Refine by
Fuel Cell Material Equipment & Supplies
39 equipment items found
Manufactured by:Advent Technologies Inc based inBoston, CONNECTICUT (USA)
MEAs (Membrane-Electrode Assemblies) are the heart of the fuel cell. Due to the high-temperature operation, our MEAs can work with impure hydrogen that can be reformed onboard from methanol, natural gas, and other renewable fuels (liquid sun, liquid ...
Manufactured by:Hephas Energy Corporation based inHsinchu, TAIWAN
HTS series are fuel cell membrane electrode (MEA) test and evaluation equipment. HTS station have temperature, humidity and pressure control systems, combined with fuel cell low voltage and high current power generation. It is used for MEA polarization curve analysis, endurance analysis, and pressure test analysis. It also is equipped with electrochemical analysis function, which can ...
Manufactured by:Xiamen TOB New Energy Technology Co., Ltd. based inXiamen City, CHINA
TOB New Energy offers fine grade Lanthanum Strontium Manganite Cathode Powder (LSM) for fuel ...
Manufactured by:Plug Power Inc. based inLatham, NEW YORK (USA)
GenDrive Class 3 fuel cell-powered pallet jacks run at full power, maintaining rapid momentum during an entire shift, even in environments with temperatures as low as -22oF. Time spent dealing with depleted batteries is now regained for revenue-generating work. ...
Manufactured by:Plug Power Inc. based inLatham, NEW YORK (USA)
Our electric Class 1 fuel cell products for forklift power exceed the demanding requirements of high-volume manufacturing, warehousing, and distribution operations. By using fuel cells, your trucks will transport more heavy pallets faster, improving ...
Manufactured by:Plug Power Inc. based inLatham, NEW YORK (USA)
GenDrive Series 2000 Class 2 fuel cell products elevate vehicle performance to exceed the demanding requirements of high-volume manufacturing, warehousing, and distribution operations. Your material handling fleet will lift heavy loads with consistent speed, maintaining momentum during an entire shift, even in environments with temperatures as ...
Manufactured by:Zapp Precision Metals GmbH based inSchwerte, GERMANY
Our Alloy 718 tubes are available as sleeves for electrical air compressors in fuel-cell vehicles. The material offers the following advantages: extremely high tensile strength, not magnetizable. Heat treatment and mechanical processing for tight tolerances are carried out in-house. Bipolar plates are made of thin precision tape, such as ...
Manufactured by:Fuel Cell Materials, Division of Nexceris Company based inLewis Center, OHIO (USA)
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...
Manufactured by:Fuel Cell Materials, Division of Nexceris Company based inLewis Center, OHIO (USA)
Lanthanum strontium cobalt ferrite (LSCF) is a well characterized SOFC cathode material for solid oxide fuel cells operating temperatures of 800 °C and lower. The fuelcellmaterials premium powder line is designed to provide high performance and fully characterized materials with unparalleled quality and batch-to-batch ...
Manufactured by:Fuel Cell Materials, Division of Nexceris Company based inLewis Center, OHIO (USA)
This 10% gadolinium doped ceria powder has a high surface area, between our TC grade and nanoscale powders. This “M” grade powder is great for ink fabrication, tape casting, and pellet processing. The higher surface area of this ceria powder provides a greater catalytic activity when using this powder in any of these ...
Manufactured by:Fuel Cell Materials, Division of Nexceris Company based inLewis Center, OHIO (USA)
This composite cathode powder is a 50/50 wt% mixture of lanthanum strontium cobalt ferrite and Gd-doped ceria, and is typically used as the first layer in a two-layer cathode, where the second (top) layer is pure LSCF. This two-layer approach provides higher performance than single-layer LSCF cathodes, and can be used with all ceramic electrolyte materials. A ceria barrier layer is recommended ...
Manufactured by:Fuel Cell Materials, Division of Nexceris Company based inLewis Center, OHIO (USA)
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...
Manufactured by:eDAQ Pty Ltd based inDenistone East, AUSTRIA
This is an economic, high precision potentiostat/galvanostat/impedance analyzer especially designed for electrochemical research with batteries, fuel cells, corrosion, sensor and solar cells. It is supplied with three software packages: BATe control software specific to battery and fuel cell research, CORe ...
Manufactured by:eDAQ Pty Ltd based inDenistone East, AUSTRIA
This is a high-precision potentiostat / galvanostat / impedance analyzer, able to work up to 2 amps with 10 volts compliance voltage, designed for high-current electrochemical research with batteries, fuel cells, corrosion, sensor and solar cells. It is supplied with three software packages: BATe control software specific to battery and ...
Manufactured by:Nexceris based inLewis Center, OHIO (USA)
This composite anode ink offers good adhesion to the dense electrolyte surface which can enhance your overall cell performance. This ink is made using our quality ink manufacturing processes that provide a screen printable ink for easy incorporation into your own cell manufacturing ...
Manufactured by:Alleima AB based inSandviken, SWEDEN
The low-cost stainless-steel substrate delivers economy and durability for 2D and 3D plates. The multi-layer graphite surface offers high corrosion resistance, low gas permeability and enhanced conductivity. Add an integrated approach with fewer steps and less logistics and more efficient industrial mass production of 3D bipolar plates for PEFC is all ...
Manufactured by:Nexceris based inLewis Center, OHIO (USA)
Our nickel ink is an excellent contact paste for SOFC testing, and is especially good for enhancing the electrical contact on the anode side of a cell during fuel cell testing. The nickel ink can also be used as a reference electrode, but any electrical testing with the nickel paste will require that the sample be under a reducing gas to maintain good electrical ...
Manufactured by:i2m LLC - a MANN HUMMEL Company based inRaleigh, NORTH CAROLINA (USA)
Our ion exchange filter is available in four sizes. It can be installed in multiple directions to cover a wide range of applications and meet all customers’ requirements. This is why our product is called PROTECT+ion ...
Manufactured by:SURAGUS GmbH based inDresden, GERMANY
Contact-free & real-time. Accurate sheet resistance measurement of conductive thin films with a sample size up to 200 x 200 mm. Film thickness measurement of metal films (nm, µm). Substrate thickness monitoring (µm). Characterization of encapsulated layers and multilayer systems. ...
Manufactured by:Baoji Yinggao Metal Materials Co., Ltd. based inBaoji City, CHINA
1. Electrode Support Material 2. Flow Field Plate 3. Catalyst Layer ...