Refine by
Drift Eliminator Equipment & Supplies
220 equipment items found
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Modern re-cooling systems need to consider aspects of the environment and sustainability. For cooling towers this means it is important to reduce the loss of water and emissions. Therefore drift eliminators are used. They are installed above the water distribution and cooling fills and catch the water drops that are carried with the air flow and redirects them ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DRIFdek-IL modular interlocking drift eliminators offer easy installation, self sealing design and excellent droplet separation. The overlapping design makes installation fast and watertight. No caulking or weather stripping is needed between the ...
Manufactured by:Filling Technologies srl based inLissone, ITALY
THE H130 DRIFT ELIMINATOR, with a geometry based upon 2 changes in the discharge airflow direction, is applied principally in situations of vertical airflow but can also be used for crossflow applications: it is constructed from preformed PVC sheets, subsequently made up into ...
Manufactured by:Eurofill Energy & Water srl based inBiassono (MB), ITALY
The Drift130 Drift Eliminator, with a geometry based upon 4 changes in the discharge airflow direction, is applied in situations of vertical airflow : it is constructed from preformed PVC sheets, subsequently made up into panels. The PVC raw material used in its manufacture is both of high quality and suitably coloured to ensure an excellent resistance to ...
Manufactured by:Cooling Tower Products based inPhoenix, ARIZONA (USA)
Extruded P.V.C. Standard O.E.M. Sizes & Custom Sizes. Heavy Duty – Counter Flow. ...
Manufactured by:Amertech Tower Services, LLC. (ATS) based inTampa, FLORIDA (USA)
During the normal operation of a wet cooling tower, a small amount of water (in droplet form) is entrained in the exit air stream. This water is referred to as “drift”. The section of the cooling tower designed to minimize the amount of drift is most commonly known as “drift eliminators” or “mist ...
Manufactured by:Eurofill Energy & Water srl based inBiassono (MB), ITALY
This type of Drift eliminator, with a geometry based upon 2 changes in the discharge airflow direction, is applied principally in situations of vertical airflow but can also be used for crossflow applications: it is constructed from pre-formed PVC sheets, subsequently made up into panels. ...
Manufactured by:Tower Components, Inc.. A subsidary of Evapco Inc. based inTaneytown, MARYLAND (USA)
Opti-Wave drift eliminators have extruded PVC sine wave profiles 50 mm thick with reinforced upper and lower edges. This provides extra stiffness for long spans with minimum deflection. Spacers secure wave sections uniformly at 2-inch increments for increased stability and modules join together with an integral locking feature that holds the assembled module grid ...
Manufactured by:Tower Components, Inc.. A subsidary of Evapco Inc. based inTaneytown, MARYLAND (USA)
The OC-80 is a high efficiency cellular drift eliminator for counter-flow cooling tower applications. The OC-80 is manufactured from rigid, corrugated PVC sheets resistant to UV, rot, fungi, bacteria, organic/inorganic solvents, acids, alkalis, and chemicals normally found in cooling tower ...
Manufactured by:Cooldeck Industries Pvt Ltd based inMumbai, INDIA
CD-S130/146, made out of rigid PVC, is designed to remove maximum entrained drift particles from air stream efficiently, with minimum pressure drop, thereby reducing the fan power ...
Manufactured by:Sara Cooling Tower Co.,LTD, based inChangzhou, CHINA
We are the leading manufacturer of this Cooling Tower Spindle Drift Eliminator. These are the most efficient drift eliminators. These drift eliminators are specifically designed to avoid any water loss that may occur from a cooling tower. As water in cooling tower also carries many chemicals ...
Manufactured by:Refill-Tech Solutions S.r.l. based inArcore (MB), ITALY
DES 130 (Drift Eliminator – S shape - 130 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of ...
Manufactured by:Refill-Tech Solutions S.r.l. based inArcore (MB), ITALY
BLADE (Drift Eliminator – C shape) is a panel-type (but effectively composed of profiles) drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of ...
Manufactured by:Kimre Inc. based inHomestead, FLORIDA (USA)
Drift is water lost from cooling towers as liquid droplets are entrained in the exhaust air. The drift loss is independent of the water lost by evaporation and may be expressed in units of lb/hr or percentage of circulating water flow. Drift eliminators are used to control this drift loss from the ...
Manufactured by:WATCO PTE Ltd based inSingapore, SINGAPORE
For various operational applications, the CentraDeck cooling tower drift eliminator is made of PVC, PP or ABS thermoformed film. Due to the triple angle labyrinth the wet air-stream is efficiently stripped from water in droplet form, reaching < 0.005% of the circulating water volume at < 4.5 m/s airspeed through the eliminator ...
Manufactured by:Sara Cooling Tower Co.,LTD, based inChangzhou, CHINA
We has manufactured this NBD-160 Blade Type Cooling Tower Drift Eliminator. This drift eliminator is utilized to catch large water drops stuck in the cooling water air stream. Drift eliminators stop the process of water dripping and mist escaping from the cooling water. NBD-160 Blade Type Cooling ...
Manufactured by:Vefim S.r.l. based inVerona, ITALY
The drop separators for vertical air flow (SG Series) allow to separate two fluids in a gas stream. The most frequent event is to separate water drops in an air flow. These drop separator panels offer the best performance to date available on the market, from both the point of view of separation efficiency and high mechanical strength. Also the PVC used is top quality and meets the CTI136 ...
Manufactured by:Refill-Tech Solutions S.r.l. based inArcore (MB), ITALY
IL 65 (Inlet Louvers – 65 mm) is a panel-type air inlet louver obtained from the assembly of PVC sheets which have been suitably corrugated by means of ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...