Refine by
Applications
- Heat transfer products solutions for the industrial refrigeration sector
- Channel Networks solutions for Seepage Water
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
Float Level Switch Equipment & Supplies
142 equipment items found
Premium
Manufactured by:NIVUS GmbH based inEppingen, GERMANY
The float switch is made for liquid level monitoring and is appropriate for direct pump control in all industrial ...
Manufactured by:Emco Controls A/S based inHillerød, DENMARK
The EMCO float level switches are designed to control the liquid level in vessels containing corrosive or non-corrosive liquids. The EMCO float switch can be mounted horizontally or vertically, but horizontal mounting is the most common. The float lever carries a permanent ...
Manufactured by:Tecfluid S.A based inSant Just Desvern, SPAIN
Float level switches. When a liquid reaches the level where the level switch is positioned, its float follows the level variations in a such way that the articulated rod is moved. A magnet placed in the opposite side of this rod activates a ...
Manufactured by:PKP Prozessmesstechnik based inWiesbaden , GERMANY
The float level switches FS00 work according to the lift principle. A hollow float is raised by the rising liquid until it reaches an angle of 45 ° from horizontal when switching takes place. The mercury free float switch can be mounted to the tank or container via a through ...
Manufactured by:Nivelco Process Control Co. based inBudapest, HUNGARY
The NIVOFLOAT float level switch is suitable for clean or slightly contaminated water. The NIVOFLOAT tilting-float level switch is for sewage, tanks, basins, or cisterns. The water- proof dual-chambered float is injection-molded polypropylene, and the microswitch is incorporated ...
Manufactured by:Elettrotec Srl based inMilano, ITALY
Body material: Brass. Float material: NBR. Mounting material: Anodized aluminium. Actuation point: LM1 – 1 actuation point contact NC/NO / LM2 – 1 actuation point contact SPDT / LMM1 – 2 actuation points NC/NO. Mounting: GA – Flange Ø 92 / GTA – Thread G2”. Electrical connection: DIN 43650 – PG09 – IP65. Switching capacity: LM1/LMM1 – ...
Manufactured by:Aranka Instruments LLP based inAhmedabad , INDIA
As a reputed Float Level Switch Manufacturer and Supplier in Ahmedabad, Aranka Instruments LLP provides highly reliable and economical level sensing solutions for a wide range of industrial applications. Our Float Level Switches operate on the simple principle of buoyancy — ...
Manufactured by:Sentec based inWuhou Dist, CHINA
SFL200 series float level switch is mainly composed of three parts: magnetic float, sensor and transmitter. 304 stainless steel, PVC, PTFE and other materials are used as protection pipes and installation fixings for the floating ball liquid level meter; for highly corrosive media, ...
Manufactured by:Flowline Inc. based inSignal Hill , CALIFORNIA (USA)
Offered in vertical and horizontal configurations, the general purpose mini-float level switches provide reliable liquid level detection of clean water and chemical solutions with a 15VA or 30VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid ...
Manufactured by:Waterline Controls based inScottsdale, IOWA (USA)
Traditional float switches work by opening and closing dry contacts to send electrical signals that set off a low water level alarm. Magnetic reed switches complete the circuit when the float reaches its lowest point. The magnet then disconnects once the water has reached an adequate level again, ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float level switch (NO or NC) is the economical version of the BIP STOP. Indeed, it is technically similar to the BIP STOP but equipped with a high quality PVC cable instead of a neoprene cable. Thanks to its wide switching angle of 100º, the BIP ECO protects the pump's engine and the electrical panels from jerking. ...
Manufactured by:Babbit International Inc. based inHouston, TEXAS (USA)
The MLS-4EX series multi-float level switch is a simple and reliable way to sense fluid levels. This multi-point unit provides a low cost method of monitoring multiple liquid level points inside of a tank or sump. MLS-4EX units are custom length and can be configured with “up to four” independent ...
Manufactured by:ZHOU ENSI LTD based inHongKong, CHINA
This PTFE Float Level Switch is produced by teflon PTFE plastic material, used in SPA Appliance, Sea Water Heating Systerm, Water Purification Equipment, Welding Equipment, Chlorine Liquid, Laser Systerm, to measure or control the lquid ...
Manufactured by:PKP Prozessmesstechnik based inWiesbaden, GERMANY
The FS10 level sensor is based on a float with magnetic transmission technology. The sensor is comprised of a guide tube with embedded Reed contacts, one or more floats with fitted ring magnets and a process connection module. The float is raised by the rising liquid in the tank and operates a Reed contact through the guide tube ...
Manufactured by:Sentec based inWuhou Dist, CHINA
SFLS300 series side mounted floating ball liquid level switch is based on the liquid buoyancy principle. When the floating ball moves up and down due to the buoyancy, the magnetic spring switch in the junction box is affected by the arm end magnet, and the "no" and "NC" contacts are exchanged. ...
Manufactured by:Valcom,a Brand of TERRANOVA based inMilano (MI), ITALY
LSG is a float level switch designed for liquid level control in marine and industrial fields. Typical applications are high and overfilling protection, water presence detection, high and low alarm level of liquids with or without foam. Inside the float is placed a toroidal magnet which drives, ...
Manufactured by:QXL Tech based inZhuhai, CHINA
The QXGF series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the QXGF magnetic float level switch are designed for a specific minimum fluid density (specific gravity), based upon the volume and weight of the ...
Manufactured by:Madison Company, Inc. based inBranford, CONNECTICUT (USA)
Float switch, stainless steel, 1/4" NPT, 60 watt. Detects high/low levels in a container. 316 SS is frequently used in food processing. Ideal for high-temperature, medical and petrochemical applications, as well as plating processes. Suitable in applications where superior corrosion resistance is required. All NPT vertical ...
Manufactured by:Rochester Sensors based inCoppell, MINNESOTA (USA)
LS-1000-BB Our brass Buna single level sensor is a low cost level switch good for fuel and oil level sensing. The Buna float is light and solid providing a reliable and durable level switch in compatible ...
Manufactured by:Gizmo Engineering based inSeneca Castle, NEW YORK (USA)
The LEVEL PROBE is a float switch mounted in the bottom of a polypropylene pipe. The float switch is protected inside the pipe. Pipe depth can be adjusted without tools by loosening the cord ...