Refine by
Delivery Cycle Equipment & Supplies
27 equipment items found
by:BioTAB Healthcare based inSaint Louis, MISSOURI (USA)
Our Advanced Pneumatic Compression Device (APCD) is clinically proven to be the most effective in-home device to treat lymphatic and venous disorders. The LV PRO and garments offer complete programmability with the fastest delivery cycle time and targeted treatment options tailored to meet patients’ individual needs. ...
Manufactured by:Emec S.r.l based inRieti, ITALY
PRISMA is a metering pump with a diaphragm stepper motor. The position and speed of the diaphragm are controlled by the microprocessor for the entire delivery/suction cycle. PRISMA is equipped with Level Control, Alarms and Stand-by, while working modes include: Constant, Constant with external input, ppm, %, mlq, Pause-Work, Weekly, mA, Pulse, Volt, External ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
Compact single component spraying.Single Component Pneumatic Airless Spray Unit mounted on 2 wheel cart unit. Standard unit is 73:1 ratio and powered by a CoverCat 290 Air Motor. Maximum fluid delivery 232cc/cycle 9.2ltr/min (2.5gpm) @40cycles. Single Gun or Multiple Gun application of Pre-mixed Coatings. The units are capable of spraying a wide range of ...
Manufactured by:Lubecore International Inc. based inCampbellville, ONTARIO (CANADA)
The HP-400 Compact Chief Lubrication System’s compact footprint ensures your small equipment remains well lubricated. Its simple design delivers a precise amount of grease, allowing for consistent delivery with every cycle of the ...
Manufactured by:Norwalk Wastewater Equipment Company (Norweco) based inNorwalk, OHIO (USA)
Norweco's duplex pump unit is pre-engineered for specialized aerobic or anaerobic wastewater pumping needs. The duplex unit is used where high delivery or alternating cycles are required, as in alternately dosing dual tile fields or multi-stage sand filters. Each duplex pumping unit is easily installed with no heavy equipment required for ...
Manufactured by:CoverCat Equipment Ltd. based inStockton-on-Tees, UNITED KINGDOM
CoverCat offer a wide range of Single and Plural Component Spray Equipment, offering a wide range of pressure ratios. The CoverCat 300-73 Pump Unit offers 73:1 Pressure ratio with delivery volume of 4.6ltr/min @ 20 ...
Manufactured by:Liquid Controls, Inc. - a unit of IDEX Corporation based inLake Bluff, ILLINOIS (USA)
The DMS® In-Cab Data Management System is a flexible, industry specific mobile computing platform. The DMS® users with the ability to connect to up to three LectroCount® registers. The DMS® captures and stores transactional data that can be transferred to the office using a USB memory stick or using RF radios or cellular ...
Manufactured by:American CLS, Inc. based inHoneoye, NEW YORK (USA)
We have Standard 24′ Length Cylinders with Optional 30″ and 36″ Lengths. Our Standard 9″ Tall Splitting Head makes quick work of Longer Length Wood. And these machines come fully run and tested. American CLS Builds machines READY TO WORK upon Delivery ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
With over 450 units deployed to more than 40 countries, GE has the largest operating and most experienced OEM F-class fleet in the world. Our 9F gas turbine delivers consistent performance and accommodates a diverse range of fuels, making it great for a variety of combined cycle and CHP ...
Manufactured by:Lanco Pipes and Fittings based inMumbai, INDIA
Lanco Pipes & Fittings supplies smooth bore 70/30 cupro nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These cupro nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the ...
Manufactured by:Plusfab Engineering Solutions based inTianjin City, CHINA
Helical screw piles are steel helical piles installed by screwing in. Equipped with helical blades at the bottom, they firmly grip the soil, providing stable bearing capacity. Installation is quick and requires no large-scale excavation or concrete pouring. They perform excellently in complex geological conditions such as soft soil, wetlands, and frozen soil, exhibiting good pull-out resistance ...
by:Pro-Bac Industries Pty Ltd based inBAYSWATER, AUSTRALIA
The Probac M6 Metering System was developed by Hydrobac to provide an inexpensive yet simple to use dose metering pump. The M6 has excellent control over the amount of product injected and has very accurate timing. The actual dosage may vary slightly over time due to the condition of the squeeze tuba, product being injected, the temperature etc. The system will inject a specific amount of product ...
Manufactured by:Tech Development Inc. (TDI) based inDayton, OHIO (USA)
Boosting Manifold Air Pressure for Engine Starts and Light Load Operation - Cold starts, light loads, and applications where frequent start-stop cycles occur often do not have enough exhaust to create required pressures within the air manifold for starting the engine. When this happens, the result is expensive downtime and significant damage to the engine or turbo chargers. ...
Manufactured by:LiTrue Power Technologies Co., Ltd. based inLuoyang, CHINA
For engineers developing electric motorcycles and hybrid agricultural machinery, finding a power source that perfectly balances high energy capacity with extreme durability is a constant challenge. LiTrue introduces the Long Cycle Life Energy-Type LFP Pouch Battery Cell Series, precision-engineered to bridge this gap. Designed for applications requiring continuous operation, frequent cycling, and ...
Manufactured by:Sany Renewable Energy based inBeijing, CHINA
SANY Renewable Energy has been deeply involved in the field of double-fed generators for over ten years, and has developed phenomenal capabilities in R&D, manufacturing and after-sales service for double-fed ...
Manufactured by:Samoa Industrial based inGijón, SPAIN
PM3 air operated piston pumps. This is a component for a kit. PUMPMASTER 3, 2:1 ratio pneumatic piston grease pump. Instruction book: ...
Manufactured by:Samoa Industrial based inGijón, SPAIN
Very compact and reliable diaphragm pumps for medium to large volume transfer (100 l/min max.), dosing, spraying and dispensing a variety of fluids. Aluminium pumps have an aluminium air motor. Typical applications for these pumps are transferring and dispensing of windshield washer and antifreeze solutions. They can be used as stand-alone pumps for transfer applications or as systems pumps in ...
Manufactured by:Samoa Industrial based inGijón, SPAIN
Very reliable diaphragm aluminium pumps for large volume transfer (250 l/min max.), dispensing and evacuating a variety of fluids. These pumps have an aluminium air motor. Typical applications for these pumps are transferring and dispensing of antifreeze solutions. They can be used as stand-alone pumps for transfer applications or as systems pumps in distribution systems that include hose ...
Manufactured by:Intravision Group AS based inOslo, NORWAY
The GravityFlow™ system is fully automated, controlled environment platform that is tuned towards large scale production of a wide range of medicinal and food ...
Manufactured by:Samoa Industrial based inGijón, SPAIN
PM2 series air operated piston pumps. Double acting air operated low pressure pumps for transferring coolants. Pumps include height adjustable 2” BSP (M) bung adaptor for tank or drum bung mounting. air operated piston pumpss for Fluids accessory: PN 331 110.002, PVC suction tube for 205 l drums. ...