Refine by
Ejector Nozzle Equipment & Supplies
26 equipment items found
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Ejector Nozzles are suitable for cleaning water-bearing pipes only. The unique arrangement of the nozzle inserts results in the “soft“ cleaning effect, which makes the Ejector Nozzles suitable for cleaning older sewer networks. This nozzle uses the water flowing within the sewer to ...
Manufactured by:Venacontra based inKuopio, FINLAND
Venacontra Ejector Diluter (VC-ED) is designed to be used in aerosol sampling when efficient and rapid mixing is needed. It is especially suitable to be used as secondary diluters as it stabilizes the flow rates. It offers moderate dilution ratios with high sample flows. Special attention has been payed for designing of the ejector nozzle, which ...
Manufactured by:Reagen LLC based inSan Diego, CALIFORNIA (USA)
Contact Angela: [email protected] 1 The nozzle ejector can launch 8 nozzle, high efficiency 2 Applicable to the standard 96 microplate 3 The liquid head can rotate 360 degrees, to facilitate pipetting 4 each nozzle connector has a piston device independent, make the maintenance easy 5 The special nozzle ...
Manufactured by:Mazda Limited based inAhemdabad, INDIA
The steam jet ejectors are pumps that mix or compress different fluids. They have no moving parts and operate by the action of one high pressure stream entraining steam ,air and other vapors (or liquids) at a lower pressure into the moving stream and there by removing them from the process system at an intermediate pressure higher than the suction pressure but many times lower ...
Manufactured by:Topas GmbH based inDresden, GERMANY
The particle concentration of the output aerosol can easily be adjusted over a wide range by changing the speed of the feed belt. The powder is removed from the belt by an ejector nozzle (similar to DIN ISO 5011). The new designed dust feeder SAG 410/U applies an innovative concept of a rotating stainless steel ring for dust dosing. By means of the ring very ...
Manufactured by:Alloy Carbon Steel based inMundka, INDIA
H13 can also be utilized in clear paintings applications because of its general hardness and longevity. H13 is a chromium molybdenum hot work metallic well known for its first rate warm hardness and abrasion resistance, making it ideal for a variety of hot work applications. Due to these challenges, H13 parts can be both time consuming and expensive to fabricate. ...
Manufactured by:Separator Spares International (UK) Ltd (SSI) based inRyde, UNITED KINGDOM
SSI offers a full range of alternative spares compatible with Alfa Laval Nirex fresh water ...
Manufactured by:Select GmbH based inHartmannsdorf, GERMANY
50 t/h is the maximum sorting capacity of the InLine keen eye sorting machine. Capacity depends on the number of lines installed in parallel and the product type and ...
Manufactured by:Transvac Systems Ltd based inAlfreton, UNITED KINGDOM
Ejectors offer an attractive solution for generating extra production from low pressure (LP) wells and thereby extending field life. Most commonly, shut-in or liquid loaded wells can be revived, as well as satellite or stranded wells deemed too expensive to recover with ‘traditional’ enhanced recovery ...
Manufactured by:Conforto S.r.l. based inMonselice (PD), ITALY
Single impeller electropumps (jap 80-100 m-t) or double impeller (jap 150-200-300 m-t) with axial intake and upward-facing radial ...
Manufactured by:Scanmudring AS based inMandal, NORWAY
The Scanhub design and production are based on thousands of hours of experience offshore with our Scanmachines and traditional standalone dredges. The result is durable, flexible and a reliable subsea power station, typical use are dredging, jetting and power/signal distribution ...
Manufactured by:PIAB AB based inTäby, SWEDEN
Ultra-lightweight decentralized ejector family with integrated release function. Release function based on Exhaust Block principle (EBR) or Atmospheric Quick Release (AQR) suitable for fast cycle speeds. The EBR-function can be manually activated with a built in EBR-button. EBR version available with enhanced blow-off – a shunt line for compressed air will amplify and speed up the part ...
Manufactured by:Venacontra based inKuopio, FINLAND
The VC-DAS system is developed specifically for aerosol sampling from high temperature process gases. It is designed to quench chemical reactions and aerosol transformation processes inside the sampling probe with a special diluting probe tip developed by Venacontra, thus minimising potential sampling ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 600 l capacity made of polythene, closed by a hermetic lid with an air ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 2500 l capacity made of plastic, closed by tightly fitting lid with an air vent ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 2500 l capacity made of plastic, closed by tightly fitting lid with an air ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 1000 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 400 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing ...
Manufactured by:Kujawska Fabryka Maszyn Rolniczych Spółka z o.o. based inBrześć, POLAND
Tank of 800 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing ...