Refine by
Forestry Mower Equipment & Supplies
15 equipment items found
Manufactured by:O.S.M.A snc based inPalazzo Pignano (Cr), ITALY
Forestry mover for shrubs, dense vegetation and small plants, apply on midi-excavators with weights from 5.0 up to 7.5 ton and powers up to 70 HP. Installable on professional brush cutter arms with a hydraulic piston pump. Max cutting 10 ...
Manufactured by:O.S.M.A snc based inPalazzo Pignano (Cr), ITALY
Flail mower (semi-forestry range) for grass, branches, bushes and small trees, suitables to SPIDER-excavators with weights from 6,5 Ton up to 11,0 Ton, with power up to 120hp. Max. working diameter of 8-10 ...
Manufactured by:Teagle Machinery Ltd. based inTruro, UNITED KINGDOM
Available in three cut widths from 1.15m, 1.25m, 1.45m. Suitable for mulching light grass and general amenity areas. From 12HP to 25HP / Category 1 linkage . PTO speed 540 rpm. Rear mount only ...
Manufactured by:Deleks S.r.l. based inVerolanuova (BS), ITALY
100cm working width, Electronically balanced rotor, with hammers or blades | DELEKS APE-100 for small tractors 12-30Hp, Pto shaft included. The APE-100 flail mower has been designed for low-powered tractors e.g Kubota BX-B, Iseki, Yanmar, John Deere 1-2 Series, Pasquali, etc. 12-30Hp, for garden and farm use. Heat forged hammers for grass, thicker vegetation and small twigs. Cutting height can be ...
Manufactured by:Deleks S.r.l. based inVerolanuova (BS), ITALY
120cm working width, Electronically balanced rotor, with hammers or blades | DELEKS APE-120 for small tractors 16-30Hp, Pto shaft included. The APE-120 flail mower has been designed for low-powered tractors e.g Kubota BX-B, Iseki, Yanmar, John Deere 1-2 Series, Pasquali, etc. 16-30Hp, for garden and farm use. Heat forged hammers for grass, thicker vegetation and small twigs. Cutting height can be ...
Manufactured by:CGA Ricambi based inModena, ITALY
Ideal for cleaning canals, shores or for the simple grounkeeping of parks or gardens in general. The reversible flail mower heads are symmetrical with the same inlet and output, to allow cutting in both directions adapting to the rotation of the excavator for a continuous cut in any conditions. Flail mower LS 30.5N Forestry flail ...
Manufactured by:Rayco - Manufactured by Morbark based inWinn, MICHIGAN (USA)
Rayco’s powerful new T415 forestry machine allows customers to change between a Predator forestry mower/mulcher head and a Hydra-Stumper stump cutter attachment for the ultimate in high production versatility. For mowing/mulching applications, the Predator mulcher head has a 7'7"” (2.3 m) cutting width and is powered by a pair of ...
Manufactured by:Industrias Belafer S.L. based inFraga, SPAIN
Special forest flail mower for forestry works, undergrowth and areas under electricity power lines. The several models of DFR/DFRE are high performance machines which are versatile in forest environments, ideal for hills, jobs and clearing of bushes, forest firebreaks, weeding of overabundant vegetation and creation of pasture lands for livestock. ...
Manufactured by:LUF GmbH based inThüringen, AUSTRIA
LUF has opened a new branch with the development of the LUF Bush-Fighter™. The LUF Bush-Fighter™ is a radio remote controlled multi-equipment carrier which can transport f.e.: Forestry mulchers, stump grinders, mowers,... to inaccessible places. Banks up to 45° can be handled by the machine in all directions. It's an world - innovation cause now ...
Manufactured by:Industrias Belafer S.L. based inFraga, SPAIN
Forest flail mower shredder with floating hammers for low hills, work between lines of trees, forestry, etc.the tbf-marine semi forest shredder is especially appropriate for caterpillar ...
Manufactured by:Rayco - Manufactured by Morbark based inWinn, MICHIGAN (USA)
When you go into the woods, you need a machine you can count on. You need a loader-style mulching machine that’s purpose built from the ground up to be the most productive and reliable in a mulching application. The C100 is that machine. It’s equipped with a 99.2 hp Kubota engine and Rayco’s exclusive Super Flow closed loop, hydraulic system, providing 39 gal/minute at 5,500 psi ...
Manufactured by:Rayco - Manufactured by Morbark based inWinn, MICHIGAN (USA)
Rayco’s new C100R Forestry Mulcher is the answer if you’re looking for a purpose-built mulcher but need the versatility of rubber tracks. Our customers demanded a mulcher that was capable of crossing roadways and sensitive turf but still had the power and in-woods characteristics of a dedicated forestry machine. The C100R answers that call. It rides on a 17.7-inch wide steel-imbedded ...
Manufactured by:Diamond Mowers, LLC. based inSioux Falls, SOUTH DAKOTA (USA)
Tractor booms enable operators to clear ordinarily hard-to-reach trees and brush and allow operators to perform a wide range of functions like sawing and mulching. These booms and their attachments will add the versatility you need for everyday ...
Manufactured by:Fecon, Inc. based inLebanon, OHIO (USA)
Hydraulic driven Bull Hogs are configured to provide the best combination of cutting tools, width, weight, and driveline options for operation on open-loop, load sense, or closed-loop hydraulic systems up to 600hp! Whether you prefer tracked or wheeled prime movers, big or small, to climb slopes, cross wetlands, or drive down paved roads, you can count on the proven reliability and performance of ...
Manufactured by:Fecon, Inc. based inLebanon, OHIO (USA)
Add versatility to your business with Bull Hog mulching attachments for excavators. The incredible performance and durability of the Bull Hog will lead you to excellent productivity, even in hard-to-reach places. Attached to an excavator, the Bull Hog forestry mulchers are perfect for clearing trees and brush along roadsides, ravines, creeks, riverbanks, and places that could otherwise be ...