Refine by
Applications
- Magnetic Drive Pump for Biofuels
- Magnetic Drive Pump for Chemical Processing
- Magnetic Drive Pump for Food and Beverage
- Magnetic Drive Pump for General Industry
- Magnetic Drive Pump for Phamaceutical
- Magnetic Drive Pump for Pulp and Paper
- Magnetic Drive Pump for Semiconductor
- Magnetic Drive Pump for Wastewater
- Magnetic Drive Pump for Water Treatment
- Liquid/solid separation equipment for oil sands
- Liquid/solid separation equipment for refinery, chemical and petrochemical
- Liquid/solid separation equipment for coal mining and preparation
- Liquid/solid separation equipment for mineral processing
- Liquid/solid separation equipment for paste thickening and backfill
- Liquid/solid separation equipment for tailings
- Industrial solutions for power and cogeneration industry
- Industrial solutions for pulp and paper industry
- Mining & minerals solutions for acid mine drainage industry
- Agitation and mixing solutions for bio technology
- Lightweight Systems for Wastewater Treatment
Fluid Dynamics Equipment Supplied In Canada
52 equipment items found
Distributed by:Promag Enviro Systems Ltd. based inBurnaby, BRITISH COLUMBIA (CANADA)
Improving System Performace With Automatic Siphons What the Siphon Does The automatic siphon system stores liquid in a tank until a certain elevation of the liquid is reached (the high water line), then the siphon automatically comes into operation and rapidly drains the tank to the low water line. When the low water line is reached, the siphon shuts off and stops the flow of ...
Manufactured by:Norcan Hydraulic Turbine Inc. based inCarleton Place, ONTARIO (CANADA)
Norcan Hydraulic Turbine Inc. has offered CFD design with Swiderski Engineering in developing state of the art runner and turbine designs, using Computational Fluid Dynamics (CFD) technology. Combined with our in house engineering, shop and field services this allows us to provide the most efficient and improved modern ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
Fluid Dynamics dynaBLEND® dilutes, mixes and thoroughly activates emulsion, dispersion and solution polymers including new high molecular weight ...
Manufactured by:Canada Pipeline Accessories based inCalgary, ALBERTA (CANADA)
The CPA 55E and 65E use an innovative unique stepped design that has been optimized with fluid dynamic fundamentals in mind, giving greater capability over other flow ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
Utilizing Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD). Newly designed trunnion bearings with "Figure 8" grease channels (Standard). External lubrication ports for both upper and lower bushings (Standard). Modified Scotch Yoke design to enhance lift and torque capabilities (Standard). ...
Manufactured by:RMG Messtechnik GmbH based inButzbach, GERMANY
TRZ03-K stands for the RMG volumeter series of turbine meters which are characterized by their compact design. This compact design does curb cost, but the compact design also makes this device more "sensitive" in their fluid dynamics. On the other hand, the high degree of reproducibility of the measured values is a feature that the Volumeters have in common with ...
by:Babcock & Wilcox based inCharlotte, NORTH CAROLINA (USA)
This gives you a better combustion process and burn-out in the gas phase. The system is installed at the inlet of the first pass. VoluMix™ is designed on the basis of Computational Fluid Dynamics (CFD) modelling. CFD programs are advanced calculation tools for computations of three-dimensional turbulent flow with heat and mass transfer. Since 1996 CFD ...
Manufactured by:GrayWolf Sensing Solutions based inShelton, CONNECTICUT (USA)
GrayWolf also offers pitot-static tubes made from SS304 stainless steel, available in standard lengths with ellipsoidal tips, suitable for use with AdvancedSense and Zephyr meters. These high-quality materials and designs provide reliability for demanding applications in fluid dynamics and HVAC systems, making them an ideal choice for professionals seeking robust ...
Manufactured by:AIC Inc. based inOakville, ONTARIO (CANADA)
A collaboration of practicality, versatility, durability, and a dash of novelty, the LENS heat exchangers break the mold with a new multi-functional, multi-dimensional, transformative ingenuity opening doors to unprecedented possibilities in fluid dynamics and process control. The strength of the LENS series lies in its adaptive nature, allowing customization ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The DMX-RO pump is built for high-pressure, heavy-duty membrane feed services used typically in seawater reverse osmosis (SWRO) applications. Hydraulics are designed with advanced computational fluid dynamics (CFD) to provide best system performance and minimize operating expenses. The pump’s comprehensive hydraulic range permits precise selection to ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
The L4-P / L6-P series offers the same features and benefits of the L4-D / L6-D series, yet utilizes a progressive cavity pump. The progressive cavity pump is strongly recommended due to increased reliability over diaphragm pumps that rely on check ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
The L8-P / L12-P series offers the same features and benefits of the L6-P series and is designed for higher water and polymer flow ...
Manufactured by:Cleaver-Brooks based inThomasville, GEORGIA (US) (USA)
FLX has distinct design features that include non-welded ferrule tubes for ease of tube replacement; removable sectioned side panels permit full access to all tubes. FLX boilers are a 5-pass cross flow water tube design, optimized through computational fluid dynamics to maximize heat transfer thru every pass. Unlike competing designs, FLX features a water-cooled ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
Knowing the facts behind polymer blending is the first step in understanding the numerous benefits of the dynaBLEND™ technology. Over the years, the spectrum of polymers available has widened and today there are more difficult-to-blend polymers than ever before. This is especially important because some polymer blending systems work well on simple-to-blend polymers, but fail at effectively ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
A pressure drop occurring across the specially designed variable orifice water control valve produces a high velocity water jet. This water jet, traveling at approximately 70 ft. per second, is aimed directly at, and impinges on, the polymer as it enters the mixingchamber. At this point, the only point where high energy exists in the mixing chamber, the polymer is coiled up and not susceptible to ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
The L4S miniBLEND Liquid Polymer Blending System provides the same reliable, effective HydroACTION blending action in a lightweight and portable ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
The dynaJET technology utilizes a blower-assisted conveyance system to transport and disperse the dry polymer prior to wetting. The dynaJET technology is typically applied on applications: Requiring more than 9#/hour of polymer, When the polymer transfer distance is more than 20'(from the volumetric feeder to the mix ...
Manufactured by:cleanwater1, Inc. based inPoway, CALIFORNIA (USA)
The dynaBLEND technology utilizes a negative pressure conveyance system to transport and disperse the dry polymer prior to wetting. The dynaBLEND technology is typically applied on applications: Requiring up to 9#/hour of polymer (typically up to 180gallon tanks), When the polymer transfer distance is less than 20' (from the volumetric feeder to the mix ...
Manufactured by:Canadian Hydro Components Ltd. (CHC) based inAlmonte, ONTARIO (CANADA)
CHC has provided pit-type axial flow turbines to a number of hydro projects over the years, improving the design with each installation. Thanks to its research and development team, CHC has perfected this equipment configuration in order to not only improve its operation and performance, but also to increase profitability for project owners. Now working with its third generation design of pit ...
Manufactured by:Wavefront Technology Solutions Inc based inEdmonton, ALBERTA (CANADA)
Wavefront’s patented Powerwave process is an injection technology that improves the flow of fluids in geological materials including sedimentary soils and fractured rock. These materials are composed of a solid matrix and pore structure, which contain fluids such as oil and gas. These fluids move through pore networks in preferential flow paths established during the formation of the ...