Refine by
Effluent Collection Equipment & Supplies
42 equipment items found
Manufactured by:Hydrocompus technologies inc based inDiemen, NETHERLANDS
Circular clarifiers are designed to remove settled solids from the bottom of the tank as quickly as possible to improve the efficiency of treatment processes. Considerations involving inlet energy dissipation, solids settling characteristics, liquid flow patterns and effluent collection are all part of the design parameters. ...
Manufactured by:Nederman National Conveyors based inCharlotte, NORTH CAROLINA (USA)
Chips passing through the screen report by gravity to a horizontal bowl continuous chip wringer (centrifuge) (CW) where residual cutting fluids are extracted and discharged to effluent collection sump (ES). Dry metal chips are discharged via chute (CC) to a container. The entire system is controlled from master control panel (CP) fitted with a programmable logic ...
Manufactured by:Advent Envirocare Technology Pvt Ltd. based inAhmedabad, INDIA
Small & Medium Enterprises are backbone of manufacturing in India and Government has promoted numerous industrial estates and clusters to promote SMEs. For an individual SME. treatment of effluent is an arduous task as they are most often constrained by space, resources and skill to provide effective treatment to meet the stringent disposal norms. Ministry of Environment ...
Manufactured by:Waterloo Biofilter Systems Inc. based inRockwood, ONTARIO (CANADA)
Biofilter Baskets are rigid and strong, yet still lightweight and easy to transport and maneuver onsite. Treated effluent collects in the bottom of the Biofilter tanks and is pumped to disposal or reuse. Recirculation is used to increase the total amount of nitrogen removed and help moderate ...
Manufactured by:Waterloo Biofilter Systems Inc. based inRockwood, ONTARIO (CANADA)
Compared to Basket Biofilters, Bulk-filled Tanks reduce the overall tankage costs, and can be installed in poured-in-place concrete containers. Treated effluent collects in the bottom of the tanks and is pumped to disposal or reuse. Recirculation is used to increase the amount of total nitrogen removed and help moderate flow rates. Bulk-filled Tanks are fitted ...
Manufactured by:Texmo Pipes and Products Limited based inBurhanpur, INDIA
TEXMO HDPE pipes are best preferred for potable water supply, irrigation schemes, chemicals and edibles transportation, effluent collection and disposal system, submarine and underwater pipe lines, hydro transport system, gas/compressed air system etc. TEXMO HDPE pipes have been preferred over other available resources due to varied salient ...
Manufactured by:Remosa - Recubrimientos y Moldeados s.a. based inNoblejas, SPAIN
The water is separated from the fat by the difference in densities, leading to the separation of the liquid over two phases: the top one with fats and the bottom one with water. The effluent is collected in the intermediate part to prevent the release of ...
Manufactured by:Anua based inGreensboro, NORTH CAROLINA (USA)
Effluent-only collection systems provide an affordable and sustainable sewer option for communities. Moving solids within a wastewater collection system is very costly. The EffluaSTEP collection system is a low-intensity solution for budgeting, installation, and ...
Manufactured by:Glass-Steel, Inc. based inConroe, TEXAS (USA)
Glass-Steel, Inc. manufactures a proprietary system of composite effluent troughs for water collection in the water/wastewater applications. Troughs are typically used in clarifiers (both circular and rectangular), grit collectors, sedimentation basins, thickeners, filter systems, etc. Glass-Steel, ...
Manufactured by:ARM Ltd. based inRugeley, UNITED KINGDOM
Unsaturated vertical flow (VF) systems are essentially the same as the horizontal flow systems in that they comprise a lined excavation. Unlike the horizontal flow reed bed the vertical flow is not constantly flooded but free draining. The effluent is applied in a batch process across the surface of the bed until the surface is flooded. The effluent gradually drains down through the bed with air ...
Manufactured by:Frames based inAlphen aan den Rijn, NETHERLANDS
Crude oil contains water and contaminants that need to be removed. Frames Electrostatic Coalescers ensure adequate separation through competitive solutions. Our coalescers improve the economics of transport, limit the requirements of downstream equipment, and prevent negative effects on downstream refining processes. The separation process generally comprises two principles: dehydration and ...
Manufactured by:Remosa - Recubrimientos y Moldeados s.a. based inNoblejas, SPAIN
The fats separator is an essential component in the treatment of household wastewater that may contain a considerable volume of fats or animal or vegetable origin. Built in accordance with standard NF EN 1825-1. They must be installed in hotels, restaurants, camp sites, schools, etc. ACO Remosa has standard units of up to 5,000 litres, and higher capacities available on ...
Manufactured by:Aqualytical based inLouisville, KENTUCKY (USA)
This Kit comes with any selection of 1 CLAM Disk, tubing and fittings with a 100 ml syringe. This kit makes it easy to extract smaller water volumes such as 1 liter samples with just the small CLAM Disk being sent back to the ...
Manufactured by:Enviro-STEP Technologies Inc based in, QUEBEC (CANADA)
FILTRO-FLEX is a prefabricated intermittent recirculating filter module producing high quality effluent. FILTRO-FLEX is specifically designed for its ease of installation and most importantly the capacity of adding modules easily to increase the site capacity. It makes the FILTRO-FLEX a system that evolves at the same rate of your project. Land developers and any multi-phase projects such as ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Tube conditioner- 230 ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Tube conditioner- 115 ...
Manufactured by:Earthtek, LLC based inBatesville, INDIANA (USA)
EarthTek’svertical cloth media filter is a new advanced fiber cloth media filtration technology for higher flows. The vertical filter has an optimized design featuring high efficiency, cost savings, a small footprint, excellent performance and simple operation and maintenance.It is specially developed for tertiary filtration and removal of suspended solids from treated wastewater. It can ...
Manufactured by:Access Industrial, Inc. based inMississauga, ONTARIO (CANADA)
Weirs in water and wastewater treatment plants are used to regulate the inflow of water into launders or troughs. They control inflow with their elevation. The weirs are available with rectangular and V-shaped notches. Both are used to regulate the flow rate. Access Industrial makes weirs out of FRP. They are supplied as a kit. They come complete with 316 stainless steel anchors, FRP washers and ...
Manufactured by:Hydro Quip, Inc. (HQI) based inSeekonk, MASSACHUSETTS (USA)
Mobile plate clarifier operating inside tank. The Hydro Quip Mobile Plate Clarifier uses inclined plate technology designed specifically for use in mobile treatment tanks (Frac Tanks). Each module is designed for flow rates up to 200 gpm. Several modules can be incorporated for flexibility to handle higher flow rates. The Mobile Plate Clarifier provides side entry into the plate pack creating a ...
Manufactured by:McCrometer, Inc. - Veralto based inHemet, CALIFORNIA (USA)
Straightening vanes to generate optimum flow profiles. Requiring only 1.5 straight pipe diameters upstream and 0-0.5 downstream. Compatible with line sizes 10” – 12”. Epoxy-coated carbon steel body; all stainless ...