Refine by
Gas Engine Emissions Equipment & Supplies
43 equipment items found
Manufactured by:Cubic Instruments (Wuhan) Ltd. based inWuhan, CHINA
Based on high-precision ultraviolet differential absorption spectroscopy gas analysis principle( UV-DOAS), our Gasboard-2201 NOx bench can accurately measure the engine emission gas concentration of NO, ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
Integrating Air-Fuel Ratio (AFR) controls and Catalyst diagnostics for advanced natural gas engine emissions control and management. CCC technology is the key to integrating Air Fuel Ratio controls (AFR) and Catalyst diagnostics for advanced natural gas engine emissions control and management. ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
Manufactured by:Solmec SpA based inRovigo, ITALY
Important worldwide innovation in the rehandling machines sector: the production of the first model completely electric powered. At least Tor the next decade, the electric power will remain the only alternative to the diesel engines: the supply through accumulators ensure the same performances of the standard diesel version. The Solmec EXP50ZE is designed to work continuously for ...
Manufactured by:Wuxi Global Power Technology Co., Ltd. based inWuxi City, CHINA
Low noise and high emission standard: meet the emission standard of 1 / 2 taluft. High economy: four top cylinder valves are adopted to optimize air flow control and perfect mist injection of fuel injection nozzle to ensure rapid combustion and economy. Stability and reliability: adopt process technology development and testing, adopt advanced multi-point ...
Manufactured by:Hobi Egzoz based inSilivri, TURKEY
In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. Exhaust manifolds are generally simple cast iron or stainless steel units which collect engine exhaust gas from multiple cylinders and deliver it to the exhaust ...
Manufactured by:Maxim Silencers based inHouston, TEXAS (USA)
The Maxim RAC Quick-Access series of catalytic silencers is the ultimate solution for natural gas internal combustion engine emission control in any environment. Easy to install and simple to maintain and operate, RAC silencers are designed to work efficiently and economically over a long, trouble-free life span. We offer the flexibility and ...
Manufactured by:Monoxivent based inRock Island, ILLINOIS (USA)
UnderDuct, by Monoxivent, is pleased to announce our new product: UnderDuct-VE. The corrosion resistant underfloor exhausting duct is rated to 325-degrees F. The duct does not need concrete encasement. The duct's smooth bore allows for more efficient airflow and less pressure ...
Manufactured by:Caterpillar based inPeoria, ILLINOIS (USA)
A flow through substrate coated with a high performance catalyst and housed within a stainless steel canister. Optional silencing available. Applicable to rich burn gas engines. A flow-through honeycomb substrate coated with a high performance catalyst and housed within a stainless steel canister. Optional silencing available. Applicable to rich burn ...
Manufactured by:CERACOMB based inAsan-si, SOUTH KOREA
It uses engine exhaust heat (emission gas heat) to collect PM emitted from the engine in a DPF filter, continuously regenerating the filter, and can be applied even under lower temperature conditions than existing products.(A device that combines DOC and DPF reduces HC and CO in DOC using engine exhaust ...
Manufactured by:PMT Tech based inTrichy, INDIA
Engine exhaust silencers are offered in three types to reduce undesirable sound. The type of DG exhaust silencer is selected based on the noise ...
Manufactured by:FKAB Marine Design based inUddevalla, SWEDEN
The FKAB design is a bitumen, chemical and product oil tanker with independent cargo tanks for bitumen and asphalt with a temperature of up to 250°C. The vessel is designed with single bottom and double sides for ballast ...
Manufactured by:Colchester Engineering Systems (CES) based inColchester, UNITED KINGDOM
Our enclosures or canopies are designed to suit the customer's exact ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
When methane is used as a fuel in a gas engine it is burnt and converted to carbon dioxide and other trace elements. This carbon dioxide is released as a hot gas in the CHP plant ...
by:Organics USA, Inc. based inSheridan, WYOMING (USA)
An alternative to destroying the stripped ammonia is recovery with the use of an acid scrubber. The Advanced Thermal Ammonia Stripper with Ammonia Salt recovery has been developed and patented by Organics to provide a fundamental option for disposing of, or benefiting from, ammonia removed from wastewater streams. Typically, nitric, sulphuric or phosporic acid may be used to create the ammonium ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
The MEXA-1400QL-NX is an exhaust gas analyzer for four nitrogen compounds simultaneously,i.e. NO, NO2, N2O and NH3, utilizing mid-infrared Quantum Cascade Laser technology. By using the high power, high resolution lasers, the analyzer can measure each component accurately,even in low concentrations, with minimum interference from other components in engine exhaust gas. It is suitable for the ...
by:Organics USA, Inc. based inSheridan, WYOMING (USA)
An alternative to destroying the stripped ammonia is recovery with the use of an acid scrubber. The Advanced Thermal Ammonia Stripper with Ammonia Salt recovery has been developed and patented by Organics to provide a fundamental option for disposing of, or benefiting from, ammonia removed from wastewater streams. Typically, nitric, sulphuric or phosporic acid may be used to create the ammonium ...
Manufactured by:Kelco Industries based inWoodstock, ILLINOIS (USA)
The latest in the Guardian Electric family of flight control grips. This grip is the state of the art for fly by wire active control for today’s most advanced commercial aircraft. It is designed to eliminate the need of traditional control columns and allows designers to save space in the cockpit and create better comfort for pilots. It features leather wrapped comfort along with ergonmic ...
Manufactured by:Plymovent Group BV based inAlkmaar, NETHERLANDS
The MEN is designed to cover an exhaust gas temperature in a range up to 550°F (300°C) continuous or up to 1200°F (650°C) intermittent. Recommended for engine testing and natural gas engine service facilities. ...