Refine by
Dynamic Penetrometer Equipment & Supplies
44 equipment items found
Manufactured by:APAGEO based inMagny Les Hameaux, FRANCE
The Apafor® 50 is the economic model of the heavy dynamic penetrometer range for penetrometric testing and ramming. It is the ideal machine to start a basic geotechnical activity with a limited budget. Very compact, this penetrometer is also very quick to position, whether in working, transport or storage position, thanks to its folding mast. ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
The Pagani DS-44 is a thick-walled sampler with a piston and it is driven into the ground by hammering. The piston allows to take samples at the depth required. The impact-hammer-driving system minimizes adverse effects such as heating effect, which occurs in sampling with rotation drive ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Dynamic Cone Penetrometer (DCP) was developed primarily as a verification or control penetrometer to check individual foundations during construction where a subsurface investigation has been made utilizing standard split spoon penetration methods, and laboratory shear strength and consolidation tests and analyses have been performed on ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Vertek Smart DCP makes collecting data with the Dynamic Cone Penetrometer easier by automatically counting blows and eliminating the need for tape, pencils, and paper. This innovative new product promises to reduce the manpower required to collect soil behavior data, while also improving accuracy and simplifying field ...
Manufactured by:Humboldt Mfg. Co. based inElgin, ILLINOIS (USA)
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, sub base and sub grades. DCPs are primarily used to determine in-place soil shear strength in road construction with CBR values from less than 0.5 to 100% and bearing values ranging from ...
Manufactured by:Zhuozhou Tianpeng based inZhuozhou city, CHINA
MANUAL DYNAMIC CONE PENETROMETER 16-T0012/E 9 kg hammer, 51cm. fall Standard: AS1289.6.3.2 Model 16-T0012/E FEATURES: • It is tough and robust having been well proven in the field over many years. • Allied to the foregoing, the replaceable Shear Pins enable field repairs to be easily and rapidly carried out. • It is supplied with a reversible ‘Top Nut’, enabling ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Dynamic Cone Penetrometer Drive Hammer ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Say goodbye to the pen and paper and earn more money with Vertek’s Smart DCP kit. Requiring less man power and increasing the number of jobs you can get done, the return on investment (ROI) for the Vertek Smart DCP kit is quick. Users have repeatedly doubled the number of completed tests with increased accuracy when compared to the traditional manual data collection method of using a scale ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The Vertek ADCP’s speed, accuracy, and automation saves you time and money. Offered as a trailer-mounted system, the ADCP is a cost-effective solution for high production dynamic cone penetrometer ...
Manufactured by:Sol Solution based inRIOM Cedex, FRANCE
It is made for compaction control and geotechnical soil investigation. Innovation designed and developed by Sol Solution. DPSH-B standardised penetrometer (NF P ...
Manufactured by:Sol Solution based inRIOM Cedex, FRANCE
It is made for compaction control and geotechnical soil investigation. Innovation designed and developed by Sol Solution. The equipment is easily transportable and allows access to any location: urban or rural environment, wasteland, cellar, trench coating area, inside buildings, ...
Manufactured by:Salem Tool Company based inNorthville, MICHIGAN (USA)
This Stainless-Steel Dual Mass Dynamic Cone Penetrometer Kit measures the shear strength of soil with a CBR value between 0.5-100. It is manufactured in the USA by Salem Tool Company. This tool is a real workhorse that is built to last. It comes with a 37.75"drive rod for a test depth of 36". ...
Manufactured by:Salem Tool Company based inNorthville, MICHIGAN (USA)
This Stainless-Steel Dual Mass Dynamic Cone Penetrometer Kit is the only DCP on the market that strictly adheres to the ASTM D6951/D6951M − 09 requirement of "All joints must be securely tightened including the coupler assembly" This is the only DCP on the market that the drive rod is joined together with a thread to provide a tight fit. ...
Manufactured by:Humboldt Mfg. Co. based inElgin, ILLINOIS (USA)
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, sub base and sub grades. DCPs are primarily used to determine in-place soil shear strength in road construction with CBR values from less than 0.5 to 100% and bearing values ranging from ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
1' Dynamic Cone Penetrometer Drill Rod Point ...
Manufactured by:Salem Tool Company based inNorthville, MICHIGAN (USA)
Single Mass Dynamic Cone Penetrometer kit. Additional Information: Weight: 54 lbs. Dimensions: 6 × 16 × 54 in. 12 month manufacturer warranty. Meets all D6951/D6951M − 09 (Reapproved 2015) and Army Corp of Engineer certifications and ...
Manufactured by:Zhuozhou Tianpeng based inZhuozhou city, CHINA
DUAL MASS DYNAMIC CONE PENETROMETER (DCP) K-100 8kg or 4.6kg hammer, 57.5 cm. fall Standard: ASTM D 6951-03 Model K-100 FEATURES: • This application describes measurement of the penetration rate of the model K-100 DCP(dynamic cone penetrometer)with a single mass or dual-mass. ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
2-1/2' External Dynamic Cone Penetrometer Extension ...