Refine by
Applications
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Monitors, gas analyzers solutions for food and beverage safety sector
- valorGas - Biogas Enrichment System for Biological Desulfurization
- Water treatment chemicals for the steel and coke industry
- Kurita Geothermal Technology
- Stormwater Chamber for Engineers
- Membrane Filtration, Ion Exchange, Evaporation and Drying Solutions for Lithium Processing and Brine Treatment
- Water treatment chemicals for the manufacturing industry
Flow Reduction Equipment & Supplies
151 equipment items found
Manufactured by:IMW Clean Energy Compression based inChilliwack, BRITISH COLUMBIA (CANADA)
The CleanPRS system by IMW Industries is a high-capacity Pressure Reduction Station (PRS) designed to provide a reliable and continuous supply of compressed natural gas (CNG). This system can handle a flow rate of up to 2000 Nm3/h, allowing it to efficiently reduce the pressure of gas transported in bulk. ...
Manufactured by:Ayra Process Controls India Pvt Ltd based inGujarat, INDIA
The Orifice Plate is a fundamental device used in pipelines to gauge flow rates and manage pressure reduction through differential pressure. The principle it operates on involves creating a restriction within the pipe, which results in a pressure drop directly correlated to the flow rate. It is particularly favored across various industries due ...
Premium
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
- For distributing the steam mass flow to the relevant consumers - Reduction in network loss due to centralised distribution in systems with complex consumer structures - Savings thanks to centralised operation and maintenance Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions ...
Premium
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
Kurita's innovative and patented Cetamine® Technology has been developed for complete protection of steam generators, hot water boilers and closed systems. The Cetamine® Technology is based on surface-active film-forming amines for the formation of a hydrophobic protective film on surfaces in the whole system. This treatment program is frequently applied in low-pressure shell boilers and ...
Premium
Manufactured by:Kovalus Separation Solutions, Inc. based inWilmington, MASSACHUSETTS (USA)
The Eco-ROTM provides an optimized membrane operation for bulk TDS removal in applications involving higher TDS feed waters and/or high purity product waters. Eco-Tec’s team of engineers will design an application specific RO system to deliver maximum throughput with minimum waste, offloading much of the regeneration need of the downstream Recoflo ...
Manufactured by:Xore based inSkellefteå, SWEDEN
The purpose of the primary sampler is to reduce the large process flow. The reduction will be into a more modest amount of between 60-100 liters/minute. The primary samplers can be of different designs. For instance: sampling stations, pressure pipe samplers, tub samplers with cutters or a pump placed in a tub or ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Flow rate up to 400 ml/min. Flow rate reduction max 10%, 10÷100 lt dosed. Suitable for high viscous liquids (2500 mpa.s liquid viscosity with 8x12 tubes). Long life hose 1000 lt for compatible liquids. Modular construction for multiple pairing. ...
Manufactured by:Fukuda Co., Ltd based inNerima-ku, JAPAN
This is a flow tester equipped with a thermal gas flow meter. Reduction of measurement time and improvement of measurement accuracy are realized by installation of scan ...
Manufactured by:FUKUDA CO., LTD A Division of Nagano Keiki Group based inBowling Green, KENTUCKY (USA)
The FM-1061 series flow tester equipped with a thermal gas flow meter. Reduction of measurement time and improvement of measurement accuracy are realized by installation of scan ...
Manufactured by:AeriNOx Inc. based inEaton, COLORADO (USA)
Our systems use pump designs that accurately control the reductant flow from the storage tank to the dosing control system. This eliminates the pulsation phenomenon, enabling very low flow rates necessary for low engine loads. ...
Manufactured by:STELA Laxhuber GmbH based inMassing, GERMANY
Reduction in quantity of exhaust air. Reduction in emission mass flows. Reduction in specific thermal energy consumption. Large access points for easy maintenance and cleaning. Enclosed design allows it to be set up externally in temperatures down to -40°C (insulated dryer body). ...
Manufactured by:Titan Engineering and Automation Limited (TEAL) based inHosur, INDIA
Lean assembly concepts developed by TEAL aids in maximizing the overall efficiency of the solution. Reduction in WIP with single piece flow which leads to reduction in customers time to market. Assembly lines are conceptualized and designed eliminating all the MUDA or waste in the process. Few areas of waste eliminations considered in our ...
Manufactured by:GenPore a Division of General Polymeric Corporation based inReading, PENNSYLVANIA (USA)
Genpore’s porous plastic mufflers and silencers are designed to optimize noise reduction, air flow, and back pressure. Results are achieved by using a variety of custom molded configurations and carefully controlled pore ...
Manufactured by:INCYTON GmbH based inPlanegg, GERMANY
Made from high-tech medical-grade components, our sensor plate offers sterile and safe housing for your cells. The embedded microfluidic channels provide a stress-free media flow and the volume reduction coverlid assures a defined reaction space. Choose the most suitable sensor plate for your research ...
Manufactured by:Enpress LLC based inEastlake, OHIO (USA)
The design creates fluidity of the media bed and extends contaminant removal capacity; which means less regenerations and significant reduction of water use…saving water, salt and the environment, with backwash flow rate reductions of at least 30%. So it’s easy to go green and make a lot of green at the same ...
Manufactured by:Cerevast Medical, Inc. based inBothell, WASHINGTON (USA)
Pre-clinical and clinical studies of microsphere-mediated ophthalmic ultrasound have shown encouraging results as a non-invasive treatment for retinal vein occlusion leading to restored blood flow, reduction in intra-retinal hemorrhage volume and improved visual acuity ...
Distributed by:Construction Fabrics & Materials based inCottage Grove, WISCONSIN (USA)
Erosion Eels can be placed at the top, on the face, or at the toe of slopes to intercept runoff, reduce flow velocity, releasing the runoff as sheet flow, and provide reduction/removal of suspended solids from the ...
Manufactured by:OTSO Energy Solutions, LLC based inHouston, TEXAS (USA)
OTSO’s SplitFLOW is the go-to option for applications where flow velocity reduction is of primary concern. The dual flow design splits inlet flow velocity in half, resulting in a dramatic reduction in flow velocity. The SplitFLOW separator is also the clear economical choice for these ...
Manufactured by:G.E.T. Industries Inc. based inCaledon, ONTARIO (CANADA)
The comminutor shall be designed to handle the flows indicated below, within the head loss noted., , hydraulic capacity 3.5 MGD (13200m3/day), , satisfactory operation shall occur under conditions of zero flow, , head loss at peak flow shall not exceed 15 inches (380), , design shall be such that the flow enters the size ...
Manufactured by:G.E.T. Industries Inc. based inCaledon, ONTARIO (CANADA)
The comminutor shall be designed to handle the flows indicated below, within the head loss noted., , hydraulic capacity 20 MGD (75,700m3/day), , satisfactory operation shall occur under conditions of zero flow, , head loss at peak flow shall not exceed 30 inches (762), , design shall be such that the flow enters the size ...