Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Oxygen and carbon dioxide analyzers for pharmaceutical & small volume industries
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Flow Solutions for Emissions
- Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Exhaust Sampling Equipment & Supplies
51 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level restrictions. For ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler body. The axis of the sample container is inclined at an ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model LV-14M series is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor level. Filter holder is ...
Premium
Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA
GCOM-3000 VOCs Online Monitoring System is composed by VOCs monitoring subsystem, exhaust parameter monitoring subsystem, gas analysis module and system control & data acquisition subsystem. It can monitor organic pollutants in waste gas including methane, total hydrocarbon and non-methane hydrocarbon, low-carbon aldehyde ketone, benzene series (benzene, methylbenzene, ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model SRS-14MHT is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor level. The SRS-14MHT includes the GFCI protection and the card mounted filter holder with a quick disconnect ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
The Model LV34ME consists of a 3/4 HP oil-less vacuum pump with an airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying a bypass valve into the ...
Premium
Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA
GSP-100Ex explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas ...
Premium
Manufactured by:ECO Physics AG based inDuernten, SWITZERLAND
Unique in speed and reliability, the nCLD 811 CM is modular designed and allows the continuous analysis of NO, NO2, NOX, NH3 and NOX-Amines in raw exhaust gasses and other samples with NOX concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface also individually displays and connects to other instruments’ ...
Premium
Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)
In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register as a legally ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model LV-14MHT is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
The Model LV-34M consists of a 3/4 HP oil-less vacuum pump with an airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying a bypass valve into the ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model SRS-14MHTE is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor level. The SRS-14MHTE air sampler includes a 1/4 HP oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model LV-14ME is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm – 213 cm (4′ to 7′) above floor ...
Premium
Manufactured by:F&J SPECIALTY PRODUCTS, INC. based inOcala, FLORIDA (USA)
Model LV-14MHTE is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor ...
Manufactured by:Turner EnviroLogic, Inc. based inDeerfield Beach, FLORIDA (USA)
Turner EnviroLogic designs, fabricates and erects exhaust stacks of all types. Each exhaust stack is designed in accordance with ASME STS-1 standards. Each application is carefully analyzed taking into consideration wind responses, temperatures and the corrosive effects of the gases exhausted. Sampling ports, platforms and ...
Premium
Manufactured by:Quantek Instruments, Inc. based inGrafton, MASSACHUSETTS (USA)
The Quantek Model 905V is a pharmaceutical headspace oxygen analyzer. Use it for headspace oxygen analysis in pharmaceutical products – vials, blister packs, bottles, or difficult tubes of products (such as cosmetics). Achieve results with as little as 1cc of headspace. Pharmaceutical preparations packaged in vials are often gas-flushed to provide a specific atmosphere in the vial, with ...
Manufactured by:GRIMM Aerosol Technik GmbH & Co. KG - a member of the Durag Group based inHamburg, GERMANY
The GRIMM 7917 Emission Sampling System (ESS) is designed to sample aerosol particles directly from hot exhaust gas, e.g. from fireplaces, combustion processes or engine exhausts. The sampling probe (Ø 8 mm) can be directly connected to stacks and features a two-stage dilution system with integrated ...
Manufactured by:CerCell ApS based inHolte, DENMARK
Single-Use-Fermenter (SUF) in this small size is unique. Standard product which require no involvement of specialized help from CerCell. Thermal control (most often cooling) by liquid when inserted into the Heating-Support-Foot (HSF). 500 ml Vessel Volume BactoVessel mounted in Heating Support-Foot (pn 2262W). HSF mounted in SUB-Support-Square (SSS) (pn 2259-137-15) on MST (pn 2250-C-8B). Latest ...
Manufactured by:InstruQuest Inc. based inBoca Raton, FLORIDA (USA)
Complete solution for measurements of cement fineness, porosity, and density using automatic gas ...