 1/2" Tempered Glass in all Windows. 100% Stainless Steel Construction. Compact 81" Overall Height (w/21.5R16 Tires). Narrow Tapered Width (28" at top) Optimized Shape for Minimal Crop Impact. Options Limb Lifters, Fenders & ...