Refine by
Filter Trough Equipment & Supplies
21 equipment items found
Premium
Manufactured by:Lenntech Water Treatment based inDelfgauw, NETHERLANDS
The liquid enters a cylindrical horizontal axis chamber and exits by both sides, trough filtering mesh rotating discs, all in stainless steel. The discs can separate solids as small as 30 microns, up until 350 microns, being easy to change the size of the mesh in site. The eliminated materials are automatically sent to the discharge mouths. ...
Manufactured by:LIQUI Filter GmbH based inEngen, GERMANY
The filter fabric together with its wire mesh band carrier forms a deep trough filter which permits continuous discharge of the filtrate into the liquid tank below. The depositing of contaminants on the filter fabric produces a filter cake which causes the liquid level in the trough ...
Manufactured by:AWI based inCalgary, ALBERTA (CANADA)
AWI Phoenix Backwash Troughs are designed, built and installed for municipal and industrial water treatment facilities. Fabricated from Stainless Steel or molded from fiberglass reinforced plastic, the Phoenix Backwash Trough has a design that can be adapted and installed into all filter configurations. Each trough is equipped ...
Manufactured by:Vivex Separation AB based inTumba, SWEDEN
DinoFilter Central Coolant management system consists of one or several filtration units (cassettes) which are assembled in the central unit. The contaminated fluid from the machining process enters the central unit into the dirty tank (filter tank). The contaminated fluid is sucked trough each filter cassette. The purified fluid is pumped to the ...
Manufactured by:Disab Vacuum Technology based inESLÖV, SWEDEN
The PES-301 units are a series of free standing vacuum units, to be used in conjunction with any type of filter separator. All DISAB PES-301 units are designed for, and shall always be used together with a filter separator. Vacuumed material shall not reach the DISAB PES unit but be collected and filtered in suitable model of ...
Manufactured by:POLO Filter-Technik Bremen GmbH based inAchim, GERMANY
The SKF POLO gravity filter cleans many different liquids fully automatically. The special feature is the trough formed by the transport chain, so that hydrostatic pressure is built up over the fleece. The fleece pre-clocking is controlled by a float switch, depending on the contamination. ...
Manufactured by:Triple R Europe based inAartselaar, BELGIUM
Triple R’s continuous investment in research and development delivers the highest standard of efficiency in oil filtration. Protecting your investments while boosting productivity. Our filter elements are designed to cleanse industrial oils, removing everything from solid particles to water to sludge, varnish and oxidation residues. 3 in 1, all within a single element - a Triple R unique, ...
Manufactured by:Disab Vacuum Technology based inESLÖV, SWEDEN
The DISAB PES-2S units are a series of free standing vacuum units, to be used in conjunction with any type of filter separator. All DISAB PES-2S units are designed for, and shall always be used together with a filter separator. Vacuumed material shall not reach the DISAB PES unit but be collected and filtered in suitable model of ...
Manufactured by:Disab Vacuum Technology based inESLÖV, SWEDEN
The DISAB PES-101 units are a series of free standing vacuum units, to be used in conjunction with any type of filter separator. DISAB PES-101 creates the vacuum and air volume needed for conveyance of bulk material or vacuum cleaning ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The Enviromulti storage and extraction silo is designed for difficult products such as sewage sludge. Enviromulti extractors consisting of several screws form a moving bed at the bottom of the tank. Thanks to the rotational movement, but also by the variation of the pitches and directions of rotation given to each of the screws, the sludge collapses in the threads and is directed towards the ...
Manufactured by:KNOLL Maschinenbau GmbH based inBad Saulgau, GERMANY
KNOLL scraper belt conveyors K are plants for transporting metal chips and small parts. Decentral use on individual and interlinked machine tools. Central use for waste disposal from machine groups and entire production areas. Suitable for short chips (e.g. steel, brass, aluminum, copper, cast). Suitable for wet and dry ...
Manufactured by:Protectolite Composites Inc. based inToronto, ONTARIO (CANADA)
PRO’DECK Cover panels are a composite of fiberglass reinforcements and a thermoset resin system. All components are produced by the pultrusion process. The standard resin system is a medium grey polyester resin and incorporates a corrosion resistant polyester surfacing veil on the outer surfaces. All PRO’DECK Cover panels are available in fire retardant and various resin grades and ...
Manufactured by:POLO Filter-Technik Bremen GmbH based inAchim, GERMANY
The POLO inclined bed filter SBV cleans many different liquids fully automatically. The well-known advantages of the POLO SB series have been completely incorporated here and expanded by vacuum technology. This combines the compact design with a high throughput ...
Manufactured by:Bokela GmbH based inKarlsruhe, GERMANY
BoVac Disc filters are modern high-performance vacuum disc filters which set new standards with their reliability and cost-effectiveness. They are characterized by extraordinary performance, an extremely large filter area and low space requirement. With regard to filtering and dewatering large quantities of suspension, these filters are ...
Manufactured by:Bokela GmbH based inKarlsruhe, GERMANY
High solids throughputs. Low residual moisture. Continuous operation. Minimal footprint. These are the strengths of the BoHiBar Disc filter. Particularly dry solids are achieved with BoHiBar steam pressure filtration. So dry that some residues even become ...
Manufactured by:WesTech Engineering, LLC based inSalt Lake City, UTAH (USA)
As part of the WesTech MULTIWASH® family, the MULTIWASH PRO trough can be added to almost any system (WesTech or others) either as a retrofit or upgrade. It is also available for use in new pressure filters and AERALATER® package plants. The MULTIWASH backwash process solves the media fouling and frequent backwash problems that can occur in today's ...
Manufactured by:Bokela GmbH based inKarlsruhe, GERMANY
Intensive filter cake wash. Low residual moisture. Gas-tight and completely leakproof operation. Complex process conditions. Minimal footprint. Such challenges master the continuous BoHiBar drum filters with flying colors. Particularly dry solids are achieved with BoHiBar steam pressure ...
Manufactured by:ANDRITZ Separation - ANDRITZ Group based inGraz, AUSTRIA
Vacuum drum filters are the most frequently used continuous rotary filters in solid/liquid separation. From gas-tight to pressure belt designs, living up to the latest ATEX requirements, they can be tailored to tackle various filtration challenges. Ease of operation, high adaptiveness and simplicity in design make Krauss-Maffei vacuum drum filters TSF simply a clever ...
Manufactured by:Filtration Services Limited based inMacclesfield, UNITED KINGDOM
The Rotavac One is our complete, compact pilot scale filter station. The Rotavac One comprises of: 1.3m² skid mounted rotary drum vacuum filter (RDVF). Filtrate receiver, Filtrate pump, Vacuum pump, Blower (scraper discharge version only), Local control panel. With a small 2m x 1m footprint, the unit is easy to install and operate. The filter is ideal for small volume applications, process ...
Manufactured by:Filtration Services Limited based inMacclesfield, UNITED KINGDOM
The Rotavac Lab is our lab scale rotary drum vacuum filter. The Rotavac Lab scale filter is generally used for product evaluation tests or as a preliminary step towards pilot scale and full-scale equipment trials. The unit is a fully functional and representative lab scale rotary drum vacuum filter and filtration ...