Refine by
Applications
- Automated gas preparation systems solutions for environmental analysis industry
- Automated gas preparation systems solutions for petrochemical industry
- Automated gas preparation systems solutions for research and development industry
- Automated gas preparation systems solutions for specialty gas mixtures industry
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Flow Solutions for Emissions
Engine Emissions Testing Equipment & Supplies
24 equipment items found
Premium
Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)
In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...
Manufactured by:ARA Instruments based inEugene, OREGON (USA)
ARA 47mm Filter Cassettes are compatible with EPA Federal Reference Method PM10 and PM2.5 ambient particulate samplers and many engine emission test systems. Filter Cassettes are manufactured with precision and quality that exceeds published tolerances to ensure a consistent fit and ...
Manufactured by:Kane International Ltd based inWelwyn Garden City, UNITED KINGDOM
Exhaust Gas Analyser with 6 line display; Compact & quick to use with large display. Spot check faulty exhausts & catalytic converters. Test Diesel engine NOx emissions. Test warehouse indoor air quality. Check vehicle cab ...
Manufactured by:Taylor Power Systems, Inc based inClinton, MISSISSIPPI (USA)
The Taylor Power Systems diesel Reefer Generators are designed to provide highly reliable unattended continuous operation for all refrigerated ocean going container units in both over-the-road and rail transport modes. Built to last, Taylor Power uses only the highest quality materials in the production of its Reefer Generators. Each unit is fully load tested to ensure trouble free operations for ...
Manufactured by:Taylor Power Systems, Inc based inClinton, MISSISSIPPI (USA)
The Taylor Power Systems diesel Reefer Generator Set is designed to provide highly reliable unattended continuous operation for all refrigerated ocean going container units in both over-the-road and rail transport modes. Built to last, Taylor Power uses only the highest quality materials in the production of its Reefer Generator Sets. Each unit is fully load tested to ensure trouble free ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Counting particles emitted from engines is valuable in engine emissions research, and is a critical component in engine type certification according to the Particle Measurement Programme (PMP). The TSI Engine Exhaust Condensation Particle Counter (EECPC) Model 3790A is designed specifically for these needs and satisfies UNECE R83 requirements and is a very valuable tool for any customer who needs ...
Manufactured by:Kulite Semiconductor Products, Inc. based inLeonia, NEW JERSEY (USA)
These sensors can be found in the automotive test lab, at the proving grounds, on the racetrack and even the public highway. They are used to monitor aerodynamics, air bag systems, airspeed, brake pressure/antilock brake system testing, coolant pressure, dynamometer, engine oil pressure, exhaust system testing, fuel pressure, hydraulics system, in cylinder pressure measurement, intake manifold, ...
Manufactured by:Cummins Inc. - Cummins Emission Solutions based inColumbus, INDIANA (USA)
Cummins PowerCommand® X-Series Transfer Switch series rely on proven Cummins technology to deliver fail-safe performance in mission critical applications. But they’re just one component of a completely integrated power system that encompasses decades of application expertise, comprehensive system engineering, exhaustive testing and validation, and a global network of advanced electrical ...
Manufactured by:GRIMM Aerosol Technik GmbH & Co. KG - a member of the Durag Group based inHamburg, GERMANY
GRIMM DMAs feature the Vienna-type design (Reischl et al. 1997, Winkelmayr et al. 1990), well known for highest resolution and lowest diffusional losses even for small particles. GRIMM offers a flexible design of the Vienna-type DMA with two electrodes of different length to accommodate a variety of experimental needs. For the detection we offer two assorted product lines of CPCs described in ...
Manufactured by:Norres Schlauchtechnik GmbH based inGelsenkirchen, GERMANY
High-temperature hose, clamp profile hose (clip hose), (up to ...
Manufactured by:Kletti GmbH based inSandhausen, GERMANY
Our KLETTI analysis heating hoses are particularly employed in the automotive sector. Depending on the model, these are capable of measuring exhaust gases from 200°C to a maximum of 400°C. Dew point formation is reliably prevented, and the possibility of a distortion of the readings or a clogging of the hose through particles of dirt can be ruled out. Upon request, you can also receive ...
Manufactured by:AVL List GmbH based inGraz, AUSTRIA
Strict emission legislation and long test cycles, such as WLTC and hybrid cycles, are driving a significant increase in demand for emission testing. Furthermore, powertrain and testbed complexity are growing in order to deliver the flexibility required to address a range of different ...
Manufactured by:Norres Schlauchtechnik GmbH based inGelsenkirchen, GERMANY
High-temperature hose, clamp profile hose (clip hose), (up to ...
Manufactured by:Norres Schlauchtechnik GmbH based inGelsenkirchen, GERMANY
High-temperature hose, clamp profile hose (clip hose), multi-layer, insulating, suitable for slight overpressure (up to ...
Manufactured by:Neptech Inc. based inHighland, MICHIGAN (USA)
Heated sample probes from Flexotherm are designed for testing applications requiring the extraction and thermal control of gaseous emissions. Featuring stainless steel construction for maximum durability, heated sample probes from Flexotherm are tested and certified to function in temperatures up to 400º F. Standard sizes of 1/4” and 3/8” are available to accommodate the majority ...
Manufactured by:Tescor, a Link Group Company based inWarminster, PENNSYLVANIA (USA)
For maximum accuracy, repeatability, and stability, complete all of your environmental testing with our conditioned air supply systems. Delivering air at precisely controlled temperatures, humidity, and pressure conditions, our systems are able to provide for a wide range of applications and industries. Trust Tescor to build the conditioned air supply you need. The Conditioned Air Supply System ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The Real-Time, Quartz Crystal Microbalance (QCM) MOUDI™ impactor is a precision research-grade impactor with real-time mass detection based on QCM sensors. The impactor has a 2.5-µm inlet and six QCM stages with sharp collection efficiency curves and calibrated cutpoints of 960, 510, 305, 156, 74 and 45 nm at 10 L/min inlet flow rate. ...
Manufactured by:Servomex - a Spectris Company based inSugar Land, TEXAS (USA)
Combustion and Ultra-Low NOx emissions testing and monitoring in one simple analyser using a Chemiluminescence Detector (CLD). The versatile SERVOPRO NOx gas analyzer uses the time-proven Chemiluminescence detection method to measure NO or NO/NO2/NOx concentrations all in one analyzer perfect for continuous monitoring for industrial stationary sources ...
Manufactured by:AlyTech based inJuvisy sur Orge, FRANCE
Hurricane – Versatile tool to make really complex gas mixtures Diluting – Blending up to 16 gases simultaneously. The most powerful in GasMix™ family, this gas mixer/diluter can automatically prepare and deliver complex gases to virtually all kinds of analytical instruments, reactors, or ...
Manufactured by:Cubic Instruments (Wuhan) Ltd. based inWuhan, CHINA
Based on high-precision ultraviolet differential absorption spectroscopy gas analysis principle( UV-DOAS), our Gasboard-2201 NOx bench can accurately measure the engine emission gas concentration of NO, ...