Refine by
Fresnel Reflection Equipment & Supplies
7 equipment items found
Manufactured by:Hellma GmbH & Co. KG based inMüllheim, GERMANY
This allows the usage of BaF2 as broadband optical material in the VIS and IR dual-channel systems for visible and thermal imaging. BaF2 has a lower refractive index than many other optical materials. This reduces transmission losses caused by ...
Manufactured by:Hellma based inPlainview, NEW YORK (USA)
This allows the usage of BaF2 as broadband optical material in the VIS and IR dual-channel systems for visible and thermal imaging. BaF2 has a lower refractive index than many other optical materials. This reduces transmission losses caused by ...
Manufactured by:IRFlex Corporation based inDanville, VIRGINIA (USA)
Chalcogenide As2S3 and As2Se3 glass fibers offer broad transmission range with low propagation loss from 1.5µm to 6.5µm and from 1.5µm to 10µm relatively, with high non-linear coefficient, small and negative index change with temperature (dn/dT), excellent power handling capability, and are chemically ...
Manufactured by:InnovaQuartz LLC based inPhoenix, ARIZONA (USA)
Hollow waveguides consist of a silica capillary with an ID coating of silver covered in a thin dielectric film. This internal coating is optimized to provide efficient transmission of 10.6 µm infrared radiation from a CO2 laser source. ...
Manufactured by:Tydex based inSt.Peterburg, RUSSIA
FTIR spectrometer is generally based on Michelson interferometer where one of the mirrors is movable. Two mirrors are located at both arms of interferometer and oriented perpendicularly to each other. Beamsplitter is placed at the vertex of the right angle and oriented at a 45° angle relative to each mirror. Light passing to the beamsplitter is divided into two parts (50%/50% ideally) those ...
Manufactured by:Polytec, Inc. based inHudson, MASSACHUSETTS (USA)
Dynamic characterization of MEMS devices to measure and visualize mechanical response is important for product development, trouble shooting and FE model validation. The MSA Micro System Analyzers from Polytec provide fast, accurate optical measurements of out-of-plane (OOP) and in-plane motion (IP). Until now, this has been limited to unpacked devices that are optically accessible. Now, the ...
Manufactured by:Evaporated Coatings, Inc. (ECI) based inWillow Grove, PENNSYLVANIA (USA)
ECI produces thin-film coatings using a variety of different deposition methods, our most advanced deposition method is Ion Beam Sputtering (IBS). Ion Beam Sputtering produces coatings that are very dense with low surface roughness. Another advantage of IBS thin-film coatings is that they exhibit superior thermal stability. IBS coatings can withstand exposure to temperatures up to 300°C for ...